Looking for a special tool I used or the Xtool X100 Pad 3? X100 PAD 3 + KC501+ KS-1 Set Purchase Link: amzn.to/3uTHwp7 Exclusive 8% Off Promo Code: WWWCODE2 X100 PAD 3 + KC-501 Set Purchase Link: amzn.to/3oLkeR3 Exclusive 8% Off Promo Code: WWWCODE1 X100 PAD 3 Purchase Link: amzn.to/3v2X8qf Exclusive 8% Off Promo Code: WWWCODE3 Lisle 38350 Exhaust Hanger Pliers - amzn.to/3iKY4Lc OTC 6007 Control Arm Prying Tool - amzn.to/3mFQ66T Lisle 39960 Transmission Disconnect - amzn.to/3AuLV2K (can't find exact link, they sell it at Oreilly)
Single use hardware? Great. I thought I was hating on my Ford for how they made the rotors, and how they rust so easily, but now they make disposable hardware? Just how cheap is the crap they make their cars with? Old Ford? Not bad. F150's had really good fuel mileage. New Ford? Ugh. Maybe time to go back to horse and buggies.
There is a huge difference between you as a talented professional who looks at each stage of the repair in an analytical fashion and as a challenge and me the guy who is watching looking at each stage of the process thinking what a pain in the ass. Thankful there are talented people out there like you.
900W , priceless . Reminds me of going into the welding shop as a kid and asking for some "I I09" 1/8" rod . The guy just smiled and handed it to me . Great video .
Wes, I rarely place comments but wanted to let you know that I enjoy your sarcastic, which does include occasional sophomoric quips, and intelligent approach to your craft. Love your work.
Besides your videos being interesting, I think your camera work and photography skills need praise. This video is particular, everything is in sharp focus and very well lighted (except for the key reprogram). From a visual point of view, you are the 'class act' among your peers (that I follow.)
Your close up of pup with your remark ... " for only half the price of a cup of coffee , had me falling out of my chair it was a good thing I was not trying to take a drink. Pup's face was so tuned to the comment and the music I shall remember the scene for a long time. Great gag. 21:27 or about.
Poor Max, he’s as neglected as my mutt who also dislikes rain. 😂🤣😂🔧🧰❤️. Excellent videography today, and the fortuitous appearance of the trash truck honking while passing by was fantastic!
Man it would have been so cool if after the garbage truck honked it all of a sudden burst into flames and slowly rolled out of frame. Knowing Wes he would have just made a funny comment and continued on.😁
Went back and watched your “new shop intro” from 2 years ago. At the end you waxed poetic about approaching 10,000 subscribers and maybe someday hitting 20k. 🤣 I’m happy for your success both on RUclips AND in your shop! You’ve got me as a regular viewer.
Wes: Love the long videos. Keep them coming. You are a very articulate mechanic/technician and even though I don't know much about the auto repair business I enjoy hearing you explain what you are doing . Thanks for WATCH WES WORK !!!!! Best Regards, Pat
That special fuel line tool is required by Ford to keep Diy's out of the repair buisness, and dealerships running in the black. Thanks to guys like you we have options!😊
43:18 I work in a shop and I still have to remind people I work with that even the manufacturer of the battery we carry has a whole website page dedicated to dispelling the battery on the floor myth but they won't wipe down the top of a very dirty battery which is clearly creating contact/resistance between the post.
Great job Wes. You're definitely a very well trained and equiped mechanic. I definitely enjoy watching your vids. Even when you forget a tool where it's not supposed to be.
You often mention your concerns about the road traffic noise, but (given the inverse square law) when doing a piece to camera, your voice comes over perfectly clearly.
Glad to see Max made another video and had a segment with you in it. Very impressed with your use of the graduated cylinder to measure the oil. Brought me right back to 7th grade science class!
So many problems and so few miles. The crap we get these days for huge price tags. Looked like a lot of work to me but you have a big brain and memory. Thank goodness for all your shop toys you have at the shop. Thanks for the video's.
