This is whimsical and fun as well as being a good exercise in problem solving to make an animated model. You never fail to amaze, Boylei! Thanks for sharing this ! 360th Like.
I appreciate your tribute build. If anyone hasn't seen the original video on Cody's channel I highly recommend it, it's mind boggling, hilarious, and scary all at the same time. Good job Boylei !😅
A swing set that doubles as a gallows? A seesaw that cuts "things?" in half or pounds them into a flat oily disk? The slide will send the innocent rider into the large mouth of a large mouth bass, who's been patiently waiting, all day or all week, depending on the weather! Perhaps the monkey bars would be a better gallows? Maybe, maybe not😂... just a thought ❤
What a creative piece! And im actually suprised at how fast it went at the end. Using motors like this in dioramas would be awesome to see from you again! Maybe in a Wild Imaginary West wind-powered machine!
First time seeing your channel. Really enjoyed your blend of speed/ project progression and details shown. It’s a difficult balance and you do it well:)
Spinning uncontrollably on a merry go round was literally my childhood nightmare….so I am wondering why this video was still so fun to watch. What a great build! Thanks Boylei.
This is so awesome! I think it would be cool for you to do other viral moments by big youtubers going forward! I'm thinking Cleetus Mcfarland in his ripsaw, or jet boat or something lol
I didn't have a low key Whistlin' Diesel Boylei Hobby colab on my bingo card for July but here we are. I'd love to see your skills on a Roadkill build!
This us awesome! The 1977 version of this is six friends spinning it up as fast as humanly possible. If you stayed on, you were the playground equivalent to King Arthur.
I was just thinking....remember when YT recommended that "made a underground house" video and you made one, wondered what the next one of those "i saw another channel and made it" video would be? And here we have it!
The ground around the edges of merry-go-rounds was always grassless and often even worn down to the point that there would be puddles of water after a rain. The controller should have been in the middle because of centrifugal force. Yes, when I was young somebody would lay a motor bike on its side with the rear tire on the merry-go-round edge and 1) see how long we could stay on, 2) how fast could we get it going? Yes, somebody flying off and onto the bike was hilarious. We also did tough guy contests and held onto the horizontal bars with just our hands. At some point you would be straight out like a horizontal pull up, but not for long. The fun part was hoping the handle bar on the bike did not shift, that was also funny. It hurt, but was funny. The best we did was with Mikes Kawasaki 125. Mike held the throttle and managed to shift into 2nd gear somehow, while me and Jim held the rear tire to the merry-go-round. Somewhere during this both Jim and I realized that holding a motorcycle rear end with our hands about an inch from spokes and drive chains going real fast was real dumb. But man were we cool for about a month. After that the center Merry-go-round bearing was never the same.
One of the main reasons we love your videos is that you’re a really talented and skilled person who is not an attention whore like the inspiration for your diorama.
That was one WILD build! And I am sure the ride was as well! I got sick just watching the mini! Whoa! That guy needs a hobby! Something a little more "stable!" HA Great build as always Sir! Thank You for sharing! This was a most unusual one to date. Looking forward to the next one. Take Care, Be Safe, God Bless, Later
The collaboration we never saw coming
Boylein deasle
@@sueellis4768 di e sel
Fr
Exactly literally both of my favorite RUclipsrs 😂
@@sueellis4768NOOOOoO
as soon as i saw the thumbnail i knew it was WhistlinDiesel, it would be interesting if you could do more car related projects. Love your videos
100%
Same
Barely woke up, opened my phone, got the notification, and now I’ve never been happier to be awake
Same here
Me toooo
OMFG Same!
Me too, bro
Sameeeee
You gotta send it to him! It's nice to see a fun build a bit different than what you mostly do (which is awesome anyway). Love it!
The model is made of styrene, paper and plastic. It wouldn’t survive 20 minutes in Cody’s presence lol
“This diorama means nothing to me” probably Cody.
I agree with all three of the previous comments.
I don’t agree with any of the previous comments accept for the 4th one
"what is this, a jet powered merry-go-round for ants?" - Cody probably
Wow! I hope Cody sees this!
