Adam, you can put 280zx front struts in the car for better brakes. You need the lower control arms, ball joints & steering arms from a B310 Sunny (210 in America). You might also be able to find a five lug disc that would fit. Also, the steering box can be tightened by an adjuster on the top of it. Replace the idler arm bushing on the. Passenger side, plus all the tie rod ends. This should tighten up the front end. I circuit raced a 1200 sedan & then a coupe here in Aus, the steering always felt tight, so what you have is worn suspension. Looking forward to seeing what Cleetus can break next, (probably the gearbox).
I vote they don't bother fixing all the exterior stuff, just make it fast. Get some good suspension under it, brakes, tires, and as much boost as the doritos will take on e85 then send it
@@Joebobinator How fast are we talking here? Because if he wants to really crank the thing up, it's gonna need the rotary Starlet treatment to keep it from backflipping.
When you said $500 I was sure it was fished out from somewhere after the last hurricane.. I absolutely didn’t expect you to just turn the key and start it lol
BMW technician here. That F30 is a disposable vehicle. Its the airport rental grade version.... IRS rear end. Turbo 4 banger with the worlds most underrated timing chain. The only part of that car thats worth a damn is the ZF transmission unless its auto start/stop then its a POS as well. The electric steering feels like dog water. The plastic parking brake cable clip breaks and they drag on the driveshaft when you turn. They're 1234yzf instead of R134a so the AC system is expensive to deal with. Beat the shit out of it mercilessly then give it to Whistling Diesel to shred when you hate it.
From the sounds of it, they'll be stripping it down to bare chassis, give it the full drifthq treatment with carbon kevlar panels and all. Who knows, maybe future FD car.
oh yeah because he absolutely cares about this crap from "bmw technician" when he got completely perfect chassis for 500$ and that's all he cares about...
The chassis will be the only part used. Even sounds like it's getting overfenders and doors plus a kit. All of what you said matters if you plan to make a legit daily. But he said 12 times he just cares about the chassis, as in the shell and suspension. It was also only $500. So none of that really matters. Also WhistlinDiesel isn't the only RUclipsr destroying cars, he doesn't do that much currently and I doubt a $500 "rental grade" BMW is worth his time. It's cool that you're a tech and have all this supposed knowledge, I have no idea if any of that was accurate or not, but you picked the wrong time to use it homie.
@@tturi2higher mileage ones that were abused and not maintained might be good for just a chassis. Who knows. Sounds like that's LZs plan anyway. But you can't buy any car for $500 anymore so there's really no loss
It's been a year and a half!?! I've missed this car. I think it is one of the best in your fleet. What a fun, low buck toy. Don't be afraid to put a little into it. I click every Datsun video faster than the rest!
May need to go individual cylinder fuel trim. It being the rear most cylinder it may be getting to much air and not enough fuel. I'd put a fresh set of plugs in and the do a full rip on the dyno and shut it off to inspect the plugs for timing marks and how much fuel youll need to trim/add. Get an amp clamp and a labscope and check the injector firing waveform under boost to verify its actually injecting for the amount of time you're requesting. The current ramp doesn't lie. Same with the ignition coil dwell time and firing line waveform, verify it's actually doing what you're asking it to do. You can also move the injector to a different cylinder and see if the misfire moves. There's ways to figure it out, I'd get a picoscope and step your diag game up. You got this 🤙
Chills ran up my spine when I heard the BMW chime. Thanks for including that in this video, sometimes I miss the E90 but if I ever hear that noise again I may never recover
Im bout to spin LZs block over the Mike disrespect 😂 Love seeing the Datsun back! But its time for a dedicated drag build using a chassis you can actually fit in with a proper cage. The datty is for the streets😂
The Datsun is my favourite car on this channel… i just seem to love it !! The best part of all is that there is so much content and upgrades waiting to be done on it 😱
Im amazed how Adam remains chill and confident when we all cant begin to imagine how much stress he has. Big shout out to Adam for working hard and providing us all this content.