I suspect the customer will be eternally grateful for the fine job you did on their car and the expertise you demonstrated, on and off camera, working on the Edge. I was most surprised to see so little rust given the car is seven years old, unless it came from an area where little salt is used. In my opinion, for whatever it's worth, you have demonstrated you are fully capable of working on almost every mechanical piece of equipment. I envy you. Always fun and educational watching your channel. Thank you.
When you get safety comments, I think of this: I had a car seat when I was little, it was built like a high chair with vinyl cushions and belt, steering wheel with a horn, just hooked over the front seat. I rode on the back shelf of the 65 Wildcat on trips. When dad and I worked on stuff, we washed our hands with burnt (used) motor oil. Then, we rinsed off with gasoline. That gas was orange. It had tetra-ethyl lead in it as a knock preventative. Smelled like death, and cut oil like a hot knife. Ever wash your hair with gas to get transmission fluid out of it?? Yeah, no fun at atll. And safety glasses were those big soft vinyl googles that fell off when you moved, so we never used them. We mixed poisons like chlorodane and malathion in buckets and applied them with a cut down paper oil can. We burned our trash and poured used oil along the fence line to control weed, ants, and also down the slope near the ditch to keep erosion down. When I finished off a donut from the passenger seat of the 74 Ford, I started using seat belts religiously. Not because I was told to, but because it kept me behind the wheel when I was practicing J turns, power slides and donuts. Those safety babies would have exploded shortly after birth in the 60's.....
I was doing brake jobs on the family cars in 1974 at the age of 14. I'd clean all the old brake dust out of the drum brakes with anything I had - paint brushes, wire brushes, blowing on it real hard with my mouth. I swear sometimes afterwards I'd pick asbestos boogers. True story. I'm 61 and mostly OK (nothing asbestos related-just hard miles)
@@woodhonky3890 You know it! We stacked hay under the barn at the neighbor's. I'd blow dirt out of my nose for a week after that job. Remember looking the mirror and seeing a black dust all over your upper lip and nostrils after doing the brakes? First time I used brake clean, I was thinking how cool it was I didn't have to splash gas on everything. The past is a different country. We did everything by old rules there.
My wife is horrified that I occasionally wash my hair with Simple Green to remove oil or other contaminants. Sometimes you have to use the tools that are available to you.
Ford. "Re-use the gaskets, but don't re-use the fasteners." Wes this video is great quality, hot off viewing your most recent upload, just gotta say you've never not been progressing; but you've also just always sought the best you could manage; and it shows. Thanks for all the awesome content you've shared over the years.
Great fix as always. Ford sure do have strange engineering choices in their design parameters. For a company that started off with simple ,tried and tested practices which they hung onto well past their sell by date particularly here in the UK , the new technology seems flawed from the outset. Maybe we as consumers are expecting too much which can't be provided at a cost to make the vehicles bullet proof,but a car with that low mileage I wouldn't expect to have seals blowing! Love your collection of specialist tools and that key programmer looks like a winner. Best wishes from the UK 🇬🇧
I bought a brand new 2013 Fusion when they had the facelift. 2 years later at 30k the transmission started going out and had a misfire. I had done all required maintenance schedules. I told myself 2 things after that. Never a brand new car, and never a brand new Ford.
If I had to describe Ford these days - I would say they use Euro designs and Mexican build and component quality. You buy an Audi and you know its a nice car but you're screwed if it goes wrong because the Germans designed it to be very complicated but it is at least German. Ford seem to design their cars like the Germans but use poor quality parts. I have driven a lot of Ford vehicles for work and I'd be very nervous about owning one - especially with the high mileages I do. It's a shame because the Focus and the Mondeo are nice cars. I lived in a Focus estate 1.5 TDCI for 3 months and did a lot of mileage with it but it was a company vehicle. I know other people who have had massive ££££££ bills from theirs going wrong.