He sent it to him!! Was just in a video on Cody's second channel!
Such a random choice, but well deserving of a whole video
Whistlin' Diesel should recereate one of you creations in 1:1!
I saw my notification and came as soon as I could 🫡
Ok
It was a great video!
Here from WD’s channel. I can’t believe I’ve never found this channel; what a gem!
first person here from WD's video :D
I'm a new subscriber today, just saw this arrive on W.D.1000's channel. ❤
That build is crazy insane both the real deal and your model. Well done.
Brown 4.0 got a sensible chuckle out of me. 😄 Great video as always!
Really love these little detours into different subjects and genres; really helps keep the channel feeling fresh. +1 engagement 👍
I love the link to the actual video at the end, thats awesome
This is whimsical and fun as well as being a good exercise in problem solving to make an animated model. You never fail to amaze, Boylei! Thanks for sharing this !
360th Like.
Great video!!
Keep it up my man. I hope Cody see's this
Now that was a wild diorama not expecting that
I appreciate your tribute build. If anyone hasn't seen the original video on Cody's channel I highly recommend it, it's mind boggling, hilarious, and scary all at the same time. Good job Boylei !😅
Saw this on Cody's second channel this morning and came to check out how it was made, great job!
This is awesome. Next time can you do a "lost tapes" diorama of the Oklahoma Octopus? Or maybe a bigger merrygoround!🔥
A swing set that doubles as a gallows? A seesaw that cuts "things?" in half or pounds them into a flat oily disk? The slide will send the innocent rider into the large mouth of a large mouth bass, who's been patiently waiting, all day or all week, depending on the weather! Perhaps the monkey bars would be a better gallows? Maybe, maybe not😂... just a thought ❤
What a creative piece! And im actually suprised at how fast it went at the end. Using motors like this in dioramas would be awesome to see from you again! Maybe in a Wild Imaginary West wind-powered machine!
Dude, the quality of your work, looks more and more professional every video. You are killin it, keep going :D
I actually watch that RUclipsr quite a bit. He's crazy, but you have to admit he is entertaining.
No better thing to watch on a sunday
Euros final?
Or are u American
@@Calamitious , Nah British but this channel is awesome .
@@jasonshiers5771 yep a great channel, who I have been following for a long time but I feel I wouldn’t take this video over the final 😅
Yessir
This is genius …. Never heard of the Cody
Guy but this is really great ❤
Brown 4.0 made me lol 🤣
Unexpectedly here super early.
Awesome job and I love that you even added some randomness to the flame by using a ball of filament wire.
Almost midnight, always there for the Boylei drops, w video
LOVE IT!
and no spontaneous disassembly!!!
Bros voice sounds so good! I swear I thought I was listening to an audio book!
First time seeing your channel. Really enjoyed your blend of speed/ project progression and details shown. It’s a difficult balance and you do it well:)
your engineering skills are on par with your creativity.
Fr the colab I didnt know I needed. Love both channels, been a fan of both for a while. Great video
I love your content Boylei Hobby Time👍
Now THIS is an epic tribute build. Right on!
Love watching, ever since I found the channel I’ve been addicted
Spinning uncontrollably on a merry go round was literally my childhood nightmare….so I am wondering why this video was still so fun to watch. What a great build! Thanks Boylei.
That may be the best thing I ever saw.😮
This is so awesome! I think it would be cool for you to do other viral moments by big youtubers going forward! I'm thinking Cleetus Mcfarland in his ripsaw, or jet boat or something lol
I can't watch the video at the moment, but I have to say right now, I really feel this one!!
Always an Outstanding Build, Video and Presentation.
I didn't have a low key Whistlin' Diesel Boylei Hobby colab on my bingo card for July but here we are. I'd love to see your skills on a Roadkill build!
I love your videos and you have inspired me so much. I cannot thank you enough for everything. (Also make another train model those are my favorite!)😊
This us awesome! The 1977 version of this is six friends spinning it up as fast as humanly possible. If you stayed on, you were the playground equivalent to King Arthur.
