Sony xbr-55x850c 6 blinks, disassembly and repair. (Part 2)

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 103

  • @abeg90
    @abeg90 Год назад +1

    Two years later and these two part videos have saved me money. Appreciate your work 🙏

  • @SuburbanJohn
    @SuburbanJohn 3 года назад +6

    Just completed this project using your video! This TV went out almost 5 years to the day when I purchased. This video is Amazing! Thank You!
    Some extra tips for people attempting this:
    -The suction cups made handling the Screen easy.
    -You will Strip screws. I removed 2 corner bracket screws without damage. I used a screw extractor to get the rest out. It took awhile and was frustrating. To place them back, I used pressure from my thumb. Hoping it holds up.
    -I replaced both sides of the LEDs strips as I wanted consistency. If this broke again, I’m not going to take the time to go through all this.
    -I have 2 screws left over and I don’t know where they came from. MARK YOUR SCREWS!
    -The new led strips are slightly off from the center as the originals were (my fault). Doesn’t seem to make a difference in light distribution.
    -Gloves for handling screens at all times
    -I was rough with the screen face down working with the drill. So far it seems that I lost about 6 pixels on the screen. Worth it for the experience in my opinion.
    -have a 2nd table large enough to set the other screens down in the correct order.
    -The white papers behind the LED, not sure exactly what they are for, I ended tearing them into many pieces while removing them (take off before taking off LED’s) I placed them back and as Flat as I could to not block the LED’s.
    Hope you have success if attempting this! I found it to be a fun project.

    • @cathy9791
      @cathy9791 2 года назад

      I'm in the middle of this fun project. It's fun. A few silver small & smaller, screws stripped. Do you have any idea where to get replacements? I can't even find what they are called. Thanks

    • @avverdkmikjifd2433
      @avverdkmikjifd2433 6 месяцев назад

      @@cathy9791late but ace is a helpful place

  • @NoName-dn8nv
    @NoName-dn8nv 3 года назад +8

    Me and my dad had a great time using your video to repair my tv. Works great, we spent some quality time together, and it worked so a win! Thanks man

  • @CBGX
    @CBGX 5 месяцев назад

    Just attempted it... It was perfect, but when putting the LCD panel we didnt align it correctly and it broke. Such a shame. What I try to say with this is, be careful, even at the last steps when you think is done! But can be done. This video documents it very well. Thank you for it!

  • @jamesglesias99
    @jamesglesias99 Год назад

    Hey Big Dogg I had a similar Sony Tv with the same issues and you helped me out a great deal with watching your videos. I took my time and was able to replace my LED bulbs on my Sony tv for 40 bucks. You saved me a bunch of money. Thanks

  • @cathy9791
    @cathy9791 2 года назад +1

    I did fix the LEDs but the screen cracked. I'm glad I tried to save it. Thanks for the video!

  • @linksrepair8078
    @linksrepair8078 4 года назад +2

    THANKS BIG BROTHER FOR SHARING YOUR SKILS AND KNOWLEDGE TO US,PEACE AND LOVE FROM NORWAY.

  • @keithc8828
    @keithc8828 3 года назад

    You are amazing I have the exact same model and it had this exact issue. I ordered the leds from the site you linked in your video. They fit perfectly and fixed the issue!!! You saved me throwing it in the dumpster I owe you big time!!! Keep it up you are the absolute best!!!!

  • @JohnnyWishbone85
    @JohnnyWishbone85 2 года назад +2

    Thanks for doing all this. I'm real nervous to do it because it's so darned involved, but you've helped me prepare as much as possible.
    Also, I respect the hell out of any man who keeps a few O-scopes in his shop.

  • @bartabz2199
    @bartabz2199 2 года назад

    Thank you BigDog, I'm working on my 70 inch and about to see which kind of LEDs this KDL 70W850b has that went bad. I can only find your video and a guy who worked on his 75 in Sony in Australia which took him a long time but he was for the most part successful at his repair.

  • @grave2039
    @grave2039 3 года назад

    I did the bypass to fix mine and one whole side of the tv is now dim. I guess that side had issues and was causing the error after a while. im ordering new strips and going to take the time to tear down and repair. you are the man for uploading this video

    • @bigdog8882
      @bigdog8882  3 года назад

      Appreciate U Boss

    • @grave2039
      @grave2039 3 года назад +1

      @@bigdog8882 you saved my favorite tv from being trashed. thank you!

    • @miguelintheclub
      @miguelintheclub 3 года назад

      @@grave2039 did you replace the backlight yet?

