I think your husband do good jobs for you. Anyone can't do every thing and anyone has his merit. I don't make money. My wife does. So I love her much more. Sorry.
Buy a good routher table and raised panel router bits.....It's much less work and you will actually get a much better fit with the rails and styles. The call it cope and stick....Just a thought for the future....I admire your craftsmanship !!!!
보기 참 좋네요. Could I ask why you divided the door into half the tall way as well and not just do 2 long doors? Is it for aesthetic purposes or would the door not close properly if it is too long?
Beautiful work, I think I'll try and make one. By the way, what is the title of the song that plays at the end of the video? It's a really relaxing tune.
@@j-woodworking9573 Thank you, I'll try and find it. If you make another on of these shoe racks, add the measurements so we can try and make it without to much guess work.
I honestly dont know why i never though to just nail on some small boards for shelfing before joining everything together, usually id use a router but that runs the risk of having ugly joints if you screw up, or your wood isnt planed perfectly, another really helpful tip.
저도 목공으로 먹고살지만 늘하던 칫수를 꼭 하루에 한번씩은 틀립니다ㅠㅠ 눈이 노안이 찾아와서 줄자 눈금 잘못보고 100미리를 더 자를때도있고 환장하겠습니다. 그러다보면 부재가 낭비되고 시간은 잡아먹고 작업은 느려지고 체력은 빠지고ㅋ 그 와중에 파워메틱 테이블쏘 엄청 부러워 하고 갑니다.
If you use the raised panel router bits you can fit the corners of the rails and styles, glue them and then pin nail them thru the back side eliminating the edge screws and holes. I use a 23 gauge pin nailer on the backside of the door......invisible to the eye....
These are just tips and tricks I learned please do not take anything I post here as a negative. Drill the pocket holes for the hinges before you build the door on a drill press with a jig. Every hole comes out more accurate and you can set a stop on the drill press for the depth so all the holes are the same depth....Just the tricks of the trade someone else taught me.
The problem I have with this is that when he drills countersinks, he just drills the most shallow spot for the head of the screw. Then, screws in 2" screws all the way through with no pre-drilling the holes.
나사를 깊게 체결하고 그 위에 도웰(나무못)을 박아서 가립니다. 하지만 판재의 두께가 얇으면 나사의 체결 두께가 부족해 판재가 터지게 되므로 이 방법은 좋지 않습니다. 이경우 나사를 사용하지 않고 곧바로 나무못 체결을 권합니다. 다른 방법은 저도 모르겠네요. 감사합니다.
That is not a shoe rack, you give yourself too little credit. Racks don't have fancy things like hinges or door panels, the word rack needs to be upgraded severely. A better word than Shoe Cupboard. It is a full blown Kitchen Class: Shoe Cabinet
Like always doing beautiful work, thanks for sharing your videos.
The sense of cleanliness and tidiness of your workshop matches your work that I deem to be excellent
You think highly of me.
Thanks sir.
A very spacious shop with beautiful copious amount of natural light through the windows. Meticulous man who takes time for flowers.
Very beautiful job..love carpenter work..from Seychelles
Beautiful! Such artistry!
Thanks for watching sir.
excellent woodworking skills you have. I loved your dove tail only book shelf video too. Cheers from Raleigh, North Carolina, USA.
Excellent job, simple with no nonsense. One comment though I think you bring your fingers too close to the saw blade
I am from Bangladesh. Very nice
Вы очень большой мастер!! Так приятно смотреть как Вы работаете...
Thanks for watching sir.
I wish my husband can make 1like that for me, it's beautiful good job thanks for sharing this video👍😊
I think your husband do good jobs for you. Anyone can't do every thing and anyone has his merit.
I don't make money. My wife does. So I love her much more.
Sorry.
This gentleman is so talented amazing 😊😅
I watched Your video with great pleasure! We wish you success in Your work!
Thanks for your encouraging comment sir.
Excellent job!!! 👏👏👏
رائع يا عزيزي تحياتي من مصر
A truly awesome and talented carpenter !
Thanks for watching sir.
Good job. Congratulations
Thanks for watching sir.
Beautiful Job Man very nice.🙏👌👊
Thanks for watching sir.
Great work sir love to see woodworking on you take care! 👍😍
Thanks for watching sir.
Wow..
Thank for the video.. could you please give me the measurement ???? Please
Sorry I don't have plans. Thanks for watching sir.
Perfeito. Parabéns. Fortaleza, Brasil.
Very useful - always good to see how others do good work with simple methodical and careful attention to details - I love the raised panels .
Thanks.
Buy a good routher table and raised panel router bits.....It's much less work and you will actually get a much better fit with the rails and styles. The call it cope and stick....Just a thought for the future....I admire your craftsmanship !!!!