Its fine. It probably does need a harness bar and some harnesses but part of the fun of street cars is not having to dodge a cage getting in and out or bumping your head on them. It's also made a lot stronger and tougher than modern cars, even being "Japanese".
So happy to see the datty back in action, I would suggest looking into nz and aus rotary scenes, kinda keeping the classic look but also with some jdm input, sacked out on small wheels etc look foward to seeing how this car goes
But it does need to keep a bigger, sticky, non-stretched tire on the back and keep the ability to weight transfer properly. He doesn't really need another low street car and this is already pretty close to being setup for a 1/4 mile car. I doubt LZ will ever build a purpose built drag car but some of us want to see that. So there's gotta be an in between where the car looks rad and still puts down good times.
Thank you for providing such fun content for everyone to enjoy. I don’t know shit about working on cars but it’s always a great time when I see you post. Been watching you since you were bmxing at Woodward. Would hate to see this channel go and I hope you keep making videos forever😁👍
the spicy Dorito Datsun is the coolest car in the fleet. it works because it is everything you arent into, it is oposites day whenever you feel the itch
I would love for the Datsun to be a regular consistent content project. Keep on driving it while slowly upgading and fixing/improving the small things.
I dig the black grill (especially if done in a matching satin to the chin spoiler). Seems like a fun car to spend a lot of hours just touching up and dialing in. (Livery Concept - 1970 Challenger T/A 340 vinyl decal set but in RX theme)
A smoke extraction fan on a hose is probably handy for every car shop, just for the health reasens alone. Overhead system on a pulley that just clips on to the exhaust. Maybe even one for every bay.
Been waiting for him to build a dedicated drag car. I think the Datsun needs to stay a mix of street and strip, especially since he wouldn't fit well with a cage. And more Cleet collabs would be rad! I still remember LZ hitting the bald eagle button in Leroy way back in the day and Cleet freaking out because it essentially pinned the gates shut and got all the boost 😂
I just bought the same car. Mine only has 60k miles so it hurts to see it being treated this way 😭😭. Can’t wait to see what he does with it. Also lmk I need some f30 parts.
Such a tough decision to make! The story behind abandoning your rotary-powered Datsun is really intriguing. 🚗🔧 I’m sure it was a hard choice, but I can’t wait to see what’s next for you and your projects. Keep up the great work! 👏 #CarStory #RotaryEngine #ProjectCars
Had a similar misfire problem tuning a friends 2j. Was fine at 25lbs of boost, turning it up more had small miss. Changed grounds, plugs, plug gaps, plug types, coils and settings, checking timing on every cylinder with a timing light and for the light to drop out on full dyno pulls LOL. Ended up putting the ecu power straight to battery with a big relay all fixed. That's in the ecu user manual go figure.
They also kinda age the car and it's fun to change stuff up. It needs to keep a drag pack but maybe there's a set that looks more JDM. Could always swap wheels back and forth
Send that thing to a chassis shop and get that car sorted out. Cage, diff, manual rack, steering column, racing seat harness, chute. Then, do a t56 swap. We obviously love this car, and it needs to be safe.
I want LZ to build a legit drag car but this isn't the one. It won't be quick or fast enough to need a parachute for a long time so it'd just be added weight, especially on the rear, and faking like it's extra quick. Everything else you mentioned takes away from it being a street car that can drag race. None of his street cars have cages, there's a reason for that. They're inconvenient. Also adds weight. A harness bar, 4 points and some buckets are really all it needs and it'll still be a good street car. Also none of that work needs a chassis shop, they could do it there or at driftHQ. Some of y'all are losing sight of what this build is. One day I'm hoping we get the real deal 1/4 mile car, in a chassis that he fits in well enough for a big dawg cage.