    • @grave2039
      @grave2039 3 года назад

      @@miguelintheclub parts should be In by the end of next week

    • @kingjon5818
      @kingjon5818 3 года назад

      @@grave2039 did you fix it yet?
      I was going to toss it because I see the strips for $70.
      I found on eBay for $27.
      So I'll just repair it instead. I ordered the CX65.
      but it would be nice to have two monitors on my PC

  • @ejcsds
    @ejcsds Год назад

    Just the video I needed while taking a part my 65X850G! Question that I hope you can answer: My 65 indicates that both sides are: ST0650AB9_64LED L & R. When I look for replacements, I am told that ST0650A68 is the same, is this correct if you know?

  • @THANIKATHFGSMani
    @THANIKATHFGSMani 3 года назад

    Good morning sir today I will watch the video is very nice I am also happy your video very useful in my job I am g. Subramanian jayam electronics neyveli 2 tamilnadu

  • @patrickfoster8335
    @patrickfoster8335 Год назад +2

    Ok after this im convinced I can fix my tv.

  • @davidrios9033
    @davidrios9033 2 года назад +1

    Thanks for taking the time to explain this procedure. I have the XBR_55X850D with the exact same problem. I will be attempting this repair soon. Hopefully it is the same procedure as the 850C in the video. Where did you get the new strips from?
    Sorry. Just saw the link in the description. Thanks!

  • @kenpappas9520
    @kenpappas9520 2 года назад

    Discovered a really cool tool to take those strips off. A pizza roller cutter!

  • @FD-ms2nm
    @FD-ms2nm Год назад +1

    Excellent video !!

  • @abeg90
    @abeg90 Год назад

    What screw size do you use for the corner brackets and silver screws holding the long brackets?

  • @Snizzbizzer
    @Snizzbizzer 2 года назад +1

    Hi following this video step by step to carry out this repair myself I’ve come to take the screws out the bezel even bought an electric screw driver for it and some of the screws are requiring so much torque and pressure to remove do you have any tips for stripped screws and what type they are to replace?

    • @bigdog8882
      @bigdog8882  2 года назад +1

      To take the stripped screw out; you can use needle nose pliers or some wire cutters to grab the outside of the screw and turn it.

    • @Snizzbizzer
      @Snizzbizzer 2 года назад

      @@bigdog8882 Thanks for the reply big dog I ended up using a dremel to score across the head of the screw and used a bigger screwdriver I put the TV back together last night and there’s not a single problem with it your video helped a great deal much appreciated man keep up the good work!

  • @guillermoramirez7762
    @guillermoramirez7762 2 года назад

    Thank you for your teaching Big Dog. Hello. My name is William, and I write from Mexico. I have a problem with a sony KDL-55W801A TV. With 6 LED flashes, it has 2 LED bars of 64 each. I adapted 2 bars of 56 leds, but even so, it does not stay on, it turns on and off and sends the same error code 6 flashes. This error can be caused by the driver IC CXA3854M? Please I need your help.

  • @wisher21uk
    @wisher21uk 4 года назад +1

    Hi BD great fix I would of changed both as it will be back again for the other side 😩

  • @justinr2k
    @justinr2k Год назад

    I just did this repair tonight. Everything seemed to go well and the TV comes up without the 6 blinks now, but the right side still goes dim after it powers up. Any ideas?

  • @timrmeyers
    @timrmeyers 2 года назад +1

    Thanks for the great video BigDog! Helped me a lot and fixed my backlight error but not sure if I may have messed something else up during the repair. The TV boots and stays on with no problem but half the screen is darker and solarized. Never had this problem before I did the repair. Replaced both LED strips and they’r both working as far as i can tell (fully illuminated). Any idea what could be happening?

    • @bigdog8882
      @bigdog8882  2 года назад

      Yeah happened to me a few times on this model. The cof tabs on the side of the screen probably got damaged when putting back on those side bars. I just gave up after that, lol.

    • @cathy9791
      @cathy9791 2 года назад

      @@bigdog8882 Say it aint so! You're walking me through every step! Cof tabs? What's that? I'm in the middle of this fun fix. I have stripped screws. Who sells the tiny silver screws?? Im determined!

  • @TheRealMikeHalstead
    @TheRealMikeHalstead 3 года назад

    Thank you! I really appreciate you providing this info!

