⚠ Pay your attention! ⚠ Video is outdated! ⚠ WATCH NEW VIDEO WITH DSG 7.02 ⚠ ✔ ruclips.net/video/JBNtHqSCzsc/видео.html Hello! Please follow our web-site contact form - kinergo.eu?SMM_and_all_sites&RUclips&DSG_7_error_ENG
HI KINERGO TECH...What programming procedures should be followed before removing mechantronic unit for this kit installation and what procedure should be followed after unit is reinstalled to gearbox?? Can you give a step by step info please....thanks in advance
No programming procedures are needed. Neither before dismantling, nor after. Only mechanic work to replace the accumulator. After replacing the hydraulic accumulator in the system, the working pressure is restored and the system immediately starts to operate normally.
Isnt it dangerous to remove the cylinder part? I heared that there are 250bars of pressure in it... it would be fatal to unscrew it under so much pressure
@@vorname2459 What if there us a crack, where the pressure is out partly.. lets say normaly it should have 250bars .. but it has "only" 140bar left... did you hear a tire explode? or can you Push the tire in with your thumb in? In a tire you have only about 2 to 3.5 bars.. what if you open tbe housing of the cylinder part and you get that 140bars or even more shooting out in worst case in your direction? Or it falls apart while you are removing it and fragments are flying towards you at a pressure if more than 100bars? Just telling you, because you could think, that everything is safe and you can remove everything without any danger and stuff :)
Hello. Please check this question with the manager. You can contact the manager via a chat on the website, through the FaceBook community, etc. Link to the website: kinergo.eu/
This kit works great with a broken side of the body. The set itself (its lower part) becomes this side, but now it is steel. Please, watch our new video about this set.
Usually there is no pressure and nothing flies out. BUT! You should always be careful and careful. There is a way to relieve pressure before disassembling - ask your mechanic for this.
The repair kit presented in the video is suitable for all DSG 7 DQ200. For more information about the product, see the product page or check with our sales managers. kinergo.eu/product/remkomplekt-dsg-7-02-dlya-remonta-mehatronika-dsg-7-dq200/
⚠ Pay your attention! ⚠ Video is outdated!
⚠ WATCH NEW VIDEO WITH DSG 7.02 ⚠
✔ ruclips.net/video/JBNtHqSCzsc/видео.html
Hello! Please follow our web-site contact form - kinergo.eu?SMM_and_all_sites&RUclips&DSG_7_error_ENG
HI KINERGO TECH...What programming procedures should be followed before removing mechantronic unit for this kit installation and what procedure should be followed after unit is reinstalled to gearbox?? Can you give a step by step info please....thanks in advance
No programming procedures are needed. Neither before dismantling, nor after. Only mechanic work to replace the accumulator. After replacing the hydraulic accumulator in the system, the working pressure is restored and the system immediately starts to operate normally.
hi , which oil you use for this valve body after repair ? , please advice thanks
Isnt it dangerous to remove the cylinder part? I heared that there are 250bars of pressure in it... it would be fatal to unscrew it under so much pressure
The reason to repair is that there isnt any preasure because it is broken, so what can happen?
@@vorname2459 What if there us a crack, where the pressure is out partly.. lets say normaly it should have 250bars .. but it has "only" 140bar left... did you hear a tire explode? or can you Push the tire in with your thumb in? In a tire you have only about 2 to 3.5 bars.. what if you open tbe housing of the cylinder part and you get that 140bars or even more shooting out in worst case in your direction? Or it falls apart while you are removing it and fragments are flying towards you at a pressure if more than 100bars?
Just telling you, because you could think, that everything is safe and you can remove everything without any danger and stuff :)
It is around 10-15bar of pressure when active.
So if ever there is a leak on the Mechatronic it is caused by failure around the accumulator area?
If ATF leaks on the valve body, then with a 80% probability this is a crack in the area of the accumulator mounting. The error code is P17BF.
Can I get this kit in South Africa or Botswana?
We ship to these countries, please, leave your contacts or write to us on sales@kinergo.eu
How much sir India delivery
Hello. Please check this question with the manager.
You can contact the manager via a chat on the website, through the FaceBook community, etc.
Link to the website:
kinergo.eu/
Hello.
This is same kit for dq200 dsg ?
The one wiht dual dry kluch?
yes!
@@KinergoEquipmentWhere can one purchase it and for how much?
Hi, whats the reason of the 3 holes you added?
Hi! These three holes are needed for ATF
this kit works if the body is broken? case 2 of the video. i have to weld it?
This kit works great with a broken side of the body. The set itself (its lower part) becomes this side, but now it is steel. Please, watch our new video about this set.
Hi do you provide repair facilities aswell in the uk as i have the same error
Hi! We will send a repair kit (hydroaccumulator) by mail. You can order an additional wrench. Installation can be done and without a special wrench.
Hi how do you remove the accumulator from housing with out popping out and flying
Usually there is no pressure and nothing flies out. BUT! You should always be careful and careful. There is a way to relieve pressure before disassembling - ask your mechanic for this.
@@KinergoEquipment if you know that way than please share it.
Is this the 0 clutch?
The repair kit presented in the video is suitable for all DSG 7 DQ200.
For more information about the product, see the product page or check with our sales managers.
kinergo.eu/product/remkomplekt-dsg-7-02-dlya-remonta-mehatronika-dsg-7-dq200/
Has anyone actually installed this kit? What kind of experiences have you had?
how can i order this repair kit ?
How much Is this?
Please look actual information on our web kinergo.eu/products/obgt/dsg-repair-kit-dsg-7-02/?clear_cache=Y
Hi
?Where i can buy these kit
Please, write us throw feedback form at
kinergo.eu/contact/
Hi how can I get this kit
Please, leave us your e-mail and our sales manager will send you all information!
Hi!How can i get the kit
enescuovidiu@yahoo.com
ovy2310 l-ai comandat? E bun?
@@Alexalex-oh6gw Da este ok
where can i buy this item?
Hello, Elis
you can ask our price list at our web-site kinergo.eu/contact.php
The price is secret (hiden for everyone) you can't find at homepage, nobody know... and maybe is close of half price of full aluminum body.
Hello. We provide the price on request.
To get the price, write to e-mail sales@kinergo.eu
I want to vehicle driving test but it isn't only repair...
Music?
Contact details where I can order one please
Hello! Please follow our web-site contact form - kinergo.eu