I'm heavily in the camp of don't black out the chrome. New cars with fake chrome is bad, but old cars with real chrome I love. It's become a pretty unique look and feel these days imo. I might be biased since I own a 71 240z though
A 6'2 human with a real deal cage in the Datsun doesn't make sense and it wouldn't be a cool street car anymore. It needs harnesses, harness bar and some seats fa sho but besides that Id work on making it hook, getting the shifts down and turning the power up. I want to see a dedicated drag car but it makes more sense to use a normal sized car
Should do a 4 link rear end and a big turbo, rotary starlets/small cars are cleetus’s kryptonite 🤣 don’t think Adam would get to that level with everything else he has going on but would be cool to see a proper drag build
Pretty sure everyone really loves the datsun. If you can fit it in timewise, fixing it up and getting it solid (but probably not perfect) would be awesome. Just be careful not to lose the original feel of it or like, modernize the look/feel too much! I'd say make it safeish/solid/reliable and fix those annoying little things and make it look decent. Also, I've always heard awesome things about the 240z steering racks from TechnoToyTuning, maybe one could be modified slightly to work. Otherwise, I'd assume those have rag joints in the steering linkage that are ultra sloppy (like 240zs), might be able to just replace that with something solid and be in business
the seat breaking with cleetus will forever be the funniest thig with drag racing that i have ever seen XD
Me and my buddy talk about that everytime we see the car 😂
Helllyeah brUUthUR...that shit was hysterical 😂
For real it was not gonna i almost totally forgot about that video lol
@@CitiZen1.0.1 George is the best color commentary man on the planet
And it was a skit totally faked that shit
Adam, you can put 280zx front struts in the car for better brakes. You need the lower control arms, ball joints & steering arms from a B310 Sunny (210 in America). You might also be able to find a five lug disc that would fit. Also, the steering box can be tightened by an adjuster on the top of it. Replace the idler arm bushing on the. Passenger side, plus all the tie rod ends. This should tighten up the front end. I circuit raced a 1200 sedan & then a coupe here in Aus, the steering always felt tight, so what you have is worn suspension. Looking forward to seeing what Cleetus can break next, (probably the gearbox).
bump for adam to see
Bump from another Aussie so Adam sees this yewwwww, straya!
Good shit, Aussies know their shit. I would say Cleetus would either break the gear box or blow the thing up. Grenading engines seems to be his forte.
This
Bump for Adam
The fender mirrors are sick, but I do like the chrome grille over the blacked out one tbh
Bro a bit stole your comment and got more likes :(
You're tripping Adam we love Mike
Drag racing lz is slept on. I’m all in for it, love the Datsun content ✅
I just want more LZ x Cleetus content, they're both great drivers and awesome vibes
Dechrome the Datsun
chrome grill > black grill
also paint that air dam and add strut supports to it
Satin black the center of the OEM grille, and match the air dam and the fender mirrors to that 👌👌👌
This is my favorite build tbh I just love seeing and hearing it, just please make sure you keep it LIGHT
I vote they don't bother fixing all the exterior stuff, just make it fast. Get some good suspension under it, brakes, tires, and as much boost as the doritos will take on e85 then send it
@@Joebobinator How fast are we talking here? Because if he wants to really crank the thing up, it's gonna need the rotary Starlet treatment to keep it from backflipping.
When you said $500 I was sure it was fished out from somewhere after the last hurricane.. I absolutely didn’t expect you to just turn the key and start it lol
BMW technician here. That F30 is a disposable vehicle. Its the airport rental grade version.... IRS rear end. Turbo 4 banger with the worlds most underrated timing chain. The only part of that car thats worth a damn is the ZF transmission unless its auto start/stop then its a POS as well. The electric steering feels like dog water. The plastic parking brake cable clip breaks and they drag on the driveshaft when you turn. They're 1234yzf instead of R134a so the AC system is expensive to deal with. Beat the shit out of it mercilessly then give it to Whistling Diesel to shred when you hate it.
so the f30 is just a chassis for a good engine?
From the sounds of it, they'll be stripping it down to bare chassis, give it the full drifthq treatment with carbon kevlar panels and all. Who knows, maybe future FD car.
oh yeah because he absolutely cares about this crap from "bmw technician" when he got completely perfect chassis for 500$ and that's all he cares about...