  • @mensuper5837
    @mensuper5837 2 года назад

    Hi. I have in the same TV the lower part of the right side is not highlighted. where can i buy this led strip to replace it? thank you

  • @hookedup9424
    @hookedup9424 10 месяцев назад

    I replaced LEDs in my Sony Bravia 65 inch but now the top half is really dim. Any ideas

  • @adrianodossantos3284
    @adrianodossantos3284 3 года назад

    Boa tarde
    Tenho uma xbr-65x855d que fica piscando o led verde e o laranja intercalando, depois ascende o led branco, parece que a tv esta ligada mas não ascende o backligth e nem aparece imagem nenhuma de fundo.
    Eu vi em um forum que pode ter perdido a sincronismo de placa e painel.
    Ja viu isso?

  • @svenh8423
    @svenh8423 3 года назад +1

    hello .. are the sharp led strips the better ..? or the original sony ..?

  • @BobKubinski
    @BobKubinski 10 месяцев назад

    I need to get a screen for this tv. Do you know where to get one?

  • @Jamus1975
    @Jamus1975 3 года назад

    I have this tv and I don't have any flashing lights but my TV is very dim now and almost a blueish tint. Is this my problem as well ?

  • @izzycontreras4357
    @izzycontreras4357 3 года назад

    What up brother i see you have the bears shirt i am in chicago and have this tv xrb-65x850D
    Today i got the 6 red blinking lights and i was able to reset and made it to set up screen were i notice 1/4 of the screen was dark. If you are in Chicago will you be able to repair it?

  • @956mendez86
    @956mendez86 3 года назад

    I have a kdl-70w850b i change power mainboard inverter and tcon and no backligth i see the image on screen.....i took out screen to see leds have problem i tested with led tester and evrything works good any ideas.....

  • @joshuajordan0221
    @joshuajordan0221 4 месяца назад

    How much do you normally charge for a job like this?

  • @markmathis336
    @markmathis336 3 года назад

    Thanks, Im gonna attempt. Why didnt the lights go out originally at the 15:19 mark?

  • @ANDREWS7523
    @ANDREWS7523 4 года назад +1

    Good work but as mentioned, i always change both backlight sets so it doesnt come back. Also there looks to be some colour differences as ones new and ones old

    • @ayman3590
      @ayman3590 3 года назад

      Do y have an idea on where we can get the LED set from in the USA please, i do have the same problem on XBR55X810c

    • @marcusdamberger
      @marcusdamberger 3 года назад

      Right, it's always best to replace all the LED's as a unit. I just replaced all the LED's in a Sony KD-70X690E. Before I removed them, I turned on the TV just to see how bad it was. About half the LED's were turning blue. Only two half strips were entirely good. I took them all out since I had all brand new matching LED's for all the rows. Plus they will all age together from new. If they don't turn blue before then..

  • @sgtfluffy7466
    @sgtfluffy7466 2 года назад

    I have the same TV. but i can't even get it to turn on anymore. Do you happen to know what i need to do to fix? if you have a phone or email i can contact you that way

  • @miguelintheclub
    @miguelintheclub 3 года назад +2

    Thanks for posting this video man. I just got this issue while playing a video game where the tv turned off and gave me six blinking lights. Where can I get these parts and will they be genuine ? When turning my television on the right side is dim and the left side is normal than it turns off with the six blinking lights. Is this a led issue or power supply? I am new to this and would like for you to educate me.

    • @bigdog8882
      @bigdog8882  3 года назад +2

      Led issue, most likely.

    • @vbnautical5041
      @vbnautical5041 3 года назад

      Same exact issue here on XBR-65X850D. Very annoying to see so many people online with same issue. Question is, are my eyes good enough to appreciate sonys quality picture or do I spend a few hundred bucks on a cheap brand like Hisense

  • @quebeharry7067
    @quebeharry7067 22 дня назад

    If I took this to a repair shop roughly how much would they charge me to do this work

  • @delldi1
    @delldi1 4 года назад

    Thank you, how much are these LED stips and do you have a part #

  • @Spyfromspace
    @Spyfromspace 3 года назад

    How much u charge to fix my 6 binking lights?

  • @deanmemsmultimedia7907
    @deanmemsmultimedia7907 3 года назад

    Hello bro , have you got a motherboard for this TV. ?

  • @randomchannel4me
    @randomchannel4me 4 года назад

    Would you happen to know what type of screws and if they’re a specific metal for the black and silver ones that are super easy to strip? Ended up stripping a couple of these trying to get them off and would like to replace them if I can...

    • @tjlloyd1895
      @tjlloyd1895 3 года назад

      Alec, how did you get the stripped screws out? I have stripped one on the top bezel and T-Con board. No idea how to get them out with out stripping them further. Anyone have any ideas?