@@zoidberg444 agree entirely, had two Ford Kugas as work cars ,both good spec autos. Both died before 100,000 miles having been fully serviced by main dealers. Previous cars were Nissan xtrails both of which clocked over 179,000 without problem and were working fine when sold on! Wouldn't have another Ford again after this experience!
@@markbowen3638 Yeah - I knew someone who had a DPF failure with his Kuga and it cost him £2800 all told to fix. I would be open to buying a Nissan actually - you know they are not as well made as Honda or Toyota but they are cheap and for what you pay they don't do to badly. My friend has a Qashqai and given its age its not in bad condition.
@@markbowen3638 You must NOT follow the factory service intervals. The extended service intervals are meant to show how inexpensive it is to own. I change the fluids in half the recommended intervals. Dirty fluids can affect seal longevity. Dirty coolant can wear water pumps. Change fluids early and often.
I can’t frikkin believe this! I saw the scan tool and was thinking to myself, “Finally, after two years of not being able to afford a real bidirectional scan tool, I’ve got one on order and it’s supposed to arrive in a few days. I actually have a scan tool so new none of the professional youtubers I watch and learn from even have this one yet! Nyah Nyah!” Then you tell us you got an XTool! Despite the fact that I got another model, thanks a whole lot for bursting my bubble, dude! I got the XTool D7.
Well, you just made OTC a few shekels. I had never seen a tool to pull down on a control arm like that, I paused the video, found it on Amazon, bought it, then happily😀 went back to your video.
@@WatchWesWork Ah, I only read your description of your video which had info on the X100 and nothing else. Next time I will check out your pinned comment as well.
Dude I love this guy! The whole blurring the funnel thing had me rollin! Then I saw the raptor sticker and had me rolling even more. My kind of humor. I work in a shop so I get his humor
Watching your videos is truly a pleasure and an education from a pro. I watched your entire series on your Clark forklift, even though I'll likely never have a need for one. Great stuff. Max is a good observer. Keep up the good work! You're now sharing my YT time with SMA, so that's gotta be good. All the best.
Ok I'm convinced I'll never attempt this one. About the only step I could muster would be putting the dielectric grease on the castle bolt to keep that sucker from grounding out the starter. 😉😜. Loved it as usual Wes.
I noticed when you got it up in the air it didn't have the belly pan on. If it's gone you probably want to replace it. Those PTU's will stay healthy if they don't get hot but you need that belly pan on there for the cooling channel that directs air over it, otherwise they like to overheat and with less than a quart of gear oil in there the oil cooks really fast.
Poor Wes!, he's just having way too much fun with the lube and "funnel" thing, the lovely assistant must really be shirking her duties, lol, great video guys, thanks for sharing.
Nice job on fixing the leaking transmission seal on the newer vehicle ! I was wondering with that being a much newer vehicle and as few miles you said was on it you would think that there was some warranty still left on the vehicle. Anyway , at least you had the specialty tools needed to do the job . Nice job and looking forward to your next video !
@6:23 shows your experience of working on stuff. Most people would have kept fighting at holding the brake caliper out of the way instead of getting a strap.
Looking for a special tool I used or the Xtool X100 Pad 3?
X100 PAD 3 + KC501+ KS-1 Set Purchase Link: amzn.to/3uTHwp7
Exclusive 8% Off Promo Code: WWWCODE2
X100 PAD 3 + KC-501 Set Purchase Link: amzn.to/3oLkeR3
Exclusive 8% Off Promo Code: WWWCODE1
X100 PAD 3 Purchase Link: amzn.to/3v2X8qf
Exclusive 8% Off Promo Code: WWWCODE3
Lisle 38350 Exhaust Hanger Pliers - amzn.to/3iKY4Lc
OTC 6007 Control Arm Prying Tool - amzn.to/3mFQ66T
Lisle 39960 Transmission Disconnect - amzn.to/3AuLV2K (can't find exact link, they sell it at Oreilly)
Single use hardware? Great. I thought I was hating on my Ford for how they made the rotors, and how they rust so easily, but now they make disposable hardware? Just how cheap is the crap they make their cars with? Old Ford? Not bad. F150's had really good fuel mileage. New Ford? Ugh. Maybe time to go back to horse and buggies.