Just subscribed. Great work, sir. Greetings from Malaysia
Thanks for your new subscription sir.
Very nice indeed....LOVE IT!!
That's a nice looking cabinet....I think the next thing you need to build is a bench to do all of your assembly on.
Now I've made it.
보기 참 좋네요. Could I ask why you divided the door into half the tall way as well and not just do 2 long doors? Is it for aesthetic purposes or would the door not close properly if it is too long?
The customer asked to do so.
Thanks for watching sir.
Buen trabajo felicidades bendiciones saludos desde México
Thanks for watching sir.
¿Ahora Kojima construye muebles? no cabe duda que ese tipo en un chingón. ; ) Jajajaja
Thanks for watching sir.
@@j-woodworking9573 Desde ya te digo que voy a copiar muchos de tus trabajos. Eres un buen carpintero.
where would i get the plans with exact measurements for this jog
Nice 👍
Thanks for watching sir.
Beautiful work, I think I'll try and make one. By the way, what is the title of the song that plays at the end of the video? It's a really relaxing tune.
Sorry I don't know. It came from RUclips free music corner.
Thanks for watching sir.
@@j-woodworking9573 Thank you, I'll try and find it.
If you make another on of these shoe racks, add the measurements so we can try and make it without to much guess work.
Yes I will.
Thanks again sir.
테이블쏘 만으로 제작하는법 영상이 넘 감사합니다.👍
감사합니다
Kreg makes a shelf pin hole drill guide for adjustable shelf pins.....It's a must....!!!
Raymond Pontremoli: You are annoying as F@#$
Subcribed - I'm your new fan. Good work sir. From Malaysia.
Thanks for subscribing sir.
Good video im form 🇱🇰 srilankan
Nice to see you Mr. Sriankan.
lovely Job just wish you would make yourself a decent push stick to keep your fingers away from that saw blade
Thanks.
Now I have changed my bad way of working.
I fully agree with your advice.
Magic ! a dream for me !
I honestly dont know why i never though to just nail on some small boards for shelfing before joining everything together, usually id use a router but that runs the risk of having ugly joints if you screw up, or your wood isnt planed perfectly, another really helpful tip.
I was looking for a simple one but I found this
Hi from Oman, I like your woodworking but please make sure to share the measures every time, and what about the finishing works?
sorry.
It's hard to share the measures because I make hand sketch for work.
I applied finishing oil on it.
Amazing
공간과 장비,,,,없는게 너무 많어,,,부럽다
very nice sir! subscribed!
Thanks sir.
멋집니다 . 잘보고 갑니다. 감사합니다.
자주 드러주셔서 감사합니다.
Klasse, Sie sind ein echter Profi !!
Thanks
Es excelente su trabajo...Nuevo Suscritor me agrado👍
1년전 영상이지만 잘 봤습니다
Feat. 아양교 이쁘네요
감사합니다.
good job !
Thanks for watching sir.
Have some great energy! (I subscribed)
well done!!!!!
Thanks for watching sir.
Приятно смотреть на Вашу работу...! Это Ваш бизнес или увлечение?
Thanks sir.
I need to know what is the name of this kind of wood.
저도 목공으로 먹고살지만
늘하던 칫수를 꼭 하루에 한번씩은
틀립니다ㅠㅠ
눈이 노안이 찾아와서 줄자 눈금 잘못보고 100미리를 더 자를때도있고
환장하겠습니다.
그러다보면 부재가 낭비되고
시간은 잡아먹고 작업은 느려지고
체력은 빠지고ㅋ
그 와중에 파워메틱 테이블쏘 엄청 부러워 하고 갑니다.
저도 자주 실수를 합니다
50 중반이라 눈도 밝지 못하고요
하지만 열심히 합니다
화이팅입니다
감사합니다
Nice!
Thanks for watching sir.
If you use the raised panel router bits you can fit the corners of the rails and styles, glue them and then pin nail them thru the back side eliminating the edge screws and holes. I use a 23 gauge pin nailer on the backside of the door......invisible to the eye....
Very good sir
Plz make sofa come bed
I am from India
Yes, l will.
These are just tips and tricks I learned please do not take anything I post here as a negative. Drill the pocket holes for the hinges before you build the door on a drill press with a jig. Every hole comes out more accurate and you can set a stop on the drill press for the depth so all the holes are the same depth....Just the tricks of the trade someone else taught me.
What kind of wood you are using?
Хороший канал
On more thing.....Glue..!!!! Every hear of it....It's amazing stuff....Holds wood together much better than brad nails.
Excelente demostración de orden y disciplina, muy buen trabajo, gracias por compartir, recibe un cordial saludo desde Aguascalientes, México... :o)
Thank you very much sir.
