Zeroing the Wildguarder NR1 Night Vision sight at 15 yards for ratting
HTML-код
- Опубликовано: 20 дек 2022
- In this video I zero in the Wildguarder NR1 Night Vision Sight for ratting at 15 yards. This now gives me three rifles zeroed for the task with Bisley Magnum pellets. The video after this will show one of the three rifles shooting rats at the range.
Well done on your continued ratting. Look forword to the next video 😎👍
You're up bright and early.
Merry Christmas
Yes, I was out until 1:40 this morning ratting. Got a massive one at about 12:10. Youll see it in the next video.
🎯 Mr AS-E 👍🏻✌🏻
Excellent video mark 👍🏻
Thanks Simon. The follow up video will be broadcast at 07:00 hrs Friday morning, showing the results down at the range, and a monster rat to boot.
How do you actually change the zero , I just bought one and cant find how to do it in the instructions
Hi mark
What ft lb was it running at with the bisley Mags? In my r10 I get about 11.1 ftlb. Should it be higher?
Wayne
My R10 is averaging around 11.8 ft/lbs. If you remove the rifle from the stock you can unscrew the cap at the rear and turn the adjuster clockwise to increase it. If the cap is too tight, it may have locktite on it, in which case you can put heat on it to melt the locktite and you will be able to unscrew the cap. Make sure you have a chronograph to test it afterwards. If you look back through my videos you'll see how its done.
@@airgunsniper-elite7385
Hi mark
Thanks for the reply. I just looked at video and give it a go. Got chrony to check power, also got normal assortment of pellets, so I’ll try different weights to make sure don’t go over 12ft.
Wayne
The NR1 screen resolution is horrible.
It's NOT even dated bad resolution of 720P & you have to constantly have to re-focus your target & worst not enough zoom power.