  • @juanjosegomez5684
    @juanjosegomez5684 3 года назад

    Donde compró las tiras led

  • @marcozavattamz
    @marcozavattamz 2 года назад

    if my kd-55x8508c make 6 red flashes after couples of hours .and I unplug the power after 10 minutes it's start normally until the red flashes ...... have I ti do this proces? and substitute the LEDs Stripes???? thanks to every body want to help me ...

  • @LEEALANIS77
    @LEEALANIS77 3 года назад

    Have you ever dealt with a sony tv with 5 blinks? I grounded the bl_err and nothing. It clicks on than off

  • @domisoftsa
    @domisoftsa Год назад

    At minute 12:00 it can be seen that you use very strong suction cups and you can damage the screen. I use 4 smaller suction cups and have never had a problem.

  • @MotorCityEastSide
    @MotorCityEastSide 3 года назад

    how much would you charge to make this repair? thanks

  • @veeramanikant432
    @veeramanikant432 3 года назад

    Hai sir..
    I'm using sony 43 inch tv last 2years.
    Now getting 5 times blinking red led,
    Display is showing white color.

  • @markborrmannjr
    @markborrmannjr 3 года назад

    So did your note in the video mean the lcd panel and light diffusers all come off in 1 piece? I pull the frame off on the 4 sides of screen and just lift it all off to access the led light strips? Either way I will get this done but I would really like to know what I'm getting into...

    • @bigdog8882
      @bigdog8882  3 года назад

      No, lift the screen out separately, then take the difusser screen and brackets off together.

    • @markborrmannjr
      @markborrmannjr 3 года назад

      @@bigdog8882 ok.. thanks... I appreciate the help.. I think the left side of these sony tvs have an issue. Its always the left strip and I know when watching the tv the past 5 years the bottom middle of the screen would always get bright as hell for a few seconds and go back to normal. It was like 1 led on the strip was getting over voltaged for a few seconds every now and then, and now the left side is the one with the issue.. I haven't looked at these parts yet but is it possible for just 1 of the led light on the strip to go insanely bright for a few seconds?

    • @kingjon5818
      @kingjon5818 3 года назад

      @@markborrmannjr mine is the right side.

  • @jesusrivas6706
    @jesusrivas6706 2 года назад

    Where do you order the leds

  • @vernonbosshard9317
    @vernonbosshard9317 3 года назад

    I have a Sony Bravia 48" kdl-48r510c, when it starts the Sony logo appears as normal, then you can see a faint flash in the screen and the Sony logo turns green and pixel by pixel disappears, then all I see is a black screen. It has one board, power is a 19 volt power supply much like a laptop.

  • @23DoBoi
    @23DoBoi 2 года назад

    In the process right now less installed they turned on disconnected to place white screen back on went to check if it had smudges and now leds won’t turn on. Tv turns on blinked green and orange and then I fixed that. But now new leds won’t turn on. Any help?

    • @23DoBoi
      @23DoBoi 2 года назад

      Sorry I meant to say “I am in the process of fixing the leds now” the new leds are installed, they turned on. When I went to the next step, the leds will not turn on and blinks amber and green.

  • @brendagomez1017
    @brendagomez1017 2 года назад

    How much does a work like this cost?

  • @ANDREWS7523
    @ANDREWS7523 4 года назад +1

    Do you purchase your Backlights from shop jimmy

    • @bigdog8882
      @bigdog8882  4 года назад

      Affirmative!

    • @DRAGAOoBR
      @DRAGAOoBR 3 года назад

      @@bigdog8882 my tv is this sony of the video XBR-55X850C that in Brazil this XBR-55X855C is flashing 6 times the led or the internal source is bad? she calls after erasing an american friend can you help me?

  • @Ericec4126
    @Ericec4126 3 года назад

    I just cracked my screen trying this, would you like any of these parts?. I live 20 minutes from Chicago

    • @bigdog8882
      @bigdog8882  3 года назад

      Thanks, but I still got a cracked one I have yet to strip lol. Thanks again.

  • @taylorprice-ellis2239
    @taylorprice-ellis2239 3 года назад +1

    Where are you located? I would love to bring my tv in for you to fix it!!

  • @vossenspringer
    @vossenspringer 3 года назад

    So these LED strips are only on 1 side of the screen but still manage to illuminate the whole screen? 🤔

    • @bigdog8882
      @bigdog8882  3 года назад +1

      Yes, The Diffuser screen(s) that lay right in front of the led strips is what spreads the light evenly across the whole screen.

