Thanks for the video, looks easy enough and the safety tips help. Any idea how much the dents in pipe reduce performance? The link to purchase kit is not working.
@@Pleasant-Peasant-789 just search on eBay you’ll find it. If you have small dents I wouldn’t worry about it, if you have big dents they say it makes a difference
Drill hole screw in bolt mole grips pull out Fill hole spot of weld and if you didn't have welder you could leave the bolt in , that's the cheap version
You need more pressure and more heat.. needs to be cherry red/ red hot, work the heat around the dent, then up and down the dent, use the heat to regulate how far the dent comes out..
It’s like my torch isn’t hot enough I couldn’t get the whole dent to glow red only about a little 1/2 inch circle would glow red if I held the torch in one spot but if I tried moving it around s little the red would immediately fade.
Sei limitato uno deve anche distrarsi per me è cosa nuova ti assali occhi 👀 o che poi uno molla giù su si ammacca nn è abituato fa come l u di storia i tuoi amici .
It's a pipe lol. You would buy a new hunk of metal to guide air through🙄 seems a little excessive to me considering there are absolutely zero risks to running a repaired pipe. You're a good little consumer aren't you
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
3 in a week?! YOU'RE A MADMAN!
You have to heat the metal more and raise the pressure to 90+. It will be perfect. Try again.
Like the trick with the zip ties 👍
It’s a game changer
I'm need to try and remember that one!
@@MrBryant240sx I forgot all about it till now, thanks for reminding me lol
Thanks for the video, looks easy enough and the safety tips help. Any idea how much the dents in pipe reduce performance?
The link to purchase kit is not working.
@@Pleasant-Peasant-789 just search on eBay you’ll find it. If you have small dents I wouldn’t worry about it, if you have big dents they say it makes a difference
Drill hole screw in bolt mole grips pull out Fill hole spot of weld and if you didn't have welder you could leave the bolt in , that's the cheap version
thats what ill be doing sir
lol @ "that move right there"
Where do you purchase this product and what is it called?
eBay. 2 stroke pipe repair kit
You need more pressure and more heat..
needs to be cherry red/ red hot, work the heat around the dent, then up and down the dent, use the heat to regulate how far the dent comes out..
I would had kept going, the metal needs to be cherry red to be effective.
It’s like my torch isn’t hot enough I couldn’t get the whole dent to glow red only about a little 1/2 inch circle would glow red if I held the torch in one spot but if I tried moving it around s little the red would immediately fade.
That one bump is Factory I think
Yeah think it moulds around the frame man 👍.
Sei limitato uno deve anche distrarsi per me è cosa nuova ti assali occhi 👀 o che poi uno molla giù su si ammacca nn è abituato fa come l u di storia i tuoi amici .
4
Removing dents just doesn't seems worth it to me. Buy a new pipe and a pipe protector going forward. Never gotten a dent since using protectors
It's a pipe lol. You would buy a new hunk of metal to guide air through🙄 seems a little excessive to me considering there are absolutely zero risks to running a repaired pipe. You're a good little consumer aren't you