I just bought this lol. Got a marvel legends across the spiderverse Miles from work and I'm pretty happy with it, mainly cause they're no good bootlegs of an import figure yet. But this will go nicely with that, Miles figure. The fact the only real problem with this Peter (other than the obvious minor paint issues) is that neck, and that it's such an easy fix is crazy. Definitely worth the effort in my eyes. I can't exactly afford a genuine big bucks import Spider-Man figure and always wanted one for reference posing for drawings, and the one I got only cost me £15. Can't wait for it to arrive in a few weeks
@@ss-ls4icHello, Can you please specify what kind of tool did you use? I'm planning on using hot water too cuz I used heat gun then it almost melted...
@@RandomReview-pm7ru yeah prob gonna do that, the unmasked heads we're easier and i'm sorry if i annoyed you, i almost flooded the whole comment section with my questions
@@RandomReview-pm7ru Final update: So I tried hot water and it won't work and my mom offered me help so I have the head to her then she keeps prying the corners with a cutter (Note: The socket's position is deformed, it's like glued insife the head) then I helped her by exposing flashlight to the head then she keeps prying it for like an hour and she used cutter and flat screwdriver until it finally came off, Rn i'm just drying the mightyband and we will do the surprised head later since it exhausted my mom. And the flaw in my copy is that the socket is too deep in the head and it looks like it was glued so my mom pry the corners and yanked it out. Thank you RandomReview for helping/guiding me! 😀
Good afternoon, can you explain to me in the comment that you made so that I can do it, what happens is that I do not understand English and I am using a translator to write this message
i basically used a hair dryer on the head and use a small knife to remove the peg inside the head when u removed it u wanna put the peg back again but not all the way then if your good with it just glue the peg so it wouldn't move thats it and let the glue dry before putting it all back or else its gonna be stuck btw u can use glue gun too
@@RandomReview-pm7ru i did try but it won't budge, i don't wanna use much force since it might broke, maybe i'll try using hot water so it will become loose, will that work?
I'm gonna have to get back with you but if they're loose it's either because the joints are too thin or the legs themselves are too thick which will restrict articulation and you can thin them out with an exacto knife. I'd definitely just try to figure out what the restriction is
If you found this video helpful pls like and subscribe i would help me upload more content like this. Thanks!
I just bought this lol. Got a marvel legends across the spiderverse Miles from work and I'm pretty happy with it, mainly cause they're no good bootlegs of an import figure yet. But this will go nicely with that, Miles figure. The fact the only real problem with this Peter (other than the obvious minor paint issues) is that neck, and that it's such an easy fix is crazy. Definitely worth the effort in my eyes. I can't exactly afford a genuine big bucks import Spider-Man figure and always wanted one for reference posing for drawings, and the one I got only cost me £15. Can't wait for it to arrive in a few weeks
because of this video right here. im bout to buy the sentinel bootleg since my only concern about it is the short neck
U should also be concerned with the eyes but I have a mod for that
@@cmbricks3616 what's the mod?
@@cmbricks3616 yeah what is it?
@@zedbros14yt42paint ...
Just ordered I will use this video to help me make the neck longer. Thanks man you’re the one of the best RUclipsrs out there.
Thank you!
@@RandomReview-pm7ruyou welcome
i'll definitely do this mod when my bootleg comes in!!! Thank you for this video, this video deserves more attention
Recently just ordered mine helpful definitely 👍🏽 thanks
Thank you bro I have one coming soon and I was scared of the short neck but this really helps❤
thanks to you i could fox this, i think he is a cool figure for such a great price and your custom could help looks like a real Sentinel figure
Thanks for the tutoriol dood! Good thing I saw this before buying it!
Salamat sa tutorial boss, kakagawa ko lang at maganda talaga yung naging result.
welcome boss, altis ngayong may neck na sya haha
Damn! Thats good, does the articulations still the same after you modified it bro?
it has the same articulation in fact the articulation significantly increase
Bro do you have any social media accounts? If its okay with you can I see some photos of youre figure bro?
@@RandomReview-pm7rucan you see the neck peg hole from the back ?
@@hashimhussain8973 theres a little gap on the back tho
Bought this figure yesterday and today I'm watching this xD
Thankyou so much for the tutorial Sensei.