The chassis will be the only part used. Even sounds like it's getting overfenders and doors plus a kit. All of what you said matters if you plan to make a legit daily. But he said 12 times he just cares about the chassis, as in the shell and suspension. It was also only $500. So none of that really matters. Also WhistlinDiesel isn't the only RUclipsr destroying cars, he doesn't do that much currently and I doubt a $500 "rental grade" BMW is worth his time. It's cool that you're a tech and have all this supposed knowledge, I have no idea if any of that was accurate or not, but you picked the wrong time to use it homie.
@@tturi2higher mileage ones that were abused and not maintained might be good for just a chassis. Who knows. Sounds like that's LZs plan anyway. But you can't buy any car for $500 anymore so there's really no loss
It's been a year and a half!?! I've missed this car. I think it is one of the best in your fleet. What a fun, low buck toy. Don't be afraid to put a little into it. I click every Datsun video faster than the rest!
I forgot all about Cleeter ending up in the back seat of the Datsun 😂 top 5 moment of the channel for sure
I would love to have a video on a loop of just the rotary asmr to listen to while trying to motivate myself to get work done 😅
May need to go individual cylinder fuel trim. It being the rear most cylinder it may be getting to much air and not enough fuel. I'd put a fresh set of plugs in and the do a full rip on the dyno and shut it off to inspect the plugs for timing marks and how much fuel youll need to trim/add. Get an amp clamp and a labscope and check the injector firing waveform under boost to verify its actually injecting for the amount of time you're requesting. The current ramp doesn't lie. Same with the ignition coil dwell time and firing line waveform, verify it's actually doing what you're asking it to do. You can also move the injector to a different cylinder and see if the misfire moves. There's ways to figure it out, I'd get a picoscope and step your diag game up. You got this 🤙
Chills ran up my spine when I heard the BMW chime. Thanks for including that in this video, sometimes I miss the E90 but if I ever hear that noise again I may never recover
Im bout to spin LZs block over the Mike disrespect 😂 Love seeing the Datsun back! But its time for a dedicated drag build using a chassis you can actually fit in with a proper cage. The datty is for the streets😂
🤣🤣🤣🖤
Drag bug re-activated! Will be sick to see the dato back and the R32 run a 9 second pass
Definitely giving whistlindiesel vibes in the beginning
One of my favorite builds ever
The Datsun is my favourite car on this channel… i just seem to love it !! The best part of all is that there is so much content and upgrades waiting to be done on it 😱
Im amazed how Adam remains chill and confident when we all cant begin to imagine how much stress he has. Big shout out to Adam for working hard and providing us all this content.
This is the best build you have. More rotary content now!!!
Yes! Datsun is back! Extrañe este carro! 🔥🇵🇷
I met you at gtr fest and asked about this car. Not a week later I see a video of it pop up! Hell yeah dude. Love to see this getting back out there.
The Datsun desperately needs a cage, seems like a death trap with that power
Its fine. It probably does need a harness bar and some harnesses but part of the fun of street cars is not having to dodge a cage getting in and out or bumping your head on them. It's also made a lot stronger and tougher than modern cars, even being "Japanese".
@@turbocateyeS475 Haha, no - it is not "stronger and tougher" than modern cars, not even close.
No on the Mirrors! I remember a little silver datsun like your's leaving my 12'second 65 mustang behind, lmao
It's obvious how much work went into this!
Genuinely can’t wait to see Adam in an F30 🥲
Thank god. I love the Datsun one of the most fun builds
for the skyline, check the ignition barrel, that slowly dying causes intermittent misses in other 90s cars
fender mirrors go crazy!! used to have em on my old datsun and loved them
Blanquito PR is back🔥🔥🔥
So happy to see the datty back in action, I would suggest looking into nz and aus rotary scenes, kinda keeping the classic look but also with some jdm input, sacked out on small wheels etc look foward to seeing how this car goes
The other thing they could do is look at what Puerto Rico does with Starlets, and do a _slightly_ less insane version of those.
But it does need to keep a bigger, sticky, non-stretched tire on the back and keep the ability to weight transfer properly. He doesn't really need another low street car and this is already pretty close to being setup for a 1/4 mile car. I doubt LZ will ever build a purpose built drag car but some of us want to see that. So there's gotta be an in between where the car looks rad and still puts down good times.
