Good information, thanks. I have a question here. Added a key to a 2007 SL550 with the push to start on shifter knob and everything works except the proximity. I tried different proximity keys and nothing. I was told that there might have to be another step but no one know. Do you happen to know what that extra step is to get the key to work with proximity. Thank you. I'm using the autelim608pro and a proximity keyless factory key.
Hi! In Autel IM608 do you can write and activate in IMMO section of the tool as you did to virginize? or have always to go to diagnostic in order to do DAS and SCN coding? Thanks for your feedback
I have a 2011 ML350 4matic bluetec, 3.0 diesel, i`m getting some problems with the ECU, if you are located in Miami area any way that i can contact you to check this issue?
Hello i got a question Did it went well or you had abs esp issues? Which numbers you made sure are the same from the both ECUs.. And that they have same software?
Hi great video quick question I got a 2010 ml350. I desconnect the negative like 6 hours and when I connected back car won’t start don’t do nothing radio screen shows nothing what’s you think it is and how much cost to fix
@@miamiautomobile5566 code. It gave me those code but when I put. The key on it and turned 2 time the lights on the dash don’t show up don’t turn on U010087 -u010187 . 918E - 918f. - 9190 - 9191 - 9194 , 9196, 9197. - D640. C42300 C10087. U010100.
I see you did this one obd. I have w209 with me9.7 and autel wants to do the ecu on bench. Have you done this one? I am replacing this dme because the old one is no communication. Do you have any tips? Or do you know if it can be done? I hear drive authorization is a problem and scn coding. I can’t back up coding because dme is no communication
hi, i live in miami and i have a similar problem. When I bought the vehicle, there was no engine ecu and cluster on it. I bought the ignition and electronic control unit of another car from the internet. I installed it but it didn't work. If you virginize the ecu, will the problem be solved? I have a dxtool d7 pro device, can I introduce the new ecu with it?
@@miamiautomobile5566 well I'll buy the im608 in the middle summer. Can't get rid of my im508 because of the built in vci. It's a lot less to carry. Unless they let me upgrade.
I don’t know what the cost of a new ECU but is it better to get a brand new one? I guess it depends on situations. Even a new ECU we still have to renew it?
Hi, I have a 2004 E55 AMG and I need to clone my original ECU on to a used ECU. Do you know how to do this procedure with the Autel? If so, let me know, I will pay you for the instructions. Thanks brother
Hello I have Mercedes c class w203, my ecu was fried by water. My question is can I put new ecu with different numbers. My old ecu numbers are 646 153 89 79, can I put this ecu 646 153 76 79? Pls if you can replay me I would be so gratefull.
Yes, I believe 508 has same capabilities *IF* you by the xp400. The xp200 that comes with the 508 only does basic key programming. Aside from screen size, and a few other little bs incidentals, the only thing separating the 508 and 608 is that the 608 comes with xp400. Also don't be fooled by the "new xp400 pro" it is essentially the same as the original XP 400 except that it can't do RFID tags / cards.
Hi, thanks for the video. I have this error on a 2016 Mercedes-Benz C-Class C300 4MATIC Sedan when The car's TCU was replaced with a used module. Error: the start enable signal was not issued by control unit -' Drive authorization system'. Will teach-in drive authorization and writing the VIN to the tcu solve the problem?
This is applicable ONLY if ECU is new or virginized(reset) used donor ECU. If you get used donor you have to clear it first. As far as I'm concerned there's only way to do this on a bench, maybe thre's other otpions but im not aware
Good day,pls if u dont mind can u share diagnostic/programming tool plug?im in need of that IM608pro,where can i buy it here in nigeria?if u also dont mind i will need your phone number to contact u on somethings too,thanks
Only if the ECU is not personalize on any car then you can relearn it in another car, but if the ECU is personalize in any car, it's has to be renew before you can relearn again.
![Yeat & Quavo - 5BRAZY [Official Music Video]](http://i.ytimg.com/vi/4XxnTAwyxus/mqdefault.jpg)
Good information, thanks.
I have a question here.
Added a key to a 2007 SL550 with the push to start on shifter knob and everything works except the proximity. I tried different proximity keys and nothing. I was told that there might have to be another step but no one know. Do you happen to know what that extra step is to get the key to work with proximity. Thank you. I'm using the autelim608pro and a proximity keyless factory key.