I really like how the exhaust hanger tool works.
Smart putting a tool list on description. Thanks for your work.
What air hammer is that? How do you like it?
Always have issues with ford. Garbage
Comes for the automotive education, stays for the snarky comments and dry wit. Best channel ever
Yep!
Gotta be listening or you'll miss the snarky wit!
I come for the snarky comments. Automotive education is a bonus. 😉
Yep and using that s hook and pry bar was brilliant!
@@graken22 Almost as if it was special tool. Wes has alot of the right ones and knows how to use them.
Any time a transmission install goes easy for me I've glanced over and noticed the converter still sitting on the workbench
That's a bad day!
🤣🤣🤣
Oh god, I didn’t even realize it was possible to do that
😅🤣😂
😂😂😂😂
Dude, that bit with Max asking for donations with the sad music playing.... laughed my azz off. Thanks, I needed that.
Sooooo funny, Max has got the "poor me" look down, hiding well the fact he's spoilt rotten! And he deserves it!
The last guy using air tools on RUclips. Love it. Makes a shop sound like it should.
I'm a hold out.
Careful with that emergency funnel at 37:50! Didn't they tell you that you'd go blind doing that too much?😄
45 minutes of Wes first thing in the morning? Heck yea.
I completely agree
Who says you can get too much of a good thing?
" better buy $600 worth of new bolts......ya.. were definitely going to do that.......".🤓 ... SAME HERE WES! SAME HERE
i caught thats as well lol!
the Max segment was precious ,he was so convincing and lovable !
I guess he was on board after Wes mentioned cheese burger, but looked really sad when he realized it was only half of one. 😂😂
How much a day? Was that a Starbucks coffee or convenience store coffee? LoL 🤣😆
Lets start him a Go Fund Me or put him on Patrion! I'm in.
There is a huge difference between you as a talented professional who looks at each stage of the repair in an analytical fashion and as a challenge and me the guy who is watching looking at each stage of the process thinking what a pain in the ass. Thankful there are talented people out there like you.
Seconded.
More people should appreciate the beauty of watching a professional mechanic at work 🤘
Professional home owner
38:06
@@JohnWatkinsUK Any good mechanic knows everything about "the good ol'e in 'n out"
wish he was here in UK, I'd be in line
I thought he was just a comedian....
Thanks for keeping it family friendly at 37:50, Wes. I spontaneously laughed so hard that the cat flew off my lap, startled, annoyed.
The longer videos are always my favorites... That sticker about pro skills vs normal people skills is cool 😎
yea i agree !
People would rather eat their hand than go to the dealer. That made my day because it's so true. Keep up the good work.
Thank goodness ya can still fix a tail light with a bulb and don’t need to replace a bunch of computers and electronics👍🏻
if this was a year newer, it would be LEDs, and you replace the entire assembly.
Hah Wes I knew as soon as you waved that was the truck you worked on! So cool when people appreciate your hard work!
LOVE the interlude with Max, esp the music. I misted up. Another productive day in Wes' shop! Thanks for letting us watch.
900W , priceless . Reminds me of going into the welding shop as a kid and asking for some "I I09" 1/8" rod . The guy just smiled and handed it to me . Great video .
Funny!
Similar to neighbor saying they had a Pontiac Gooole. I suggested 6000LE. Just helping out a new Canadian. 🇨🇦
900W is that really good Australian brand, right?
Love the humor it never gets old.
Well done on the repairs.
