My VW Rabbit is twincharged. A roots-style blower that's driven by a second pully on the waterpump, coupled via a magnet clutch. The blower runs from 0-3500rpm while a second throttlebody opens at 2000rpm so that the turbo adds boost. Result is a 1.4L with 180hp at 6000rpm and max. torque of 180ft-lb spread over 1500-4500rpm. Certainly not a racecar, but makes for a great daily in a 2400lb car that gets 39 mpg.
Kyle Sonsalla I should clarify, im going off the assumption that since theres more availability for superchargers, theres probably a better horsepower candidate.
@@rustysausage69 It'll still look right about the same though... Using a TVS, a Whipple, a Procharger, and pick your flavor for turbos, it'll still end up like this test. Turbos walk away with it easily, all day long.
Awesome testing Sir. I have a Procharged corvette and a Boosted Lsx fox. The linear boost of the Centri makes the car a dream to drive and get traction.
Thank you so much for putting this video together, I have been going over and over in my head which way an upcoming engine build needs to go. I still have a hankering to do positive displacement down low, which cuts out and lets the turbos take over. Nearly got there once before the car I was doing it to got written off.
Great video again Richard, was a case of spending money where you don't need to with the vortec Haha. Just love turbo boost! One thing I like about turbo is you can drive off boost, putter around like a grandpa and get the corresponding economy then mash the loud pedal for that overtaking power you need.
Absolutely amazing video. The extreme hard work, time, and dedication to create this knowledgeable video is a true treasure. Thank you for creating this
Love your videos! Man you spend a lot of time to do these comparison tests, and we appreciate that. .... Good info and questions answered that probably would never have been answered otherwise...thank you Richard!
Considering the Eaton is thought of as bottom of the barrel. It was impressive. I was expecting the twin screw to match the Eaton's low end torque and pull away at the top. But it performed more like a centrifugal
Alot of the large twin screws are like that. A tvs makes more power and torque everywhere and is just as nasty on the hit as the tiny stock blower actually nastier because it has way more torque lol.
Terrific content once again. Clearly compressor efficiency and parasitic loss play a huge role in the differences between these setups (as well as correct sizing - a bigger Eaton probably would've helped top end - probably). But one thing I would love to see is a comparison of discharge and post intercooler intake temps. Particularly with the superchargers which are all using the same intercooler brick in this case. This would provide some nice insight into relative compressor efficiency. Oh, and next time you test turbos, how about doing several different sweep rates on the dyno to simulate different on road conditions? Anyone who's driven a turbo car knows that 5th gear boost response is a lot different than 1st gear due to the relationship between engine acceleration rate and time to boost for the turbo.
deez nuts keep it low I boosted my mach and the engine blew keep it around 450-480whp Now I have a forged bottom end If you wanted to keep it safe on the cheap you could pick up some boss rods and you’d be safe to 600
THE best forced induction comparison vid I've seen! A single turbo setup on the list would have been very interesting. I'm hoping you'll do a single versus twin comparison soon 👊👍
Where are you even going to find them? I would way rather see a Gen3 Hemi pulled from A truck and freshened up with bigger ring gap and twist the screws on a turbo to see what actually breaks and where. The 5.7l has a bit of a reputation for cracking pistons and I have a feeling that Richard can pull some wizardry on it. Any of the old school big blocks basically cannot hold a candle to any newer engine. The RV versions as opposed to performance versions are even more sad. Most of them are under 250hp and had less than 9:1 compression and terrible heads. There is almost no point in using one unless you have a car it fits, and even then the top of the engine ends up in the bin as the head, intake, exhaust manifolds, carb, ignition, camshaft and the rest of the valvetrain is an incumberance to using all those cubic inches. It might be different if you could pull an engine out of a truck or RV for $500 and walk across the yard to a car and pull the heads and intake off for another $400, throw some headers on it and for under $3k have some action but now even crap '60s iron big block heads cost more than the Chinese aluminium castings that summit racing will FedEx to your front door. When is the last time you went to a junkyard and there was more than 2 forged crank 440s there?