Nice galing 👏 try ko yan pag dumating ung sentinel peter b parker ko
Can u make a unboxing vid
I would like the vid and subbed
super thank you dude im falling love again with my peter b parker bootlegs haha
Hey can you please respond? I have a question
Does the socket loose or maybe broken when you do this method? After the method
I did this and it worked perfectly, thankssss
You need more subs for real man ❤
I'll do it when i got it! Thanks for the tutorial!, btw hot water will work too right? I lost my hair blower💀
yeah i think hot water would work
So did the hot water work?
@@pauluxperezalt9259 yeah i tried it but its hard to pull it out
@@ss-ls4icHello, Can you please specify what kind of tool did you use? I'm planning on using hot water too cuz I used heat gun then it almost melted...
@@hellothere-vx4bl i just put it on hot water then i grabbed a scissors to pull it out but be careful it barely broke the head
have one on the way and was worried about the nech so asoon as it gets here im modding the neck thanks bro
Tysm bro! XD
Does the figure feel like it’s fragile since it’s a bootleg?
Not really
I didn’t have a way to get the ori and I’m just a kid with no money so im probably gonna get the bootleg and mod it
This figure is worth your money bro
are u gonna do miles 😊
yeah i pre ordered it aldready im just gonna wait for it
thank you so much now im def buying it
THANK YOU SO MUCH!!!!
No problem
The figure looks so good except for the neck so I’m ganna do this
Any tips for removing the socket off the head quickly? I used heat gun for 3 seconds and it almost melted again 😭
bro at this point just use a hot water lol
@@RandomReview-pm7ru yeah prob gonna do that, the unmasked heads we're easier and i'm sorry if i annoyed you, i almost flooded the whole comment section with my questions
@@hellothere-vx4bl no worries bro i dont mind with all the questions i made this vid to help yall and to answer your question
@@RandomReview-pm7ru Final update: So I tried hot water and it won't work and my mom offered me help so I have the head to her then she keeps prying the corners with a cutter (Note: The socket's position is deformed, it's like glued insife the head) then I helped her by exposing flashlight to the head then she keeps prying it for like an hour and she used cutter and flat screwdriver until it finally came off, Rn i'm just drying the mightyband and we will do the surprised head later since it exhausted my mom. And the flaw in my copy is that the socket is too deep in the head and it looks like it was glued so my mom pry the corners and yanked it out. Thank you RandomReview for helping/guiding me! 😀
@@hellothere-vx4bl Yoo congrats dude hope you enjoy it!!
Will a heatgun work instead of a blow dryer
Will you try the miles bootleg?
probably yes when it arrived
Good afternoon, can you explain to me in the comment that you made so that I can do it, what happens is that I do not understand English and I am using a translator to write this message
i basically used a hair dryer on the head and use a small knife to remove the peg inside the head when u removed it u wanna put the peg back again but not all the way then if your good with it just glue the peg so it wouldn't move thats it and let the glue dry before putting it all back or else its gonna be stuck btw u can use glue gun too
How can you put the skinny torso in because when I put it it doesn’t work
Get the miles too man!
yeah i pre ordered it already im just gonna wait for it
I have been trying, but its so hard to get it out, any tips?
Thanks your amazing
Thanks!!
Bro do u think if a peg got stuck in the head do u have any tips on how to take it out?
Yeh i usually use plier to take it out
@@RandomReview-pm7ru ok thank u so much
@@cmbricks3616 no problem
do you think i could use hot water instead of a hairdryer?
I think so yeah u should try it
Yessss
No entendí nada pero gracias
Your amazing
Not really, But thanks!!
Yessssir!!!
Out of topic but is there any solutions to the waist? Mine arrived and I can't change stomach cuz it's stuck like it's glued
Have u tried using hair blower or putting it on hot water??
@@RandomReview-pm7ruI mean, it's removed but the ball thing is stuck 😭
@@hellothere-vx4bl try using pliers
@@RandomReview-pm7ru i did try but it won't budge, i don't wanna use much force since it might broke, maybe i'll try using hot water so it will become loose, will that work?
@@hellothere-vx4bl i personally don't have this on my copy but, you should try using hot water and try pulling it
Hi! Do you know how to remove the excess glue?
i didn't remove it because kt doesn't have a excess glue
@@RandomReview-pm7ru I mean I did your tutorial but got quite messy and I have excess glue on mine, am asking if you know how?
