I worked in a body shop (painters helper). Let me tell you. You put WAY more effort then what these body man that do this for a living lol. Love the content and keep up the excellent videos
Sorry to hear that. I need a shop for her to roam. My house is too close to a busy street and I worry if she takes off. She will be a regular at a new shop, you can count on that!
I’d like to see a video of bloopers. Just the one at beginning was enough to make me chuckle. PS Have you been to doctor? Must be something wrong if YOU are cleaning! 🤣
Nice job Scott. I agree with the comment about white vehicles. I've had a few over the years & they are a SOB to keep clean looking. Big improvement with the wheels & tires & a good price. The only thing I have left on my bingo card is a sharp or new razor blade so you can do yourself an injury. You & the Pizza Girl have a great New Years. See you then.
I'm not sure if the 14 is the same as the 19, but the one I drove the cup holder rubber part comes out and can be washed in the sink. I miss that 19 2500hd. It's one of the best trucks I ever drove.
Sitting here drinking my tea, yes I’m from Ireland and I can smell the air filter from here it’s a wonder that air got anywhere 😊I suppose if the mechanic job doesn’t work out you could become a plastic surgeon 😊, nice job Scott
For the door handles I use the pick method myself, I had a guy show me his method of using fishing line but by then I had used the pick method so much it is just faster for me to use the pick.
Scott, dont know if the detail Gnome or you have ever done this but heres a tip. When I deep detail a vehicle I pop off all plastics I can including console pieces like cup holders and even AC vents. I then stick them in the dish washer and do a heavy load cycle. They come out perfect most of the time. And never have had one melt on me. It saves me a lot of time hand scrubbing.
When cutting wires, clamp a sawsall blade into vise grips, make sure the little tab is against the inside of the jaw so the blade does not rotate. This way you are pulling towards your self when cutting.
Nice truck, the wheels are much better. It’s incredible what good tires can do to improve noise, and handling on pickup trucks. Lots of good detailing tips in this video!
Super video Scott! I really enjoyed this plus the console stew. Maybe someday they’ll make non-stick consoles. This is going to make some lucky individual very happy. New engine, all the damage fixed, interior looking great. See you in the next one! 😊
Love the channel, found you about two months ago, reviewing all your old videos, great sense of humor, I know the struggle, lived in Michigan years ago but enjoying Colorado now.
Scott!!!!! ….but, but, you didn’t even vacuum the carpet right!!!!! You were supposed to take the seats out, and remove the plastic carpet sills!!!! 😂 Just kidding Sir!!!!!! I hope you had, and are having a wonderful Christmas holiday season. 🎄 ….Love your work!!!
Holy poop! You live a few minutes north of me. Don’t worry, I won’t say where or give any hints. I’ve been watching your videos for a while and all of a sudden I recognized the trailer park across from you. And now I’m realizing I saw the envoy for sale online locally and didn’t put 2 and 2 together, I didn’t think it was the same one.
If you go to the car shows in the summer north or south of you I’m the guy with the black/tan Lincoln with the bull horns in place of the hood ornament.
My address is listed on my website, it is no secret anymore. My new shop will be! My storage yard location will soon be released as well. The internet knows what doesn't matter to me. Big changes coming to my old house in 2025!
@@vehcor gotcha, I didn’t want to put your location out there if it was a secret. The internet is full of odd people, myself included. Myself, I live in downtown Lockport, grew up on the lemont/homer border. I was surprised to find a RUclipsr so close.
Aaawww man I thought another canned ham video.. ill settle for a Bowtie beauty. Scott i will say. You take a great amount of elbow grease on all that touches your hands. Great Job. Hope your Christmas was good. Stay safe and be well. Thanks for sharing.. woo hoo year 5 I've been watching
Great job! Yeah, in Florida, you gotta lift... And you gotta go a lot bigger on wheels & tires... It does seem to be a state law..... Great deal on the wheels, holy crap.....
I want step by step panel or door swap. Mainly to show the paint around the mounting holes. Te panels I bought are painted but not around the mounting holes. This is likely because the parts are installed before paint.
Love how you had to look at the truck again after calling it a GMC and almost did it again.😂 Then cleaning a remove able cup holder! Cleaning is zen. I'm not much of a truck guy but lately wouldnt mind one like this. Looks good.. The new rims helped. You can always use a truck.
6:42 not an attacker from comments i want to learn. does the lift side of the air filter that you removed the dirty filter from gets dirty? or all the dirt comes out with the filter and does not stick with the air filter
Those wheels look good on that. Wicked deal too. When you clean the cupholders you can remove that rubber completely and bring it to a sink. Dont know if you knew or not.