@Joe Paul like i said.. GL with your $1000 turbocharged intercooled LS build! Maybe you'll get lucky and have $300-400 left over for a nitrous kit and a fully built trans and rear end while you're at it.
@Joe Paul i think it would be well worth while to get in touch with someone who's done a turbo LS and see if they can give you some insight into what it ended up costing all up. I'd agree that the LS platform is relatively inexpensive in terms of horsepower per dollar, and difficult to beat. but i also know for a fact that $1000 won't go very far.
You are creating awesome content with all these tests... especially with the different FI options. There are many engine families out there with lots of them sitting in junk yards lol. Great job Richard, we all keep looking forward to new tests🤘
1 person doesn't like ANY kind of boost 🤦🏻♂️🤣 Probably he's running a carburator on a SBC and keep telling his friends that he's almost done with his "mad 350hp build" 🤣
I remember a time when 350hp was something to be proud of. Wasn't this millennium, wasn't even in the last few decades of the last one, but I do remember a time. 350hp was a mad build :D
@@kylemilligan752 don't knock the double hump fuelies. Mate of mine bought a set off the local engine shop that they used on their race car. Cost him about $2,500 probably getting on for 35 years ago. That was a fortune back then. Very few people owned Chev engines back then, let alone have a trick high hp engine :D
Richard, I remember reading about "the flying brick" back in the 90's. I still have an 80 Mercury Capri thats been sitting in storage since '99. Someday, I'll dig it out. Thank you for doing so many side by side, apples to apples comparisons, on so many engines. Keep up the good work!
Yes I would do this with LS motors, but I’d add an extra twist too it! I would do exactly what you did in the test, then I’d add a test where you actually over rev the engine, to see how the power curves hold up, just so we can see how long that centrifugal super charger can keep making power, and also see how fast the roots and twin screw fall off. Then take a power average from the lower revving test, and one from the over revving test! It’s a lot of time and testing, but I think it would answer a lot of questions, and people will love it
@@IAmMrTrumpet But if it gets the same results on a 1.6 b series, a 302 windsor, and a 4.6 cobra, what's the point of doing a 5.3 LS? The dead horse has already been beat.
Great video of information nobody else has ever posted. It would be great to see to centrifugal blowers maxed out. They have some very interesting characteristics when run there.
Thanks for all the hard work you put in Rich poor people like me can't afford stuff like that but just as astonishing to me was the fact that this video had no commercials😁😁😁😁😁
Hey Richard. You need to write a book. How to Tune your F.I. Engine for Beginners . I bet you'll sell a ton. I would definitely buy a few. One for me and the others would be GIFTS.
@@mickeymang6 power would be similar but on less boost because it has more displacement, headflow, rpm, compression and tech (vct). These older 4v motors made better torque than coyotes with similar setups. The vct helps alot with that though.
Great video, very informative! I'm interested in the B16 comparisons, but since there isn't a twin-screw SC for it, would you be interested in trying it with a K20/K24 or BRZ's FA20/4U-GSE engine? Supercharging, especially twin-screw or roots, is usually applied on big displacement engines, so it'll be interesting too see a test done with a small 4-cylinder engine.
How about doing an LSA supercharger test on different displacement LS engines like 4.8, 5.3 ,6.0 , 6.2 but with the same pulley size and see how the boost varies and power level varies
The modern 2650 Eaton is a whole different animal. In the old days when the Eaton was under 2 liters and inefficient the twin screws were more "efficient" and the twin screw guys still hang on to that to this day and they think their twin screw is "more efficient" than the 2650s but liter for liter it is the exact opposite. That is exactly why you dont see 2.65 liter whipple and kb coming out even though there is a demand for smaller blowers all the stock motor and even some built motor guys south of 1000-1200 whp like to run them. Why is that you say? Because at 2.65 liters neither whipple or kb would be able to match the Tvs 2650, despite being "more efficient" (according to the twin screw guys anyways lol). That is a 20 year old way of thinking and is no longer true. Displacement for displacement the Tvs is king. Only way a twin screw matches or exceeds it is with a lot more displacement
The twin screw seems really nice for engines running into the 3500-6500rpm, was hoping to see all four choices compared to each other some day finally its happening, thanks for the video.