Would be great if you can share the measurement details
but why screw the shelves to the sides with the visible screws
Sorry.
That depends on the payment by buyer.
I made the video while I made the shoe rack ordered.
The problem I have with this is that when he drills countersinks, he just drills the most shallow spot for the head of the screw. Then, screws in 2" screws all the way through with no pre-drilling the holes.
I drill, countersink, and screw in turn actually. But in videos most of times I omit them for simple video production purpose.
Run a dado on the inside surface of the sides and top back edge....slide the back in...do not glue it and pin nail it thru the dado...
thanks for your kind advice. I learned a lot.
Amazing..good job
good job. is it possible to share your measurements? tks
Sorry I don't have the schematic.
And the shoe has been delivered to the client. Sorry again.
훌륭합니다.
집성판은 어떤소재인지요?
뒷판도 궁금하군요
잘보고 좋은 아이디어 담아갑니다~
미송 집성목과 뒷판은 낙엽송 합판을 사용했습니다
this furniture is great but I would have liked to know measures.
this father everything you can create that I love ...
""""thanks""""
Thanks for watching sir.
I don't have the measurements now. Sorry gorgeous lady.
👍🏻👍🏻👍🏻
Thanks for watching sir.
오호라!잘만드네요~(하윤씌^^)
Eres un crack!!
우와~ 신발장으로 쓰기엔 너무 아깝다....
장소도 넓고 작업대도 있는데 그 비싼 테이블 Saw에서 gluing 하시는 저 한국인의 용기.....
더 좋은 영상을 만들기 위해 때로는 평소와 다르게 작업을 하기도 합니다. 카메라 앵글, 조명, 촬영의 효율 등의 이유로ᆢ 적당히 이해하고 보시면 되겠습니다.
감사합니다.
What is price of this????
혹시 별다른 도구없이 나사를 안보이게 하는 방법이 없을까요?
나사를 깊게 체결하고 그 위에 도웰(나무못)을 박아서 가립니다. 하지만 판재의 두께가 얇으면 나사의 체결 두께가 부족해 판재가 터지게 되므로 이 방법은 좋지 않습니다. 이경우 나사를 사용하지 않고 곧바로 나무못 체결을 권합니다.
다른 방법은 저도 모르겠네요.
감사합니다.
@@j-woodworking9573 감사합니다
Congratulations, your work is very good !! If possible add subtitles in Brazilian Portuguese
I'll think about it.
In the future, probably.
I have hard time writing English.
Anyway, I am sorry I don't speak Portuguese.
@@j-woodworking9573
All right. I keep admiring and learning from your work !! Hugs!!
👍🏻👍🏻👍🏻🥇🥇🥇💪🏻🇷🇺Россия
Thanks for watching sir.
Price
Ah, y ya me suscribí ....
Thanks sir.
👍
Thanks for watching sir.
신기하네요^^구독할게요
감사합니다
Wold you share the plans and measurements with me I am not that good but I can fallow plans. thank you!!
Sorry sir. I don't have the plan. The shoe cabinet has been delivered.
신발장 주문하면 얼마쯤하나요
양팔벌린넓이 높이는 180 센치
영상 속의 신발장은 130w x 125h cm이고 60만원에 작업했습니다
문의하신 건은 크기가 꽤나 크군요
참고하세요
我真的很喜欢这家具，但没有度量或数量
Wǒ zhēn de hěn xǐhuān zhè jiājù, dàn méiyǒu dùliàng huò shùliàng
Thanks for watching.
From Korea.
Exposed screws? Really? Especially when it could have been easily avoided.
That depends on the order. The client asked me to do that because of cost.
Thanks sir.
where are the plans?
Sorry.
I didn't prepare the plan.
👌👍
Attento alle mani Giappo. Be carefull for your hands with the saw Jappo.
Yes I'll be careful.
Thanks.
Wonderfull work
I thought only American woman had too many shoes.
mettre mesure des morceau de bois merci du mont st michel
Thanks for watching sir.
⭐⭐⭐⭐⭐
알판에 본딩하는건 아니라 생각되는데요
좋은 지적 감사합니다
많이 부족합니다
That is not a shoe rack, you give yourself too little credit.
Racks don't have fancy things like hinges or door panels, the word rack needs to be upgraded severely.
A better word than Shoe Cupboard.
It is a full blown Kitchen Class: Shoe Cabinet
Thanks for watching sir.
job is good ; the dising not so . for women shoes will not work
perfect example how not to assemble cabinet doors and cabinet itself. Sorry dude.
Some extremely DANGEROUS table saw practices here. BEGINNERS: DO NOT copy him.