Considering the use of 9" grinders at other shops, I'd've expected them to use one here between beads. Must be quicker and not much more expensive than spending time trying to chip and scrape out all the slag.
Yikes! That welding is atrocious! Just burn that rod in there man. Just starts and stops, building up slag in the weld. He's welding that huge casting like its a thin body panel.
They actually notch it out and do a root pass etc. It's just skipped in video. It'll hold (until it doesn't) material he's welding is probably cast steel. Hino trucks aren't made of pot metal like in America unfortunately
@@johndowe7003 I watched the same video as you. They V'd out the weld joint and welded it. Didn't see much skipped in the video that would make me change anything in my original comment. That's probably cast steel yes and that tickytack welding technique does nothing but lead to slag inclusions. I'd like to have your amazing skill to see video that doesn't exist lol. A cast steel part is a cast steel part. Shitty welding is shitty welding. I'm not from America and what does that have to do with this guys horrible welding?
@@JT-tz5hp yeah I hadn't got far into the video haha. Idk that tacking technique is pretty ugly but it doesn't seem like they have slag inclusion in it, when he capped it it looks smooth and no worm holes or anything. Dunno honestly and yes it's shitty but it works 👍
If it wouldn't last they wouldn't be in business. It looks rough but they seem to know what they're doing. 6010 will burn through all that crap. I agree the weld is shite. It'll hold though. The shape is thin enough to not need to notch it out very much
That welding is the worst if ever seen it’s not a weld it’s just slag start and stop over and over. It has no structural integrity at all. If you have to beat the slag with a hammer your welding is crap. My kid could do better
Anyone else notice the crack down the center of the weld?
Yep 12:35
Thankyou So Much Putting in a lot of Time & Energy into Making & Editing these Videos…. Well Done!!!! 🦾💯🫡
Our pleasure!
I need an auto tinting iPhone to watch this much welding! Nice work, these videos seem to go by so quickly just because they’re so great to watch.
There is a crack i the center of the weld. Will break again soon
Good process. Restoration of suspension bogie.
These guys can fix anything with a hammer and a chisel.
28% of the weld is slag inclusions, and 32% is porosity leaving 40% of the weld.
Considering the use of 9" grinders at other shops, I'd've expected them to use one here between beads. Must be quicker and not much more expensive than spending time trying to chip and scrape out all the slag.
@@ianhelsbyservices you mean 228,6mm grinders
The last time i saw this many cowboys was at the Alamo
Мужики, вы герои
Encore bravo à vous car vous faite un exelents travail 👍👍👍👍👍👍👍👍
Watched a lot of these vids and have yet to spot anyone using a ratchet. But I will have to say these dudes are masters with a sledge hammer.
Right.
All they need is a sledgehammer and a handfull of dirt.
أللهم صل على محمد وعلى اله وصحبه وسلم....
Nice 👍
La voluntad del equipo de trabajo para realizar todas estas tareas es sorprendente, únicos en su estilo de trabajo, saludos desde Colombia
Удивительные спецы !!!!!!!!!!!
12:33 что варил, что не варил
и Окалина в тапок не летит !
Only mechanics keep the world in motion
Boa noite muito ótimo esse serviço caminhão maravilhoso meu amigo
Profesionist!
👏👏👏👍
The fact they have jigs means they do a bunch of these. I can’t believe they can fix cast? Maybe they should use a saw. Better fit.
Bhai jaan bta diya kro ye kaam kis jaga ho raha hai or dukan b bta diya kro
Yikes! That welding is atrocious! Just burn that rod in there man. Just starts and stops, building up slag in the weld. He's welding that huge casting like its a thin body panel.
They actually notch it out and do a root pass etc. It's just skipped in video. It'll hold (until it doesn't) material he's welding is probably cast steel. Hino trucks aren't made of pot metal like in America unfortunately
@@johndowe7003 I watched the same video as you. They V'd out the weld joint and welded it. Didn't see much skipped in the video that would make me change anything in my original comment.
That's probably cast steel yes and that tickytack welding technique does nothing but lead to slag inclusions. I'd like to have your amazing skill to see video that doesn't exist lol.
A cast steel part is a cast steel part. Shitty welding is shitty welding. I'm not from America and what does that have to do with this guys horrible welding?
@@JT-tz5hp yeah I hadn't got far into the video haha. Idk that tacking technique is pretty ugly but it doesn't seem like they have slag inclusion in it, when he capped it it looks smooth and no worm holes or anything. Dunno honestly and yes it's shitty but it works 👍
the only welder setting they use is max! you can tell by the arc...
@@cwmbc ya, ya got to in that situation
катаржный труд,на камазе менял ось балансиров чуть не сдох
Mala repair ki gaurantee hy
Kenapa tidak pakai las mig co2 ??
Mantap kawan sukses
💪💪👍👍❤❤
Las soldaduras son mejorables....
👍
I saw a crack in the weld also.
Aise mala repair ho to kitna time nikal leta hy janb
🤝🤝🤝🤝🙏🙏🙏👍👍👍
horrible weld full of pits, cracks, and slag inclusions. Won't last over the first mountain pass.
If it wouldn't last they wouldn't be in business. It looks rough but they seem to know what they're doing. 6010 will burn through all that crap. I agree the weld is shite. It'll hold though. The shape is thin enough to not need to notch it out very much
ฝีมือ👍
👏👏👍👍👍👌
That welding is the worst if ever seen it’s not a weld it’s just slag start and stop over and over. It has no structural integrity at all. If you have to beat the slag with a hammer your welding is crap. My kid could do better
You are right!
Man they must have feet and eyes made of iron not to get their feet burnt and eyes put out by slag and grinding sparks
It says full restoration, but in reality it's just one big f.....up. just terrible, just don't be on the same road.
ТОЛЬКО ЧТО САПРОМАТ И ТЕХНОЛОГИЮ НАХЕР ПОСЛАЛИ
Don't blind your viewers. Put the proper filter on if you're going to film live welding
VERY GOOD WORKERS but very dirty and they and the pieces they make
зер гуд
Wearing loose clothing in that kind of environment is a good idea.
Hino bogie saft too small
TIKTOK?
Very bad welding job.
Your here because of tik tok
No
Вітання з України!!! Для пакистанських слюсарів проблем з ремонтом немає, відремонтують все.