Awesome videos, look forward to each new one like I was waiting for next month's hot rod addition back in the day before internet. I would love to see some comparisons between junk yard turbos off of diesels used on gas engines.
Well I don't wanna sound so demanding but YES PLEASE!! Make a LS video with these applications lol. Im planning a LS swap on my 96 mustang GT and a friend of mine suggested I check out your videos and boy was I'm not disappointed. I'm pretty picky when it comes to subscribing to channels. You are one of the few channels out there that stick to the narrative.I'm not knocking all the other channels out there but I'm just not into their personal lives I basically look at thier videos just for the car stuff and fast forward the rest. I don't have to fast forward through your videos like I have to do theirs. You are full of good info and I think I speak for all the other fans out there keep up the good work and God bless.
It would be really sweet if you could compare brands of positive displacement superchargers like the new tvs, 5.0 3l whipple and kenne bell to show the different boost curves and efficiency ranges they make!
Love all the information keep it up. I would like to see how compression ratios affect boost maybe if it changes the percentage of increase of horsepower according to what compression ratio is being run. Just something I've been thinking about.
I'd love to see that as well. As someone who came from 4 banger turbo imports to learning V8s that's the question that always lingers in my head. Seems the v8 guys leave the higher compression pistons the way they are when boosting but in the 4 cylinder world where 25+psi is normal they always seem to want compression more towards 8:1 as to cram more air/fuel in there and run more timing without detonation.
Need to see this exact type of test on a Mustang GT (18- 22) 5.0 L Coyote! That would be awesome & much needed especially cause it’s a very common build. Thank you!
Great work again Richard, really interesting to see the effect of the long runner length, very surprising to see that much difference on a SC application, NA I would understand, but SC, that really surprised me. Keep up the great work.
Great video, a real eye opener.Can't wait to see all your videos. I have so many more questions on different engine types, 2 or 4 valve, lobe centers etc. Hows your original 5.0 coupe running, could you do a quick video her?
Awesome 👍. I won’t worry about doing it on an LS motor too. However it would be cool to see a torque cam vs PDB cam vs centrifugal cam vs turbo cam vs NA. And just see how the power curves are different 🙂
Great test and some very good points. Just one question, could you have used the air to air intercooler with the centrifugal supercharger and the decent intake runners?
Just loved this... we've run them all over the years and honestly on a car that deals with High RPM 90% of the time the ProCharger is the poop... nice to see it confirmed ( we're not allowed to run EFI in our form of racing so ... Turbo's aren't always the answer )
Lots of time and effort put in to these tests and he is posting videos so often. Thanks Richard.
@@8SecSleeper And? Still a lot of work put into making these vids regardless of how long ago they were shot
U
The best engine channel on youtube.
by far! I don't deserve this.
We should start by thanking the guy !!!you could only imagine the amount of work that went into this for us to watch a short vid
Work? All I saw was a bunch of fun!
it wasnt done for the video he us to write for magazines
This vid is 4 years old, and is still probably one of the best comparisons out there. Thanks for the amount of work you put into these!
The tests were actually done 2005-06 ish in Muscle Mustangs and Fast Ford's mag.
OMG Richard that was a ton of work!! Much appreciated Sir!!!
Hands down best channel on RUclips!
Great test, so incredibly happy to see you test with something other than an LS this time. Much appreciated.
Your channel is a great place for gearheads that arent fanboys. Great job!
Thank you man Ford guys everywhere appreciates you keep it up
My VW Rabbit is twincharged. A roots-style blower that's driven by a second pully on the waterpump, coupled via a magnet clutch. The blower runs from 0-3500rpm while a second throttlebody opens at 2000rpm so that the turbo adds boost. Result is a 1.4L with 180hp at 6000rpm and max. torque of 180ft-lb spread over 1500-4500rpm. Certainly not a racecar, but makes for a great daily in a 2400lb car that gets 39 mpg.
that is awesome-Lancia Delta Integrale S4
Oh yeah!! OG 5.0 Lets See It!!