My Santa Fe used to vary by about 1 MPH between the dash speedometer and the GPS speed, consistently. Had to get new tires and found out that the next trim line up in my model year came with different sized tires, about 1 inch larger diameter on the same wheels.it raises the car by about 1/2 inch. Now my dash and GPS speed matches. My average MPG is down a slight bit, probably because of the tire compound but also because of the distance travelled calculation per tire revolution. The rev counter is on the transmission, but the tire size assumption is hard coded into the mileage and distance travelled computation. Wierd little bit of learning, so I thought I would share.
Scott - I'm sure you know this, but for everyone else ... that center console piece you were cleaning comes out. Easier to clean the rubber part by itself and you can get the crud out of the plastic cup area (normally under the rubber part when installed) which inevitably seeps down past the slots in the bottom.
Hope you had a good Christmas Scott, surprisingly my SEAT’s cup holders and cubbys have removable rubber mats, even the key fob holder has one too… Used to detail cars over 30 years ago, and often found plenty of ‘lunch tokens’ in cars and vans I detailled
I like many others could say even the truck was to dirty even for you to drive around and pick up other projects, personly though i would drop the truck even lower to the ground and only have 5 inches or 125mm of clearance between the step and the ground
I worked in a body shop (painters helper). Let me tell you. You put WAY more effort then what these body man that do this for a living lol. Love the content and keep up the excellent videos
Thanks for the support!
@@vehcorwe use compressed air or electric. Leaf. Blowers to vacate the dirt from floor. Seats
@@vehcoryou cleaning the inside of that truck was my Christmas present!!!
It brings me a great deal of satisfaction when I see you use the belt moulding installation tool for its actual intended purpose.
Great video as always. Need more with the supervisor in them, as i just lost mine christmas night. I think it was her intestines. Hug yours for me
Sorry to hear that. I need a shop for her to roam. My house is too close to a busy street and I worry if she takes off. She will be a regular at a new shop, you can count on that!
I respect your no-nonsense honesty. Pricing info is always a treat to stay educated.
Should paint lower panels on door a med grey to accent body
I’d like to see a video of bloopers. Just the one at beginning was enough to make me chuckle.
PS Have you been to doctor? Must be something wrong if YOU are cleaning! 🤣
I try to include the funny bloopers. I don’t have many more.
Yeah you do its called burning the shop the wrong way 😂
The rubber cup holders in the center console just come out for easy cleaning
Nice job Scott. I agree with the comment about white vehicles. I've had a few over the years & they are a SOB to keep clean looking. Big improvement with the wheels & tires & a good price.
The only thing I have left on my bingo card is a sharp or new razor blade so you can do yourself an injury. You & the Pizza Girl have a great New Years. See you then.
Happy New Year to you as well and I’ll try and find it in the budget for one of those fancy new sharp razor blades! 😂
From the way you rapped the whisk, I mean acid brush on the side of the pot, I mean console, I can tell you have some cooking skills 🔪😂
Unfathomable bonus content...worth the years-long wait to see these unprecedented acts. I never would have believed it if I hadn't seen them myself.
I'm not sure if the 14 is the same as the 19, but the one I drove the cup holder rubber part comes out and can be washed in the sink. I miss that 19 2500hd. It's one of the best trucks I ever drove.
thank you for greatly expanding my automotive skill
Sitting here drinking my tea, yes I’m from Ireland and I can smell the air filter from here it’s a wonder that air got anywhere 😊I suppose if the mechanic job doesn’t work out you could become a plastic surgeon 😊, nice job Scott
Another Damn fine video ! Keep em coming !
Thanks! I appreciate it!
Yeah had center console in van pulled it out and dunked it for a week to get the icky. Stuff pff😊😊
Rust belt cars are so special, we have to buy ,ore fun tools to work on them! Great video!
For the door handles I use the pick method myself, I had a guy show me his method of using fishing line but by then I had used the pick method so much it is just faster for me to use the pick.
Wheels and tires look way better and i'm sure the ride is a night and day difference.👍
Absolutely night and day! It was the deciding factor in keeping the truck a little longer than expected!
Your hair looks good today. I can say that because i think we have the same barber
😂
I can hear the clean freaks from Canada 😅
😂
Scott, dont know if the detail Gnome or you have ever done this but heres a tip. When I deep detail a vehicle I pop off all plastics I can including console pieces like cup holders and even AC vents. I then stick them in the dish washer and do a heavy load cycle. They come out perfect most of the time. And never have had one melt on me. It saves me a lot of time hand scrubbing.
Good one Scott I really like your meticulous nature. Thanks John from Arizona
Thanks John! I just try to do things the right way, even if it takes a little longer.
Look it’s bubbling
Love all of your videos!!! Thanks
Thanks for the support!