  • @tyronenelson9124
    @tyronenelson9124 3 года назад

    Here's a hint, turn the backlight down, the contrast and brightness a little in the menu on the tv then the tv will last alot longer.

  • @peshmadscientist1833
    @peshmadscientist1833 2 года назад

    There outta be a law that the leds should be easily accessible. A very risky operation. Why can't they be removed from the back, or pulled out from the sides like a dipstick?

  • @vibes1952
    @vibes1952 4 года назад

    Hello, this is a going to be a divergent comment, but I've been trying get in contact with mr bigdog8882 and ask a tech question
    About sony XBR75X900F .
    I was looking for an email or link but also found this comment link and got me here. SO,
    My name is Neil or thegratefuldad your videos are so step by step I like them.
    I really could use some help and I'm hoping you might have an answer.
    I wasnt sure of your real name so bigdog or bd ok?
    I have sony
    Xbr75x900f
    Exact error as your video with 65x900C
    After power on, the colored android letters start spinning a few secs and then, click display goes off, then 4 blink red leds!!!!
    I thought I should be able to ground BL_ERR wire like most everyone else is doing..
    HOWEVER
    silk screen on board shows
    Bl_err pin 1. not pin2.
    Also the connector has 2 rows of pins not 1 like on yours
    Is there any war you can verify which pin actually is bl_err ? I'm going to send this msg and hopefully I can figure out if I can take a photo to send. Btw, if you dont know, ok,it's ok,
    So frustrating for this old guy. getting ready to toss it, but. I thought this would go the same as yours.
    Ok b back in a bit.
    Thx in advance
    Neil thegratefuldad1@verizon.net

    • @bigdog8882
      @bigdog8882  4 года назад

      Thanks appreciate U. Looks like its probably bad BL strips. All I can tell U is that you'll probably have to replace them yourself. If not, maybe you can find a shop or tech in your area. Just order them from here. www.shopjimmy.com/sony-lb75018-led-backlight-strips-24-xbr-75x900f-new/

  • @marcusdamberger
    @marcusdamberger 3 года назад +1

    Thank you so much for posting this, I was trying to figure out how to best deal with the LCD panel on top. Glass suction cups! Also removing the diffuser as one unit being a better alternative, good advice. Are you fixing these TV's in your basement? I see some stairs in the back corner; do you have to carry these big TV's down that flight of steps? ;) Thank goodness they are not CRT's anymore! ;)

    • @bigdog8882
      @bigdog8882  3 года назад +1

      Yeah I do, but its a straight shot down stairs, lol.

    • @bjcampb
      @bjcampb 3 года назад

      @@bigdog8882 Hey I have the same problem with the 6 blinking lights on my Sony Bravia 70" and I'm on the south west side of Chicago Beverly area and on one of your other videos I saw the day in the life of a real TV repairman and was wondering if you would be able to fix it. My email is bjcampb@gmail.com

  • @vivektirpude89
    @vivektirpude89 2 года назад

    Sir I need pair of leds for my KD-49x8500c.. can you help me.. I'm from India. Please contact me I can purchase it from you

  • @tcat5933
    @tcat5933 3 года назад

    Big Dog, love the video. I have an XBR-55X930E with (4) flashing red lights. Any thoughts? Tks. T

    • @melissaoday7675
      @melissaoday7675 3 года назад

      My Sony is doing the same thing and I replaced the Main Board, Tcon board and power supply board. Any ideas? Is the LED lights the only thing left now?

  • @hammiranda
    @hammiranda 4 года назад

    I always use gloves when removing the diffusel as not to get finger prints on it.

  • @edwardanthony7283
    @edwardanthony7283 4 года назад +1

    Different bulbs. Like a mouse getting stuck in the snoot of an elephant..

  • @MrPimpJuiice
    @MrPimpJuiice 3 года назад

    They wanted half the price of a new tv for fixing it... gonna do it myslef i guess

  • @agstrader1850
    @agstrader1850 3 года назад

    Sony kdl55w850a

  • @DavidA-411
    @DavidA-411 4 года назад +1

    Lot a work for that

  • @accurateapplianceelectroni9703
    @accurateapplianceelectroni9703 3 года назад

    How Not To Repair a TV. DO NOT DO THIS !

  • @riadzaza8504
    @riadzaza8504 3 года назад +1

    Hello mate I did change the backlight on my Sony but after start won’t turn on and blinking green and amber or orange light any help pls

    • @melissaoday7675
      @melissaoday7675 3 года назад

      Needs a software update. Go to Sony online and it will tell you how to download to a USB and install.