Yes!...to running this on an LS test.
Agreed, theres far better supercharger technology available for all LS than early MOD.
The best part of this test was the fact that it wasn't an LS for once.
@@rustysausage69
What better technology? Pretty much all the centrifugal, PD, and turbo's are available for both families....
Kyle Sonsalla I should clarify, im going off the assumption that since theres more availability for superchargers, theres probably a better horsepower candidate.
@@rustysausage69
It'll still look right about the same though... Using a TVS, a Whipple, a Procharger, and pick your flavor for turbos, it'll still end up like this test. Turbos walk away with it easily, all day long.
Awesome testing Sir. I have a Procharged corvette and a Boosted Lsx fox. The linear boost of the Centri makes the car a dream to drive and get traction.
Extremely impressed with the performance of the 2001 cobra manifold 👍👍
Thank you so much for putting this video together, I have been going over and over in my head which way an upcoming engine build needs to go. I still have a hankering to do positive displacement down low, which cuts out and lets the turbos take over. Nearly got there once before the car I was doing it to got written off.
Awesome stuff Richard!
Excellent video, your hard work has shown through on this video, just as the other I've seen of yours!
More amazing tech sharing here -- THANK YOU RICHARD!!
YES! This test with a 6.2 LS3/L99! Thanks for all the great content bud! One of my favorite informational channels on the tube!
Richard knocks it outa the park again with his tests, keep it up mate, your doing some awesome work.
Great video again Richard, was a case of spending money where you don't need to with the vortec Haha.
Just love turbo boost!
One thing I like about turbo is you can drive off boost, putter around like a grandpa and get the corresponding economy then mash the loud pedal for that overtaking power you need.
Absolutely amazing video. The extreme hard work, time, and dedication to create this knowledgeable video is a true treasure. Thank you for creating this
Vortec missed the ball on that plenum design but curve gets my brain wondering what's beyond! Lol. Great work Rich!
I watched this one again . I like these videos 📹 👍Thanks Richard 😊
Glad you enjoyed it
Love your videos!
Man you spend a lot of time to do these comparison tests, and we appreciate that.
.... Good info and questions answered that probably would never have been answered otherwise...thank you Richard!
Considering the Eaton is thought of as bottom of the barrel. It was impressive. I was expecting the twin screw to match the Eaton's low end torque and pull away at the top. But it performed more like a centrifugal
Alot of the large twin screws are like that. A tvs makes more power and torque everywhere and is just as nasty on the hit as the tiny stock blower actually nastier because it has way more torque lol.
Terrific content once again. Clearly compressor efficiency and parasitic loss play a huge role in the differences between these setups (as well as correct sizing - a bigger Eaton probably would've helped top end - probably). But one thing I would love to see is a comparison of discharge and post intercooler intake temps. Particularly with the superchargers which are all using the same intercooler brick in this case. This would provide some nice insight into relative compressor efficiency.
Oh, and next time you test turbos, how about doing several different sweep rates on the dyno to simulate different on road conditions? Anyone who's driven a turbo car knows that 5th gear boost response is a lot different than 1st gear due to the relationship between engine acceleration rate and time to boost for the turbo.
Ill check to see if I got pre cooler temps
My prayers have been answered! Looking at boosting my mach 1.
deez nuts keep it low I boosted my mach and the engine blew keep it around 450-480whp
Now I have a forged bottom end
If you wanted to keep it safe on the cheap you could pick up some boss rods and you’d be safe to 600
I'm so happy I found this channel 💯😃
Great information!
THE best forced induction comparison vid I've seen! A single turbo setup on the list would have been very interesting. I'm hoping you'll do a single versus twin comparison soon 👊👍
Great video! Thanks for taking the time to make this.
Richard you are awesome for doing these videos. Thank you.
Holy Fork it wasn't an LS!!!