'Twas, 'twasnt it!
it's so nice to see another mechanic that cares about their ears! when I'm not wrenching I'm playing music. I don't know what I'd do if i lost hearing
Wes, I rarely place comments but wanted to let you know that I enjoy your sarcastic, which does include occasional sophomoric quips, and intelligent approach to your craft. Love your work.
Besides your videos being interesting, I think your camera work and photography skills need praise. This video is particular, everything is in sharp focus and very well lighted (except for the key reprogram). From a visual point of view, you are the 'class act' among your peers (that I follow.)
Yeah it's like a Edd China Workshop video, but with greasy and oily hands. ^^
I got the feeling that the capless fuel filler "repair" segment should have been pixelated! Thanks for the video Wes, I found it highly enjoyable.
FYI my favorite part: dog looking sad during short plea for poor animals with sad violin music. Genius
I like watching these kinds of videos because they make me appreciate the simplicity of my '01 2500HD that much more.
As soon as I saw that white truck drive behind you in the opening I got a big grin on my face. I was like, "Well look who it is!"
I can appreciate your sense of humor. I don't think Max did though...
Your close up of pup with your remark ... " for only half the price of a cup of coffee , had me falling out of my chair
it was a good thing I was not trying to take a drink. Pup's face was so tuned to the comment and the music I shall
remember the scene for a long time. Great gag. 21:27 or about.
Poor Max, he’s as neglected as my mutt who also dislikes rain. 😂🤣😂🔧🧰❤️. Excellent videography today, and the fortuitous appearance of the trash truck honking while passing by was fantastic!
I missed the trash truck honking! Must be because Wes gives him so much to haul away!
Thankfully this was posted, I was just about to get off the couch and start being productive for the day
Yep, saved by *WWW!*
Max's scene with the sad music cracked me up. 😆 Nice to see the longer videos as well.
Man it would have been so cool if after the garbage truck honked it all of a sudden burst into flames and slowly rolled out of frame. Knowing Wes he would have just made a funny comment and continued on.😁
🤣
Too funny…see it slowly rolling into the corn field.
😂👌
Haha, I laughed too hard thinking about that happening 🤣 😂
Fear not, it's almost plow truck season! I've hit Costco to stock up on popcorn! No luck on the Kroil flavor....
Went back and watched your “new shop intro” from 2 years ago. At the end you waxed poetic about approaching 10,000 subscribers and maybe someday hitting 20k. 🤣 I’m happy for your success both on RUclips AND in your shop! You’ve got me as a regular viewer.
I admire you’re videos as much as Andrew Camarata’s y’all don’t talk much and explain when needed.
AC has over a million subs..i think Wes deserves a million subs too!! 👍
He will one day I'm sure.
Wes doesn't break stuff using stupid brute force like Andrew Camarata does
Wes: Love the long videos. Keep them coming. You are a very articulate mechanic/technician and even though I don't know much about the auto repair business I enjoy hearing you explain what you are doing . Thanks for WATCH WES WORK !!!!! Best Regards, Pat
You helped me understand the new ignition key set up. Before you, I thought it worked by magic.
7:45 Pliers for exhaust hangers, wow, haven't seen that before! Cool.
They're awesome!
Oh yeah! the best way to start the weekend is with a WWW or SMA video. Thanks Wes!
That special fuel line tool is required by Ford to keep Diy's out of the repair buisness, and dealerships running in the black.
Thanks to guys like you we have options!😊
(21:30) You need Sarah McLachlan's “In The Arms of An Angel” playing during the "Can max haz cheeseburger PSA!"
Having the right tools makes all the difference.
43:18 I work in a shop and I still have to remind people I work with that even the manufacturer of the battery we carry has a whole website page dedicated to dispelling the battery on the floor myth but they won't wipe down the top of a very dirty battery which is clearly creating contact/resistance between the post.
Thanks for blurring at least the initial penetrations of the filler neck molestation tool. My cat is shy...
The best part of my week is seeing that triple W bolt head pop up in my notifications. 😍♥️👑
Thanks again Wes. It's amazing how hard the manufacturers work to complicate the simplest things. Have a great day.