Can i use tamiya cement instead of super glue? I don't have super glue...
Idk if it would work i haven't tried tamiya cement before
@@RandomReview-pm7ru well then can i use elmer's glue for alternative then?
@@hellothere-vx4bl nah it wont stick, maybe try buying a hot glue
@@RandomReview-pm7ru oh, maybe i"ll just buy super glue or i wont just mod it cuz i will just break it 😭
Do you have idea how to make the legs to not fall off easily?
I'm gonna have to get back with you but if they're loose it's either because the joints are too thin or the legs themselves are too thick which will restrict articulation and you can thin them out with an exacto knife. I'd definitely just try to figure out what the restriction is
bro, what's a socket? i don't speak english very well cuz im brazilian, please explain
its kinda hard to explain but imma just send you the link
hobbylink.tv/how-to-soften-ball-and-socket-joints/
@@RandomReview-pm7ru thx, i understand now.
Ung pag balik poba ng peg isang push lang poba ng peg isang tulak lang poba? Thank you
ung ginawa ko unti uting ko siya tinulak kung saan ok syang tingnan
Try koto pero natatakot lang ako baka kasi masira ung pag ka mod ko😅😂
medyo nakakatakot din, basta po dahan dahan lng po pag imod nyo na po
Sir can i buy this copy of yours nalang? I cant do those mods ksi 😅
Sorry sir di ko po sya binebenta, pero kaya nyo yan boss ako nga wala din experience eh nagawa ko nmn po hehe
Amazing
Gracias hermano,cuando me llegue la figura lo probare,eres increible🫡
Gracias, saludos
Wait so put the super glue in first then put it?
Nah put the peg first before putting the super glue if u super glue it first u wont be able to fix it
@@RandomReview-pm7ru around the peg side
Put glue out side peg?
@@CHXLLEDITS yeah
@@RandomReview-pm7ru thx
I love you (no homo)
Can I use hot glue instead of super glue?
U can use hot glue just glue it before putting the socket joint back,i don't have glue stick thats why i used superglue
@@RandomReview-pm7ru alright thanks man you should get the miles bootleg too
@@supersanicstopmotions2379 yea im too broke lol maybe another time
do you recommend it?
yeah it looks much better than before and the articulation is basically the same
@@RandomReview-pm7ru :0
@@leothegamer9989 but yeah its up to you tho if you wanna mod it
Can hot water substitute?
i think so
@@RandomReview-pm7ru Alright thanks man. Just got my figure today and gonna do this mod tomorrow or sometime soon when I have time. You a legend man!
Sakto kararating lang nung akin
Uyy kuya pastyy big fan po ko sa mga vid nyo sa tiktok
Can you send the link plz
Ung sa knife poba pano po ung pagtanggal sa peg thank you!
Sa gilid ng peg nyo po tangalin po gamit ung knife
Pwede ba mighty ban pang glue dito
pwede po
Does the leg fall off easily?
in my copy nope it doesn't fall out easily
Pwede ba cutter dito?
Di ata kaya pag cutter masmaganda gumamit ka na lng po ng flat head screw
Where do I put the glue
inside the head
@@RandomReview-pm7ru before you put the socket in?
@@PaperMemersdepends if your using hot glue before putting the socket back, if your using super glue after u put the socket back
@@RandomReview-pm7ru so do I put the glue on the socket?
Also how long should I use the hair dryer
TYSM!
No problemo SpooderMan
diko kakayanin toh kinakabahan ako
Kaya yan pre haha
Could you do a mod on the socket that gets stuck from the big belly?
what do you mean??
@@RandomReview-pm7ru can i send you a photo on instagram?it's kinda hard to explain
@@Jimsanimetions sure whats your ig?
@@RandomReview-pm7ru jim._0_
@@Jimsanimetions yo i followed u accept it and chat me the problem
Do you think this neck mod is necessary? mine is coming in a few weeks so I wanna know
for me yes, if it dont really bothered you that much dont do it
@@RandomReview-pm7ru ok I’m gonna wait for mine to arrive if I see the problem I might do it
@@RandomReview-pm7ru I’m a little scared because I have no experience modding action figures