perfect inside miter joint hack - baseboard molding install
HTML-код
- Опубликовано: 25 авг 2024
- I will show you a hack to get perfect inside miter joint / cut for baseboards, skirting boards and crown molding. This is the easiest way to get fast and easy perfect joints without any gaps. The inside corner of the wall is very rarely exactly 90 degrees and as a result your joints will not line up properly. Through using a flap disk on a grinder we can quickly use a coping technique to get perfect miters every time. LIKE COMMENT and SUBSCRIBE for more videos. #DIY #howto #billshowto
Amazon product links:
Flap disk - amzn.to/3PtZxow
Your donations help me to keep helping you .....
www.paypal.com...
You have no idea how much more comfortable you just made me regarding the inside corners. First time doing baseboards so was a bit nervous. This is awesome! Thank you for the direction.
I was frustrated with this problem since I recovered your VDO, now…I am no more stressed. Thank you so much.
I watched many videos on RUclips on how to do this and no one explained this and demonstrated this as clearly as you do not to mention the use of the angle grinder was pure genius. This video was a life saver for me!
No matter how many times I measure. I will never get that perfect cut. You, my friend, are a genius. Thank you!
Wow, just wow......I don't know whether I should laugh or cry, as I reflect on the last 13 years of my life.
lol ditto
but 30 years
What you mitre all your internals did you? 😂🤣😂
Shit I'd be laughing too. Coping foot on jigsaw and flap disc on grinder is the way to go. In and out off jobs in secs.
Awrsome stuff Bill!
@@samoanSAIYAN Sure did!! Too many times to count or admit 🤦♂️
Me too as I spent ages coving edges with all sorts of angles. Luckily I haven't done the base-boards yet.
Me off to b n q for one of these nice time saver for tomorrow thanks
Just tried this and it worked ridiculously well! Close to perfected after using the flap disc on the angle grinder, and a little sand paper made it a perfect fit.
Inside corners will be very easy going forward! 👍
👍
You, my friend are a genius! I would have ever thought of such a thing until watching this video. Thanks for the amazing bit of information. Enjoy the rest of you day!
I’m glad you enjoyed the video 👍
Bloody brilliant! A flap disc. Duh. I'm sitting here looking at all the cuts I need to make without a miter saw and not really feeling the coping saw and thinking 'can't i use my multi tool or grinder?" and you come along and make my wishes come true.
I'm subscribing, Bill, because you just saved me so much time and trouble.
I use a scroll saw.
BILL THIS VIDEO NEEDS 1million LIKES. Thankyou!!!!!!!
Thank you for the excellant tip. You are boon to the home handyman. I got so frustrated thinking I was crap at cutting a degree joint despite any tool I bought. Awsome, now I don't have to buy my filler in gallon containers.
Wow dude!!
I’ve spent 30min going through useless videos where no one really shows anything useful for a simple DIYer (without specialist saws) and here you pop!!
This has saved me a lot of frustration and anger!!
Genius... Always had a problem with this and coping is just to time consuming. You really have sorted a major problem for me... Thank you
I worked with some amish guys 20 years ago ,and i learned this from them, (coping saw)but i haven't done it in so long,and now I'm back doing handyman work and this will be what I'm doing monday morning,Thanks for the refresher!👍
Best yet ,great finish to .I will be doing a room tomorrow and I know the corners are away off square ,and I wasn't looking forward to it ,but now I am .
This is the best explanation I've seen on RUclips how to do this thank you
Hi, that sanding bit is the key, much easier then coping for sure, im sold thank you 😊
Definitely investing in some sanding/flap discs.... soooooo much quicker and much better profile than coping saw or jiggy..... 1st hack ive ever seen online that I take my hat off to and will deffo use
This is actually brilliant.
Before you started I was thinking yeah scribing it and using a coping saw is the way it's going to be done, the only way it can be done.
What a great surprise.
Thanks for the video 👍🏻
Genius!! For someone who doesn't do it often and for a few cuts.. Thank you!
At first I thought you were simply over complicating it,
But my mind is blown!
It’s very easy and fast to do it this way 👍👍
As an artist, I seriously appreciate your technique.
Mate I am a chippy (Carpenter) and that was bloody awesome... I've been using a jigsaw or coping saw for years. Never actually thought of that... You've made my day! Cheers bud 🙂
You’re very welcome 👍
Love your videos, you get straight to the point no long winded explanations. Love it, I have binge watching your vids lately, thanks for taking the time to upload. Keep them coming.
I’m glad you’re enjoying them 👍
You are the best!!! Such a simplified explanation!!! Thank you for us beginners!!! Wow!!! Still cant believe what I just learned from you in less then,10 minutes!! More valuable then 20 years!!! Haha, your the best!!!
Best video and explanation by far and I have watched TOO many to get this technique down. Thanks.
Bloody awesome Bill. I am doing my baseboards at home now and had this problem. Thank you mate.
best presentation I've seen so far. No muss, no fuss, just usable information. Thanks
Thank you so much. Yours is the clearest, easiest to follow. I can stop eating chocolate and go back to work!
OMG, I couldn't agree more I've been watching for videos for weeks and this video did it!!!!!! I'm going back to work starting today...Basement here I come baby I'm finishing you up!!!!!!