Yummmmm……Scott’s “console soup!” Have you thought about making a recipe book? 🤣
Great idea!!
When cutting wires, clamp a sawsall blade into vise grips, make sure the little tab is against the inside of the jaw so the blade does not rotate. This way you are pulling towards your self when cutting.
I live in Florida and your definitely correct about the mandatory lift kit/wheel swap laws here 😂😂
You ain’t lying! 😂
As always, your vehicles look great. Excellent content. Thanks!
Nice truck,I’m impressed how clean that truck was for the year.good video.just keep doing what you do best.👍👍👍😎😎😎
Those southern trucks! There is a reason I drive for hours to get them! Thanks for the support!
I took the body side moldings off my 04 GMC and in my eyes it accentuates The Body Lines better
6:50 "I cleaned that out before" Yeah Right!
I promise! Fine I'll prove it! 😂
Looking at that air filter - time to clean the dryer vent!
Great video enjoy watching keep up the great work
Thanks for the support! Glad you enjoyed the video.
Brodozer!!! Love it!!!
Very nice GMC
😂 🥇
@@vehcorwhat they 40k. Now for a stripper😅😅
Nice truck, the wheels are much better. It’s incredible what good tires can do to improve noise, and handling on pickup trucks.
Lots of good detailing tips in this video!
Nice going, looking real nice. If you can't find your molding remover, try a piano wire sometime. Happy New Year to you !
I hit trifecta on the Bingo Card !
You took all the high payout odds! 😂
Vehcor: clean freak edition
No one saw that coming! 😂
Just another lonely Friday without Mr. Spotty...
Super video Scott! I really enjoyed this plus the console stew. Maybe someday they’ll make non-stick consoles. This is going to make some lucky individual very happy. New engine, all the damage fixed, interior looking great. See you in the next one! 😊
that's pride of Flint, like a rock!
Hope you had a great Christmas. Best wishes for a prosperous new year from Queensland Australia.
Hope you had a great Christmas! Cheers to a prosperous new year from Chicago! 🥉
The first thing that came to mind was "What....he's going to clean it?" :😁
A moment of weakness! 😂
Finally, He’s coming around people! Mr. Spotty says Hi from NorCal…
Love the channel, found you about two months ago, reviewing all your old videos, great sense of humor, I know the struggle, lived in Michigan years ago but enjoying Colorado now.
Scott!!!!! ….but, but, you didn’t even vacuum the carpet right!!!!! You were supposed to take the seats out, and remove the plastic carpet sills!!!!
😂 Just kidding Sir!!!!!! I hope you had, and are having a wonderful Christmas holiday season. 🎄 ….Love your work!!!
Holy poop! You live a few minutes north of me. Don’t worry, I won’t say where or give any hints. I’ve been watching your videos for a while and all of a sudden I recognized the trailer park across from you. And now I’m realizing I saw the envoy for sale online locally and didn’t put 2 and 2 together, I didn’t think it was the same one.
If you go to the car shows in the summer north or south of you I’m the guy with the black/tan Lincoln with the bull horns in place of the hood ornament.
My address is listed on my website, it is no secret anymore. My new shop will be! My storage yard location will soon be released as well. The internet knows what doesn't matter to me. Big changes coming to my old house in 2025!
@@vehcor gotcha, I didn’t want to put your location out there if it was a secret. The internet is full of odd people, myself included. Myself, I live in downtown Lockport, grew up on the lemont/homer border. I was surprised to find a RUclipsr so close.
Thanks for the video Scott. Always informative and entreating.
I don't remember the last time I paid $800 for tires, much less rims and tires. Run Transforce on all the commercial rigs. No complaints there.
I couldn't believe the price. I run them for 100K or more on my trucks.
I know you grew up in the 80’s. White letters out man!!
agreed--white truck-white letter tires 👌
I was staring at the badge, and even I expecting GMC! Not used to the bowtie Scott :P
Nice wheels. Looks clean. Try parking that in the UK. 🤣🤣👍👍✌️🇬🇧
With a 100-point turn, I can park it anywhere! 😂
Aaawww man I thought another canned ham video.. ill settle for a Bowtie beauty. Scott i will say. You take a great amount of elbow grease on all that touches your hands. Great Job. Hope your Christmas was good. Stay safe and be well. Thanks for sharing.. woo hoo year 5 I've been watching
Thanks for the support! Have a great New Year!
Great job!
Yeah, in Florida, you gotta lift... And you gotta go a lot bigger on wheels & tires... It does seem to be a state law.....
Great deal on the wheels, holy crap.....
console stew my favorite.
Scott we have all known for a while you’re definitely a closeted clean freak.
very nice job on the Chevy pickup. wish I had your skills and experience
Nice looking Chevy 2500HD!