You need mb star to activate the keyless go
Hi! In Autel IM608 do you can write and activate in IMMO section of the tool as you did to virginize? or have always to go to diagnostic in order to do DAS and SCN coding? Thanks for your feedback
You can write and also change Vin and activate at the same time without doing scn coding
Thank you,is this similar to KIA RIo 2013, I'll be using im608...
I am a mechanic and trying new staff...
Not the same step with kia Rio, you have to copy and write using pin point or eeprom
@@miamiautomobile5566 thank you,mate
Thanks for this lesson but are u saying dat u can get any 272 ECU for R350 and merge it with C300 other
You can only program it on 211 and R 350 Ml350
I have a 2011 ML350 4matic bluetec, 3.0 diesel, i`m getting some problems with the ECU, if you are located in Miami area any way that i can contact you to check this issue?
Not in Miami but trying to move down to united state
Hello i got a question
Did it went well or you had abs esp issues?
Which numbers you made sure are the same from the both ECUs.. And that they have same software?
it went well, no any ABS or ESP issues, it went well bro
he said 58 you said 58 but pressed 56 lol then blamed him hehe love it great vid
it was a mistake by me pressing 56
Good video, you taught a lot.
Thanks
Did you verginise the ECU first? Thanks
Yes i do
Hi great video quick question I got a 2010 ml350. I desconnect the negative like 6 hours and when I connected back car won’t start don’t do nothing radio screen shows nothing what’s you think it is and how much cost to fix
Was there light on the dash when turned on ignition if there is no light replaced the car battery
@@miamiautomobile5566 the battery is practically new I bought it like a month ago
Check the fuses first if none is blown scann the car and send me the trouble code
@@miamiautomobile5566 code. It gave me those code but when I put. The key on it and turned 2 time the lights on the dash don’t show up don’t turn on U010087
-u010187
. 918E - 918f. - 9190 - 9191 - 9194 , 9196, 9197. - D640. C42300 C10087. U010100.
hi Man amazing video did you have to renew the ECU
with I'm608 or you just plug and play
I renew it using im608
Good job! Thank you for sharing.
Was that a used ECU ?
If yes was it virginized before the teach in process was carried out?
Yes it was an old ECU, i virgin it before teach in
SUPER.Regards Adam Poland
Great work, Thanks for sharing👍
is it no need scn coding？
Good video sir 👍
I see you did this one obd. I have w209 with me9.7 and autel wants to do the ecu on bench. Have you done this one? I am replacing this dme because the old one is no communication. Do you have any tips? Or do you know if it can be done? I hear drive authorization is a problem and scn coding. I can’t back up coding because dme is no communication
You can get ECU without doing scn coding, just do learning process and you are good to go
Tank you to much sir Good Job
Will tge transmission work also?
Yes the tge will work also
hi, i live in miami and i have a similar problem. When I bought the vehicle, there was no engine ecu and cluster on it. I bought the ignition and electronic control unit of another car from the internet. I installed it but it didn't work. If you virginize the ecu, will the problem be solved? I have a dxtool d7 pro device, can I introduce the new ecu with it?
I don't know if dxtool can do that, but im608 and cgdi can do the job, but if the ECU is already virginized your system can merge it to the car
Would this work the same for the im508. Because my customer changed the ECU in there c240 but traded the original ECU in as core.
No, im508 has do not have the function
@@miamiautomobile5566 well I'll buy the im608 in the middle summer. Can't get rid of my im508 because of the built in vci. It's a lot less to carry. Unless they let me upgrade.
Nice video
I don’t know what the cost of a new ECU but is it better to get a brand new one? I guess it depends on situations. Even a new ECU we still have to renew it?
You didn't have to renew an new ECU
Are the ecu is maked virgin before do this procedure or no ?
Yes the ECU was virgin before carrying out the procedure
Thanks for your reply and thear is no other way to program like ktaq ?
Hi, I have a 2004 E55 AMG and I need to clone my original ECU on to a used ECU.
Do you know how to do this procedure with the Autel? If so, let me know, I will pay you for the instructions. Thanks brother
You can swap the eeprom ic
Hello .sorry, but I didn't get the first part. Don't you have to read the info from the old ecm first and store it ,to transfer it to the new one?
When ECU is unlocked you can go with this procedure
@miamiautomobile5566 so you need a " virgin ecu"? If I buy one of ebay it will not work? Thanks for answering!
Can I do it with my launch
Yes you can, depends on the kind of launch you are using
Just subscribed, amazing tutorial but why not turn your phone around so we can see the full screen, please!