The braps are absolutely perfect
Thank you for providing such fun content for everyone to enjoy. I don’t know shit about working on cars but it’s always a great time when I see you post. Been watching you since you were bmxing at Woodward. Would hate to see this channel go and I hope you keep making videos forever😁👍
Can't believe you got the f30 for 500, wicked deal. Stoked to see the datsun definitely one of my favourites. Like the grill and lip. So so cool 😎.
the spicy Dorito Datsun is the coolest car in the fleet. it works because it is everything you arent into, it is oposites day whenever you feel the itch
Thank god it back! I asked you for this at New Jersey and I’m so glad it’s back
I would love for the Datsun to be a regular consistent content project. Keep on driving it while slowly upgading and fixing/improving the small things.
The lip with the black grille🔥🔥 Thing rips too! Sick
Datsun content is the best content. I watched even if its only vehicle on channel.
I dig the black grill (especially if done in a matching satin to the chin spoiler). Seems like a fun car to spend a lot of hours just touching up and dialing in.
(Livery Concept - 1970 Challenger T/A 340 vinyl decal set but in RX theme)
Definitely want to see the Datsun more that car is sick!
A smoke extraction fan on a hose is probably handy for every car shop, just for the health reasens alone. Overhead system on a pulley that just clips on to the exhaust. Maybe even one for every bay.
Datsun is one of the coolest cars you have without a doubt!
I pray Adam gets more and more into drag racing, would love to see more collabs with cleetus 🤣🤞
Been waiting for him to build a dedicated drag car. I think the Datsun needs to stay a mix of street and strip, especially since he wouldn't fit well with a cage. And more Cleet collabs would be rad! I still remember LZ hitting the bald eagle button in Leroy way back in the day and Cleet freaking out because it essentially pinned the gates shut and got all the boost 😂
I just bought the same car. Mine only has 60k miles so it hurts to see it being treated this way 😭😭. Can’t wait to see what he does with it. Also lmk I need some f30 parts.
Datsun rotary is my fave car on your channel. I love stupid tiny little overpowered rowdy cars.
Such a tough decision to make! The story behind abandoning your rotary-powered Datsun is really intriguing. 🚗🔧 I’m sure it was a hard choice, but I can’t wait to see what’s next for you and your projects. Keep up the great work! 👏 #CarStory #RotaryEngine #ProjectCars
Love Adam and the crew, from the Isle of Wight uk
also isle of man UK :D
Isle of Wight is also know as isle of woman, secondary to the isle of man 😂
This thing sounds sweet, more videos on the rotary Datsun 🙌🏻
Had a similar misfire problem tuning a friends 2j. Was fine at 25lbs of boost, turning it up more had small miss. Changed grounds, plugs, plug gaps, plug types, coils and settings, checking timing on every cylinder with a timing light and for the light to drop out on full dyno pulls LOL. Ended up putting the ecu power straight to battery with a big relay all fixed. That's in the ecu user manual go figure.
Throwing shots at Mike at the end 😭😭😭
@12:04 that protégé with ontario plates though lol
I ran to the comments as soon as I saw it to ask who's is that 😂
petition to give the Datsun all the love like this
Glad to see it back, love the car
i knew this would be the next video after the sedan on the strip😂😂
No to changing the wheels. The welds are iconic!
They also kinda age the car and it's fun to change stuff up. It needs to keep a drag pack but maybe there's a set that looks more JDM. Could always swap wheels back and forth
Send that thing to a chassis shop and get that car sorted out. Cage, diff, manual rack, steering column, racing seat harness, chute. Then, do a t56 swap. We obviously love this car, and it needs to be safe.
I want LZ to build a legit drag car but this isn't the one. It won't be quick or fast enough to need a parachute for a long time so it'd just be added weight, especially on the rear, and faking like it's extra quick. Everything else you mentioned takes away from it being a street car that can drag race. None of his street cars have cages, there's a reason for that. They're inconvenient. Also adds weight. A harness bar, 4 points and some buckets are really all it needs and it'll still be a good street car. Also none of that work needs a chassis shop, they could do it there or at driftHQ. Some of y'all are losing sight of what this build is. One day I'm hoping we get the real deal 1/4 mile car, in a chassis that he fits in well enough for a big dawg cage.