Thanks! 👍🏼
I want step by step panel or door swap. Mainly to show the paint around the mounting holes.
Te panels I bought are painted but not around the mounting holes. This is likely because the parts are installed before paint.
Love how you had to look at the truck again after calling it a GMC and almost did it again.😂 Then cleaning a remove able cup holder! Cleaning is zen. I'm not much of a truck guy but lately wouldnt mind one like this. Looks good.. The new rims helped. You can always use a truck.
Truck looks great. Good job Scott. Cheers.
See you next year.
I had NO idea that you even knew how........ I need to go buy a lotto ticket now.
😂
Heh heh always nice when you can come out even, or ahead, on a deal like your wheel swap. Well played.
Every time he walks off I hear Pale!😂
6:42 not an attacker from comments i want to learn. does the lift side of the air filter that you removed the dirty filter from gets dirty? or all the dirt comes out with the filter and does not stick with the air filter
Whiskey tango foxtrot with all this cleaning shit Scott
moment of weakness. 😂
Thanks Scott! Great job and great content. Happy New Year!
Happy New Year! Thanks for the support!
Merry Christmas to you and all the gnomes
Same to you and a Happy New Year!
I remember the Ford Exploders.
Those wheels look good on that. Wicked deal too. When you clean the cupholders you can remove that rubber completely and bring it to a sink. Dont know if you knew or not.
OMG!! There's actually a video in witch THE EMPORIUM MASTER cleans.......😁🤣👍
😂
You don't necessarily have to be crazy to be a car guy but it helps, a LOT!
Looks heaps better on original spec wheels.
For a moment there, I thought you were making all of us an omelet, yum!!!!!
Them wheels you got in Florida are a lot better looking then the steel ones
I thought so as well!
NICE RESULT!!!
Great job as always 👍🏼
Thanks, I appreciate it!
I love watching your videos. I have two questions.
1. What does VEHCOR stand for?
2. Have you found a new permanent shop to work out of yet?
My Santa Fe used to vary by about 1 MPH between the dash speedometer and the GPS speed, consistently. Had to get new tires and found out that the next trim line up in my model year came with different sized tires, about 1 inch larger diameter on the same wheels.it raises the car by about 1/2 inch. Now my dash and GPS speed matches. My average MPG is down a slight bit, probably because of the tire compound but also because of the distance travelled calculation per tire revolution. The rev counter is on the transmission, but the tire size assumption is hard coded into the mileage and distance travelled computation. Wierd little bit of learning, so I thought I would share.
FYI, the next time, use some windex or slightly soapy water sprayed onto the moulding and it helps the squeegee to slide and break the glue free.
Happy New Year ： I Come from Hong kong❤🎉
Thanks for watching, Happy New Year!
Scott - I'm sure you know this, but for everyone else ... that center console piece you were cleaning comes out. Easier to clean the rubber part by itself and you can get the crud out of the plastic cup area (normally under the rubber part when installed) which inevitably seeps down past the slots in the bottom.
A whole video of Scott cleaning... the utube algorithm must have rotted his brain. 🤣
Great video on this rebuild Scott. Have you figured out what your plans are on a new shop or anything yet? Im addicted to your videos. Lol.
There was also the great Firestone debacle of the 70’s where they wouldn’t replace all of the bad ones.
Awesome job, buddy!
Thanks!
Any updates about the garage fire?
I have not posted one so I am going with, no.
Nice truck probably the only GM product I would consider owning
Maybe something with an LS or LT engine but I agree, after 2005, I lost faith in GM.
You missed a few spots on the passenger side carpet vacuuming 😂
I can't do all of the detailing gnome's job! 😂
What is the spray rust proofing?
🤠Happy Friday
Same to you! 🥈
Hope you had a good Christmas Scott, surprisingly my SEAT’s cup holders and cubbys have removable rubber mats, even the key fob holder has one too… Used to detail cars over 30 years ago, and often found plenty of ‘lunch tokens’ in cars and vans I detailled
Hello Scott I hope you had a good Xmas.
It was a great Christmas, how about you?
I did . Thanks
I like many others could say even the truck was to dirty even for you to drive around and pick up other projects, personly though i would drop the truck even lower to the ground and only have 5 inches or 125mm of clearance between the step and the ground
Nice!
You definitely make me laugh with the picaso comment 🤣 😂
love the factory rims by far better
Scott have you shown how you retape the molding and emblems, if no then i know i would be interested in seeing that
Awesome video though I was a little disappointed you didn’t polish/clean the headlights they looked pretty foggy and dirty 🤔
"Those mirrors aren't cheap. But I am". lol
Cleaning actually took me by surprise, I am one of those people hahahaha