I think the Mechanic skills/People skills sticker should be a shirt. I'd buy that in a heartbeat.
Pure genius....what a delight to observe learn and enjoy a true professional ....
Fell asleep watching the repair and woke up around 38 minutes in, wasn't sure if I was still on you tube or another service I watch.
Great job Wes. You're definitely a very well trained and equiped mechanic.
I definitely enjoy watching your vids.
Even when you forget a tool where it's not supposed to be.
You often mention your concerns about the road traffic noise, but (given the inverse square law) when doing a piece to camera, your voice comes over perfectly clearly.
Glad to see Max made another video and had a segment with you in it. Very impressed with your use of the graduated cylinder to measure the oil. Brought me right back to 7th grade science class!
Look every one! Watch Wes Work is wearing his seat belt. Such a pillar to automotive Safety. Good On Yeah Wes..
I'm glad you are wearing EarPro. Most mechanics dont. Most mechanics go deaf too.
Yep, I'm 62 and I can't even hear bearing noises and such. Wish I had worn ear protection.
@@oneoldmansgarage7880 You could use a dog to help with bearing noises and such.
I’m thankful you blurred out the filler neck scene, preserving my delicate sensibilities 🤣
Great video
I just want to take time to thank you for all you do to make this videos.
So many problems and so few miles. The crap we get these days for huge price tags. Looked like a lot of work to me but you have a big brain and memory. Thank goodness for all your shop toys you have at the shop. Thanks for the video's.
I suspect the customer will be eternally grateful for the fine job you did on their car and the expertise you demonstrated, on and off camera, working on the Edge. I was most surprised to see so little rust given the car is seven years old, unless it came from an area where little salt is used. In my opinion, for whatever it's worth, you have demonstrated you are fully capable of working on almost every mechanical piece of equipment. I envy you.
Always fun and educational watching your channel. Thank you.
All those people that cried about you not wearing a seat belt probably never grew up without using one and hey we survived!!!Nice video as always.
Nice to see the owner of that car still has quite the CD collection. Lol. Great video as always Wes!
“Let’s go violate the fuel filler” was probably better than the clan rally comment from a few videos ago. Keep up the great work!
Love your pointed and accurate disgust of Ford engineering !! Great work and video too.
Work on ANY late Chrysler stuff. 😱 You'll forgive some of the Ford or VW quirks real fast ! 🙄
I didn’t know that exhaust hanger remover tool existed. That would have saved me knuckle skin. So satisfying watch it work
When you get safety comments, I think of this: I had a car seat when I was little, it was built like a high chair with vinyl cushions and belt, steering wheel with a horn, just hooked over the front seat. I rode on the back shelf of the 65 Wildcat on trips. When dad and I worked on stuff, we washed our hands with burnt (used) motor oil. Then, we rinsed off with gasoline. That gas was orange. It had tetra-ethyl lead in it as a knock preventative. Smelled like death, and cut oil like a hot knife. Ever wash your hair with gas to get transmission fluid out of it?? Yeah, no fun at atll. And safety glasses were those big soft vinyl googles that fell off when you moved, so we never used them.
We mixed poisons like chlorodane and malathion in buckets and applied them with a cut down paper oil can. We burned our trash and poured used oil along the fence line to control weed, ants, and also down the slope near the ditch to keep erosion down.
When I finished off a donut from the passenger seat of the 74 Ford, I started using seat belts religiously. Not because I was told to, but because it kept me behind the wheel when I was practicing J turns, power slides and donuts.
Those safety babies would have exploded shortly after birth in the 60's.....