We have that same setup in pr 🇵🇷 everywhere we love rotary 💪
I say no to the fender mirrors love you brought blanquito back
"I don't knowwwww - new car things" got me 🤣🤣
Saved from being bored again🙏🙏🙏🙏
19:40 shouldn’t have even mentioned the rocket bunny kit, shit would look like a whole different beast with that kit on. Do the roar!
1/8th mile drag strip at the compound!? Private drag racing+ drifting 🤘
Been waiting on more Datsun content!
Need to mansoary glue the datto together lol. Matt Armstrong crew knows what I’m talking about 👍
Need some art on the wall around the LZ logo
yes we love adam x cleetus content can't wait
I'm heavily in the camp of don't black out the chrome. New cars with fake chrome is bad, but old cars with real chrome I love. It's become a pretty unique look and feel these days imo. I might be biased since I own a 71 240z though
More drag racing and also circuit racing like with the white Evo would be so cool. And Adam and Cleetus together are funny as f.
Here for the drag racing.
LFG. Keep killing the game lzmfg and drift HQ crews!
I’d love seeing Adam do a drag build with Cleetus and add a fun drag car to the fleet and race against Collette’s
Please do more with the Datsun it is begging for it too be your dedicated drag car
A 6'2 human with a real deal cage in the Datsun doesn't make sense and it wouldn't be a cool street car anymore. It needs harnesses, harness bar and some seats fa sho but besides that Id work on making it hook, getting the shifts down and turning the power up. I want to see a dedicated drag car but it makes more sense to use a normal sized car
this is my favorite car on the channel
Yes! Please spend a week with Mike to make the Datsun look sick
Should do a 4 link rear end and a big turbo, rotary starlets/small cars are cleetus’s kryptonite 🤣 don’t think Adam would get to that level with everything else he has going on but would be cool to see a proper drag build
By far my favourite car your collection
Black grill looks good with the black lip
I love the style of 1970's lips, the Datsun definitely needs it
Best car on the compound!
Hell yeah brother only mentioned this beast in the last video
Pretty sure everyone really loves the datsun. If you can fit it in timewise, fixing it up and getting it solid (but probably not perfect) would be awesome. Just be careful not to lose the original feel of it or like, modernize the look/feel too much! I'd say make it safeish/solid/reliable and fix those annoying little things and make it look decent. Also, I've always heard awesome things about the 240z steering racks from TechnoToyTuning, maybe one could be modified slightly to work. Otherwise, I'd assume those have rag joints in the steering linkage that are ultra sloppy (like 240zs), might be able to just replace that with something solid and be in business
You gotta love that Datsun makes me laugh every time. 😂
Adam was popping off in this one. Gave me some good laughs
adam with the extremely passive aggressive comment before the intro LOL.
The Datsun is sweet, maybe at least a 5 point cage before more wheelies, it's better than Stinky!
Finally the Datsun is back.
8:21 You said Doody, lol. Sorry, dad joke.
Lmfao I read your comment like right when he was saying it like if it was laggy subtitles lololol
Vintage cars didnt do alot of paint matching. The black stuff fits in just fine with the chrome. That chin spoiler looks just fine black.
$500 for that is a steal, chuck an engine in it and its a great daily for a couple grand
All for the Datsun getting more love!
Datsun merch would be sick
I miss the Datsun content!😫😫
Do a white stripe around the the edge of the front lip like they do on bluebird 1600's in Japan
Put some small tiers on the back of the datto and do a big skid 🤙
Hell yeah, I was about to start an annoying count until we got the Datsun back😂
Hell yeah, I've missed the Datsun!
Video starts at 7:30
130 octane? Holy gaucamoly. I thought 110 leaded in a big bore two stroke i had was wild, but damn 130? That's how you avoid detonation lol.