Not what I was expecting but this was really cool
Just awesome!
This is one of my favorites. Great work.
That was a trippy build, really fun 😊. 👍👍👍
Dabs + coffee + Boylei Hobby Time = Proper Sunday Morning
hmm almost getting some bobby fingers vibes from this but tbf nobody can beat his crazy dedication to the bit xD
You never cease to amaze. Awesome build!!!
Literally both of my favorite RUclipsrs I’m so happy 😂
Im sorry
Best. Playground. Equipment. Ever.
Loved it! Thanks boylei.:)
Yo I’ve been watching your videos since the amethyst cave video, you’re awesome man keep it up😉
This was cool as hell
Another amazing build Boylei. Keep up the amazing work. ^_^
Brilliant! Absolutely brilliant!
I was just thinking....remember when YT recommended that "made a underground house" video and you made one, wondered what the next one of those "i saw another channel and made it" video would be? And here we have it!
We all know who needs to see this
Art imitates life
This is the crossover episode I have been dreaming of
The crossover we never imagined
Nice! LOL
Something real and yet outrageous.
Well as they say, it do go fast. Lol great job thanks for sharing.
great source for your inspiration )
I love the work this dude does
Just when you thought it was safe to go to the playground again. Great build.
I’m gonna put it out there. This this is cool
Fantastic build!
Such a fun build!!! Love it 😂❤
That was super cool man good job.
Great video
Incredible work👍👍
......But then sometimes.... the internet is just EXCELLENT!
@whistlindiesel yeah. From fantastic and geams to real life
first time here and just saying hi, you got mad skills.
If you used a compass/dividers, you too could make perfect circles that divided into six equal pieces
if only wistlin diesel saw this video
LETS GOOOO. UNKNOWN COLLAB???
I would love to see a collab with North of the Boarder
I know this seems out of the blue, but can you make a diorama of a deep sea oil rig with a sea monster? That would be awesome
What a heck of a collab
It’s not a Collab
Now can u make a diorama of the killdozer
HELL YEAH
Boylei in the morning, House of the Dragon in the evening. Sundays are great
It is weird I've now seen this first without having watched cody's video?
whistlinDiesel would be proud
The ground around the edges of merry-go-rounds was always grassless and often even worn down to the point that there would be puddles of water after a rain. The controller should have been in the middle because of centrifugal force. Yes, when I was young somebody would lay a motor bike on its side with the rear tire on the merry-go-round edge and 1) see how long we could stay on, 2) how fast could we get it going? Yes, somebody flying off and onto the bike was hilarious. We also did tough guy contests and held onto the horizontal bars with just our hands. At some point you would be straight out like a horizontal pull up, but not for long. The fun part was hoping the handle bar on the bike did not shift, that was also funny. It hurt, but was funny. The best we did was with Mikes Kawasaki 125. Mike held the throttle and managed to shift into 2nd gear somehow, while me and Jim held the rear tire to the merry-go-round. Somewhere during this both Jim and I realized that holding a motorcycle rear end with our hands about an inch from spokes and drive chains going real fast was real dumb. But man were we cool for about a month. After that the center Merry-go-round bearing was never the same.
I just love how bizar a concept of a model this is. Inspiration comes from weird places😂
One of the main reasons we love your videos is that you’re a really talented and skilled person who is not an attention whore like the inspiration for your diorama.
That was one WILD build! And I am sure the ride was as well! I got sick just watching the mini! Whoa! That guy needs a hobby! Something a little more "stable!" HA Great build as always Sir! Thank You for sharing! This was a most unusual one to date. Looking forward to the next one. Take Care, Be Safe, God Bless, Later
That's some quick work. I just saw that video the other day
your voice is so calming i fell asleep lol
Such a sick video!
Might as well sub and watch a bunch of your vidoes. Stoked and super cool project!
Cool
I watched that video too. I’d go for a spin if given the opportunity. Cool diorama 😎👍🏽
Mah boi whistlindiesel !