I was doing brake jobs on the family cars in 1974 at the age of 14. I'd clean all the old brake dust out of the drum brakes with anything I had - paint brushes, wire brushes, blowing on it real hard with my mouth. I swear sometimes afterwards I'd pick asbestos boogers. True story. I'm 61 and mostly OK (nothing asbestos related-just hard miles)
@@woodhonky3890 You know it! We stacked hay under the barn at the neighbor's. I'd blow dirt out of my nose for a week after that job. Remember looking the mirror and seeing a black dust all over your upper lip and nostrils after doing the brakes? First time I used brake clean, I was thinking how cool it was I didn't have to splash gas on everything.
The past is a different country. We did everything by old rules there.
My wife is horrified that I occasionally wash my hair with Simple Green to remove oil or other contaminants. Sometimes you have to use the tools that are available to you.
Ford.
"Re-use the gaskets, but don't re-use the fasteners."
Wes this video is great quality, hot off viewing your most recent upload, just gotta say you've never not been progressing; but you've also just always sought the best you could manage; and it shows.
Thanks for all the awesome content you've shared over the years.
Great fix as always. Ford sure do have strange engineering choices in their design parameters. For a company that started off with simple ,tried and tested practices which they hung onto well past their sell by date particularly here in the UK , the new technology seems flawed from the outset. Maybe we as consumers are expecting too much which can't be provided at a cost to make the vehicles bullet proof,but a car with that low mileage I wouldn't expect to have seals blowing! Love your collection of specialist tools and that key programmer looks like a winner. Best wishes from the UK 🇬🇧
I bought a brand new 2013 Fusion when they had the facelift. 2 years later at 30k the transmission started going out and had a misfire. I had done all required maintenance schedules. I told myself 2 things after that. Never a brand new car, and never a brand new Ford.
If I had to describe Ford these days - I would say they use Euro designs and Mexican build and component quality. You buy an Audi and you know its a nice car but you're screwed if it goes wrong because the Germans designed it to be very complicated but it is at least German. Ford seem to design their cars like the Germans but use poor quality parts.
I have driven a lot of Ford vehicles for work and I'd be very nervous about owning one - especially with the high mileages I do. It's a shame because the Focus and the Mondeo are nice cars. I lived in a Focus estate 1.5 TDCI for 3 months and did a lot of mileage with it but it was a company vehicle. I know other people who have had massive ££££££ bills from theirs going wrong.
@@zoidberg444 agree entirely, had two Ford Kugas as work cars ,both good spec autos. Both died before 100,000 miles having been fully serviced by main dealers. Previous cars were Nissan xtrails both of which clocked over 179,000 without problem and were working fine when sold on! Wouldn't have another Ford again after this experience!
@@markbowen3638 Yeah - I knew someone who had a DPF failure with his Kuga and it cost him £2800 all told to fix. I would be open to buying a Nissan actually - you know they are not as well made as Honda or Toyota but they are cheap and for what you pay they don't do to badly. My friend has a Qashqai and given its age its not in bad condition.
@@markbowen3638 You must NOT follow the factory service intervals. The extended service intervals are meant to show how inexpensive it is to own. I change the fluids in half the recommended intervals.
Dirty fluids can affect seal longevity. Dirty coolant can wear water pumps. Change fluids early and often.
I can’t frikkin believe this! I saw the scan tool and was thinking to myself, “Finally, after two years of not being able to afford a real bidirectional scan tool, I’ve got one on order and it’s supposed to arrive in a few days. I actually have a scan tool so new none of the professional youtubers I watch and learn from even have this one yet! Nyah Nyah!” Then you tell us you got an XTool! Despite the fact that I got another model, thanks a whole lot for bursting my bubble, dude! I got the XTool D7.
Thank you for the vid Wes. Great work and thanks for the tip on hitting the record button!
Sometimes I do miss Northern Illinois, but I don't miss the winters!
thanks, I have been thinking I was using Moog when the parts were actually 900W. Never to old to learn something new....
Love how you waved in the beginning
You cracked me up with sad music bit about Max. His face is so emotive and he just looks so SAD when it’s raining!
Can we send him some dry dog food?
I only clicked the "like" button AFTER I knew you put your seatbelt on!!!