You are Pure LEGEND. I will be doing it first time in my life and yours video is sooo good and I will go with your advice. Thank you Sir sooo much!!!!
That's brilliant. Just so easy when you know how. Thanks Bill.
I'm in the process of painting and refinishing the wood floors. I plan on removing the baseboards before sanding the floors. I'm going to definitely apply this grinder technique.
Nice. I’m just getting into buying tools and DIY so this is a blessing!!!! Thank you for sharing
Same
WOW. That might be really the best way. Trying to cope is hard otherwise.
No I'm a female and have no clue and I wanted to try the base board install myself and I searched YT for many videos just getting me frustrated UNTIL I came across this video and OMG....the I install I did looks better than the guy that did ours years ago. I have NO GAP and the other guys that did ours years ago has major gaps so now I'm going to redo them all thanks to this wonderful gentleman explaining and the outcome is so beautiful. I can barely see any gap! HANDS DOWN THE BEST VIDEO!!!!
fast and perfect made - best method ever!
Best one I’ve seen yet !!!! I’m a DIY and I’m installing chair rail in my man sanctuary and this is the video that have my confidence a boost !! I’m going to purchase a mitre saw tomorrow. I already have an angle grinder Thanks
Dang, this is easier than i expected.
Thanks for the upload!
I've never seen this method before. Well done showing it
I'm impressed. I'm so glad I found this video. I have an entire apartment to do after the old got baseboards got ripped to shreds for new wood flooring. Well done! shout out to ENGLAND. MANCHESTER UNITED! Sorry I got excited about football.
Easiest way I’ve seen this explained. Thank you so fucking much my trim is going to look godly!!!😍😍😍Sincerely all of the contractors and DIYers out there.
You sir have saved me so much time with this. Thank you
I don't have a copping saw so it was great that you used a grinder instead. So much easier! thanks.
So awesome thank you! Another good excuse to buy a new tool! Looking forward to redoing my trim now!
Hahaha this is true! Going to home depot now
I was taught to cope using a coping saw by an old school carpenter, however, have always found this awkward, I will try this method from now on in. Cheers
Thank you, I will be trying this our n my new house renovation.
Excellent hack... Thanks immensely.
Brilliant, saves a lot of Time , I like things done like yesterday
Mind blown!! How come I never knew this. Awesome hack. Thanks.
Great video!!! 100% quality learning! Best part it’s all free. This video is gold. Thanks mate!
👍
You're a legend Bill
what the actual?!! very kewl trick thanks for sharing!!!
What a good tip and nicely explained.
Absolutely brilliant. Really appreciate your knowledge. I know what I’m doing from now on.
I will be trying this soon thank you so much
Thanks to you sir! there was a reason why I bought an angle grinder.
Yes... Makes total sense to me. I am so nervous about installing my baseboards. This I can do. Thanks
This is actually a hack that's useful.
This is going to save me a lot of time! Thanks!
They say timing is everything Bill im just gunna do some trim this weekend and this is a great bit of advice from you (as usual)
Cheers mate👍
Glad I could help, Iv been doing mine for a while now replacing them throughout the house along with doors and windows.
You make it look so easy. I know I would f it up! I'll stick with the coping saw but great video!!
You are a genius...
Grinder is always the answer
You da freakin' MAN!!!
Thanks for sharing!!!!!
you are a very good teacher Bill. Thanks
Great presentation. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.
This is FANTASTIC!!
Great solution
The best idea
Great video, made it look simple.
I'm so glad I clicked on this video! That's so much faster and precise! Thanks
Cheers from Mississippi, USA
👍
Quick and to the point. Not a lot of talking.
Great vid..Big thanks for this one..
Very nice explanation Good camera work I'm going to do it soon in my cabin on chair rail and baseboard thank you for your help
I LOVE IT!!! 🤯🤯
Wow, impressive, and so quick. Thank You
You sir, are a fucking genius. Did my 1st one perfect in mere minutes.
Another tip if using a mitre saw, cut as much excess off before using the flap disc. Even quicker!
You are the Best!
subbed. thanks for the explanation!
I find a 'flapper disc' works great 👍
👍
That's awesome. I'll give it a try next time.
Wow, what an awesome tip. Thanks a million!!
This is amazing!!!
Wonderful job!!!! Thank you!!!
That's the way to do it. Time saving at its best. Thanks........,.
Great tip, thanks
Awesome! Thanks soooo much!!
wow you made it looks so easy !! I love it . thank you
Thank you Bill absolutely useful tip
👍
Beautiful! Your the only video I had to watch! You get straight to the point! No extra fluff and wasting time!
Bill this is a bloody brilliant tip mate! Putting up some dado the weekend this tip will save a lot of time filling! 👍🏼👍🏼
I would only do this for stained trim. For painted trim, simply cut the corners at 46 degrees. This works just fine!
This is exactly what I wanted to see THANK YOU!
Well done for sure
Now that's clever! Thanks for sharing that, awesome 👍
🤯my brain just exploded. I am not sure why I don’t automatically watch RUclips before doing projects. I’m on my last room now and I will try this.
Thats crazy, great job 👍
Excellent tutorial!✨
SUBBED FOR THIS VIDEO ALONE! CHEERS BILL! THIS IS EXCELLENT
Nice I like using a grinder on it.
Best explanation I’ve seen, thank you.