Dropping Chevy With A 2/4 Drop On 24s
HTML-код
- Опубликовано: 8 сен 2024
- Clapped Nation Meaning: A project car/truck that came from daily traffic to something you can call a build. Stay Humble
Instagram: ...
TikTok:www.tiktok.com...
Flip KIt
amzn.to/3XfFiOL
Lift Shackle
amzn.to/3NhFGrL
Drop Spindle
amzn.to/3PmG4aS
Drop Shocks
amzn.to/3PfY9HL
Warning: Work at your own risk, this is the way I did it and what worked for me. Not saying it’s the wrong or right way.
Came out clean my boi. Keep up the good work. Saludos de murda Worth😏
Appreciate it!
📒
Without the lift hangers installed your sitting at a 6 on the back with the lift shackle, 2/6 drop
Ok so question. I see on the front you did the spring and 2 inch drop spindle..... But on the rear you didn't use a kit. You just located the spring and used shorter shackles is that correct??? Basically free way to lower the rear. I like the stance!!! If you confirm this I'm definitely doing it your way
You did it ?
Looks good I have 2011 silverado 26" x10 ❄ replicas about to order that 2/4 lowering kit ...does your wheels scrub im running 275/30r26
Nothing in the front just the inside of the bed
I just bought a 2007 extended cab Silverado and I want to add more power to burnout like you did in the intro what would I need if my truck is stock
I recommend doing a tune up it made mine feel stronger cuz mine where burnt already and i didnt even know😭
I got 5.3 08 can I tune it without adding upgrades?
What size tire on your 24s, 33inch?
Rims are 24s on 295s and doesn’t rub
Where did you get those brake rotors do they help brake better?
So you kept the stock shackles in?
No I put lift shackle, they are the small ones.
@@ClappedNationmartiguador frontal lo pusiste por de bajo o por arriba
Send me the link for that kit I have a Chevy just like that I want to drop it the same
Did you end up fixing the toe issue on the front and did you have to adjust anything on the pinion angle??
Just fixed the toe camber was good
Does take out the helper spring do any bad to the truck ?
Helps it support more weight so if you remove it, when adding weight to the bed of the truck, it will sag easier
That shit look dope af