Noted, thanks bro
Good Job
Great vid
buen video , como puedo ubicarte en Miami.
Sorry can you write in English let me understand what you meant
Can thinktool pros do same ?
I don't really know about thinktool
Hi brother I order the im608 which country are you at?
Sorry for replying too late, from Nigeria
@@miamiautomobile5566 hi can one carry out this same service on a 2001 c240
@@jamesdaniel6843 yes you can, when you renew the eeprom in the ECU
And you were are you from
Hoping to learn more
Good job 👍🏻
I love this video girls says 5 8 then he proceeds to enter 5 6 and blames the girl. Hahahahahahaha
ok great video, but u need mercedes star to do gear teach in for the ISM otherwise the car will start bt no drive... thanks for the video
You can also use im608 to teach in ism and vgs but relearning engine ECU get nothing to do with ism
is it no need scn coding ?
No need, but on some ECU you can do scn coding
Cool excelente 👌
good working
EXCELLENT thanks
Super cool 👍
What vehicle did u get ecu from?
R class 350
What scanner is this?
Autel im608
Hello I have Mercedes c class w203, my ecu was fried by water. My question is can I put new ecu with different numbers. My old ecu numbers are 646 153 89 79, can I put this ecu 646 153 76 79? Pls if you can replay me I would be so gratefull.
Yes it will work, 89 79 and 76 79 will work for each other
@@miamiautomobile5566 Thank you brother for your reply ❤️
Can IM508 with XP400 pro do this?
Yes, I believe 508 has same capabilities *IF* you by the xp400. The xp200 that comes with the 508 only does basic key programming. Aside from screen size, and a few other little bs incidentals, the only thing separating the 508 and 608 is that the 608 comes with xp400. Also don't be fooled by the "new xp400 pro" it is essentially the same as the original XP 400 except that it can't do RFID tags / cards.
Yes im508 can do the same for you if you have all the accessories
Hi, thanks for the video. I have this error on a 2016 Mercedes-Benz C-Class C300 4MATIC Sedan when The car's TCU was replaced with a used module. Error: the start enable signal was not issued by control unit -' Drive authorization system'. Will teach-in drive authorization and writing the VIN to the tcu solve the problem?
You need to do scn coding on the vgs4 , online programming will soft the issue, you need original MB star to do the programming and coding
2016 should be fbs4
Hello I'm trying to replace the ecm but I don't have the old one
Which model
@@miamiautomobile5566 SLC 550
Specify the year model of the benz
@@miamiautomobile5566 2007 CLS 550
Hi
Try today with w221 2007 with me9.7 ecu use im508 no success.
What are you trying to do with im508 , do you want to reprogram or renew the ECU
This is applicable ONLY if ECU is new or virginized(reset) used donor ECU. If you get used donor you have to clear it first. As far as I'm concerned there's only way to do this on a bench, maybe thre's other otpions but im not aware
I need a know programming car mercedes of the leptop..
You mean you want to know if programming can be done a laptop, yes
I'm super dead FIVE EIGHT MUTHA FUCCAH! 🧐
I need a Mercedes ecu programmed in Orlando and can’t find anyone
Sorry about that bro, i don't know anyone in Orlando, i will av connect you, but if you av a system with team viewers i could av assist
This is will not allowed from mercedes benz you have to virgin yr ecu then do yr settings
Teacher i need a more any think. Please you teach me teacher. Thank you?
I need a know programming car mercedes of the leptop..
You can program with Mercedes Benz laptop which is the best
You typed vin in wrong. 8 was the last digit you pressed 6.
Mistake but corrected
U put a 6 instead of 8
Mistake my brother but later corrected
Gj
Hi
Hallo
Your vid is very poor man can't see the whole screen it the diagnostic machine
Good day,pls if u dont mind can u share diagnostic/programming tool plug?im in need of that IM608pro,where can i buy it here in nigeria?if u also dont mind i will need your phone number to contact u on somethings too,thanks
You can call on 08020796860
Ok thanks, i will give u a call sir .
Hi, you dont need to virginize this ecu?, only with this steps can do it? I have c280 2008 same ecu me 9.7
Only if the ECU is not personalize on any car then you can relearn it in another car, but if the ECU is personalize in any car, it's has to be renew before you can relearn again.
@@miamiautomobile5566 how can we renew the ecu please i try to brogram used ecu and I filled withe autel the car is c280 me9.7