How to Remove / Detach a Stuck Front Wheel on a Uppababy Vista
HTML-код
- Опубликовано: 14 окт 2024
- To help support our work, for a personalized purchasing consultation, or to access our regularly updated 'Buyer's Guide’ and other exclusive content, please visit / thestrollerworkshop
PLEASE SUBSCRIBE! Subscribing helps preserve the longevity of our channel and ensures that we can continue to make helpful videos in the future.
In this video we demonstrate how to remove /disconnect / detach the front wheel of a Uppababy Vista from the chassis if it has become stuck / rusted in place.
As an independent, consumer-oriented reviewer, we are reliant on your contributions to pay the bills and remain operational. If you would like to help support our work, could use a personalized consultation, or think you might enjoy some additional exclusive content in the form of articles (mostly related to the ‘shadier’ side of the stroller industry), as well as access our regularly updated ‘Buyer’s Guide’ (which lists the models we recommend, as well as providing a lot of technical and lifestyle-related information), please visit our Patreon Page:
www.patreon.com/thestrollerworkshop
Thanks so much for your help!
Exactly what I needed. Thank you
Incredibly helpful. We bought our Vista secondhand, and I doubt that the front wheels had ever been removed. There is no way they were coming off without following every step in this video. Thanks a million.
This worked a treat. My pram is 6 years old, so it genuinely took 2 hours of aggressive hammering to get it out. Slapped on an o ring, and the wheels rarely wobble now.
Thanks so much for the video mate
@themelbournebeerrrview1395 been a while, I realize, but are we talking an o-ring snug to the shaft? Or like a seal big enough to seat on the bearing?
Hey mate, I put the ring snug on, which takes out the slack. Depends on the thickness of ring, but I then needed a bit of a squeeze putting the wheel back on to get the click
My wheel on my Vista was actually stuck on and I'm so glad that I saw your video and you explained it so well my wheel actually came out I did not use any grease I used a hammer and some screwdrivers and it came out smooth as ice it was so easy to get it out thank you for making videos like this I definitely will follow your channel for more
Thank you for your guidance. Save us a ton of time and hassle.
Thank you so much, this saved me a lot of money. I have subscribed.
Genius - thank you! Just the trick I needed. Thanks for taking the time to make the video.
The gray plastic caps keep popping off my stroller, do you have any suggestions? Thank you for all your extremely helpful videos!
So helpful, Thank you
Do you have any suggestions on where to buy replacement wheel bearings for the front wheels? Never bought bearings separately before, and having a hard time finding anything that matches the dimensions of the uppababy bearings.
Amazon. I plan to put up links eventually, but I don't know exactly when I'll get around to it. There's a little nr. somewhere on the bearing, and there's some company on Amazon that has a searchable database with thousands of sizes. Alternatively, take it to a skateboard shop. :)
Thx bro 🙏 I’m new to this
You're very welcome, glad it helped. :)
Do you have a video about fixing an uppababy vista brake pin?
Ooh there's a Canadian lady who dose a video. She sells the little springs that are normally the cause
Legends! Thankyou!!!
Hello! I hope you can help me..I tried your trick to remove the stuck wheel but it didn't come out fully, only like 80% and now I can't get it in or out, so can't use the pram.. any suggestions?
any further ideas on how to remove it if these methods don't work?! I've followed your video and done exactly as you show, but still have had no luck! please help!
Make sure you’re holding that dial in the open position and just hit it harder until it goes. Rust can be really tough sometimes :)
Wondering if you could help - I have a stuck front wheel that even with WD-40 and Rust-oleum, I cannot get this wheel off. I have been hammering and it will not move at all. I followed the same process outlined in the video and got the left wheel off. However, the right one shows no movement. Any advice? I was thinking - since I am going to replace the front wheels, is it reasonable to take titanium drill-bit and drill through them middle? Is that asking for trouble? Thanks so much.
It could damage the housing, both if the drill slips, but also if the metal heats up enough to melt /warp plastic elements. Still though, if you absolutely can't get it off, then you may not have many other choices that wouldn't also be risky. Uppababy is one of the better brands for getting ahold of spare parts though, so I would consider contacting a local distributor or their customer service (or search 'Uppababy HUB service center' and see if there is one close to you to contact) and ask the price for a new front-frame altogether, it might save you a lot of headaches. :)
I am in the exact same situation! Tried everything, one wheel came off, the other will not budge. My husband is thinking of trying this drilling technique. How did it work for you, Rich??
Hi. Do you know how to do this on a Bugaboo Buffalo 2016? I have a stuck right front wheel. Thank you, and regards
I have this one
Look like I will try to fix it
Where I can find the grey plastic cap? I lost mine.
contact Uppababy customer service directly :)
Does this work for the back wheels too?
They're not connected in the same manner, but the general idea is the same, lubrication (maybe even rust-removal agents) + making sure that the unlocking button is held in the unlocked position + work with tools to (in this case) pry them off.
@@BarnevognverkstedNo thank you - the hammer trick is what ended up working!