Another great video Wes, Max really deserves a whole cheeseburger 🍔. Keep up the great work
then Wes wouldn't get any!
Well, you just made OTC a few shekels. I had never seen a tool to pull down on a control arm like that, I paused the video, found it on Amazon, bought it, then happily😀 went back to your video.
There was a link in the pinned comment.
@@WatchWesWork Ah, I only read your description of your video which had info on the X100 and nothing else. Next time I will check out your pinned comment as well.
I really enjoyed this video because I used to own a nicely loaded 2014 Edge Limited. I sold it at about 20K miles when I bought a 2019 Edge ST.
Dude I love this guy! The whole blurring the funnel thing had me rollin! Then I saw the raptor sticker and had me rolling even more. My kind of humor. I work in a shop so I get his humor
There's Wes patience and skill and the jobs done - love it when a job comes together - great video!!
Damn!! You are one calm dude!! Id never have the patience to do that job!! 600 steps to get to where you need to be!!
Well done Wes A pleasure to watch you work thank you for your entertainment
Really bad attempt at the MOOG-900W humor but I enjoyed the video just the same. I think your lovely assistant saved the day.
Nice complete vid Wes. Thanks for sharing. A job I won’t feel to uncomfortable to tackle.
That's friggin' awesome, using the air hammer to further loosen that axle-nut, rather than grabbing a wrench or socket!!! Well done!!!
Laziness knows no bounds!
@@WatchWesWork Preacher, meet choir...
Watching your videos is truly a pleasure and an education from a pro. I watched your entire series on your Clark forklift, even though I'll likely never have a need for one. Great stuff. Max is a good observer.
Keep up the good work! You're now sharing my YT time with SMA, so that's gotta be good. All the best.
No electrical but a bulb. Good video Wes and I learned something today.
I enjoy your channel. I wish there was a mechanic like you in my area.👍🇨🇦
The scenes with the birds and the corn field was neet @Watch Wes Work
Watching Wes is enjoyable
Ok I'm convinced I'll never attempt this one. About the only step I could muster would be putting the dielectric grease on the castle bolt to keep that sucker from grounding out the starter. 😉😜. Loved it as usual Wes.
I noticed when you got it up in the air it didn't have the belly pan on. If it's gone you probably want to replace it. Those PTU's will stay healthy if they don't get hot but you need that belly pan on there for the cooling channel that directs air over it, otherwise they like to overheat and with less than a quart of gear oil in there the oil cooks really fast.
Really good video, you detailed all the steps without getting to boring. Good job
Poor Wes!, he's just having way too much fun with the lube and "funnel" thing, the lovely assistant must really be shirking her duties, lol, great video guys, thanks for sharing.
My favorite auto channel on the tubes, you’re killing it Wess!
Thumbs up for:
Hitting record button for recording
9000W
Impoverished dog
Hufflepuff standard thread direction workshop.
Adult fuel filler action
Thankfully I have a Hufflepuff watch band on my left wrist to remind me which way is left!
Cool Video Wes. I love your sense of sensibility on the EVAP leak.
Nice job on fixing the leaking transmission seal on the newer vehicle ! I was wondering with that being a much newer vehicle and as few miles you said was on it you would think that there was some warranty still left on the vehicle. Anyway , at least you had the specialty tools needed to do the job . Nice job and looking forward to your next video !
Probably the best clip I've seen from this channel.
@6:23 shows your experience of working on stuff. Most people would have kept fighting at holding the brake caliper out of the way instead of getting a strap.
Wes your so down to earth, Don't lose that sense of humor.
Max and those Sad Eyes that made me laugh out loud too Funny.
Yeah concrete and batteries don’t mix
Enjoyed watching the video
I hope you're joking about the concrete and batteries!
Me too that battery thing is so outdated Rubber case lead acid batteries from the 40s might’ve been a problem not since then
That filler neck action has left me needing a smoke!