Like to use a frost proofer when temps get down to 4-5 region just case it gets lower through the night. To be honest always otpimix plastiser which has slight frost proof and shrinkage cover. Raimundi pedalo brilliant. Never had any luck with azpects grout. There primer is good. Stick to Marshalls primer mostly. Johnny boy superb work pal. 😎😎🤟
Hi Johnny boy Hope your keeping well mate, looks a lovely job mate and revisiting afterwards it has adged well mate, lovely work pal❤️❤️, its dangerous in this weather ( dropping below 5c) of a night before the grout has cured, but its a looking at the weather and temp game and using your experience to get through,👍👍 and crossed fingers it stays a bit warmer, kepp safe mate and all the best
Hi Johnny… I’ve a couple of questions if you have a minute. Am I ok using screed from a concrete plant to lay porcelain tiles instead of sharpe sand and cement? What’s the best slurry for back of tile? And do you reckon sthil saw with porcelain blade is ok for doing the full job all cuts are going to be square ? Cheers
Using EasyGrout with 5mm gaps how many tubs would you use on 45 square metres with 20mm 600 x 900s John ? approx ? I had a merchant measure it up at 2 tubs !! but wondered in real life if that was about right.
Richard mate to be honest the Merchants wont know as it just depends on how deep the joints are and even you wont know that, just get three tubs and try that and see how it goes, if you dont break in to the 3 one take it back mate
Great job. Thanks for video
Thanks for watching!
Lovely job Johnny Boy.
Do you recommend Easy Grout for 10mm joints?
Thanks Ricardo, I think 10mm is very wide
@@GreentopLandscapes thanks bud would it be best avoiding a slurry grout in this case?
Like to use a frost proofer when temps get down to 4-5 region just case it gets lower through the night. To be honest always otpimix plastiser which has slight frost proof and shrinkage cover. Raimundi pedalo brilliant. Never had any luck with azpects grout. There primer is good. Stick to Marshalls primer mostly. Johnny boy superb work pal. 😎😎🤟
Thanks Bud
Hi Johnny boy
Hope your keeping well mate, looks a lovely job mate and revisiting afterwards it has adged well mate, lovely work pal❤️❤️, its dangerous in this weather ( dropping below 5c) of a night before the grout has cured, but its a looking at the weather and temp game and using your experience to get through,👍👍 and crossed fingers it stays a bit warmer, kepp safe mate and all the best
How are you Sir
Hi Johnny… I’ve a couple of questions if you have a minute.
Am I ok using screed from a concrete plant to lay porcelain tiles instead of sharpe sand and cement?
What’s the best slurry for back of tile?
And do you reckon sthil saw with porcelain blade is ok for doing the full job all cuts are going to be square ?
Cheers
Call me Gareth sometime
Using EasyGrout with 5mm gaps how many tubs would you use on 45 square metres with 20mm 600 x 900s John ? approx ? I had a merchant measure it up at 2 tubs !! but wondered in real life if that was about right.
Richard mate to be honest the Merchants wont know as it just depends on how deep the joints are and even you wont know that, just get three tubs and try that and see how it goes, if you dont break in to the 3 one take it back mate
@@GreentopLandscapes Thank you mate, good advice, I will get 1 more :)
Love your work but hate how you say porcelain 😂 keep up the good work boys
Thank you I will check it out
Lovely job 👍🏻👍🏻
Thank you! 😊