Love the content as always
Hey lets do a big bang shootout with RV 440, 454, and 460!!!
Where are you even going to find them? I would way rather see a Gen3 Hemi pulled from A truck and freshened up with bigger ring gap and twist the screws on a turbo to see what actually breaks and where. The 5.7l has a bit of a reputation for cracking pistons and I have a feeling that Richard can pull some wizardry on it. Any of the old school big blocks basically cannot hold a candle to any newer engine. The RV versions as opposed to performance versions are even more sad. Most of them are under 250hp and had less than 9:1 compression and terrible heads. There is almost no point in using one unless you have a car it fits, and even then the top of the engine ends up in the bin as the head, intake, exhaust manifolds, carb, ignition, camshaft and the rest of the valvetrain is an incumberance to using all those cubic inches. It might be different if you could pull an engine out of a truck or RV for $500 and walk across the yard to a car and pull the heads and intake off for another $400, throw some headers on it and for under $3k have some action but now even crap '60s iron big block heads cost more than the Chinese aluminium castings that summit racing will FedEx to your front door. When is the last time you went to a junkyard and there was more than 2 forged crank 440s there?
@Joe Paul definitely youshould try to do that for 1k, let me know how that goes for you!
@Joe Paul like i said.. GL with your $1000 turbocharged intercooled LS build! Maybe you'll get lucky and have $300-400 left over for a nitrous kit and a fully built trans and rear end while you're at it.
@Joe Paul i think it would be well worth while to get in touch with someone who's done a turbo LS and see if they can give you some insight into what it ended up costing all up. I'd agree that the LS platform is relatively inexpensive in terms of horsepower per dollar, and difficult to beat. but i also know for a fact that $1000 won't go very far.
You are creating awesome content with all these tests... especially with the different FI options. There are many engine families out there with lots of them sitting in junk yards lol. Great job Richard, we all keep looking forward to new tests🤘
Now I know, twin turbos, inter cooler, & some nos on the 5.4 for the horse, informed decisions, your the engine guru Richie,thank you My friend 🙏
Sounds like a perfect series for the big bang big block!
Yes yes yes you are the man richard
Awesome work, yet again Holdener! Thanx for what you do!
1 person doesn't like ANY kind of boost 🤦🏻♂️🤣 Probably he's running a carburator on a SBC and keep telling his friends that he's almost done with his "mad 350hp build" 🤣
noname_RU still gets to and from cars and coffee lol
I remember a time when 350hp was something to be proud of. Wasn't this millennium, wasn't even in the last few decades of the last one, but I do remember a time. 350hp was a mad build :D
Oh but no, the car show carb sbc guys with camelhump heads all have 500hp 😁
@@kylemilligan752 don't knock the double hump fuelies. Mate of mine bought a set off the local engine shop that they used on their race car. Cost him about $2,500 probably getting on for 35 years ago. That was a fortune back then. Very few people owned Chev engines back then, let alone have a trick high hp engine :D
Not talking about real racers. Specifically the car show dolts.
Yes please do the same test on a 5.3 or 6.0 LS ... I’d love to see the numbers👍
Richard, I remember reading about "the flying brick" back in the 90's. I still have an 80 Mercury Capri thats been sitting in storage since '99. Someday, I'll dig it out. Thank you for doing so many side by side, apples to apples comparisons, on so many engines. Keep up the good work!
Love the mod motor content, so tired of LS everything. With the kenne bell twin screw, was it the hot box 2.2?
Richard your videos are getting better and better
Yes I would do this with LS motors, but I’d add an extra twist too it! I would do exactly what you did in the test, then I’d add a test where you actually over rev the engine, to see how the power curves hold up, just so we can see how long that centrifugal super charger can keep making power, and also see how fast the roots and twin screw fall off. Then take a power average from the lower revving test, and one from the over revving test! It’s a lot of time and testing, but I think it would answer a lot of questions, and people will love it
I’m glad your videos came up on my recommended. So much good info and this channel is gonna become very popular very soon
You’re the man.. I’m sure everyone would love to see this test on a good ol 5.3 as well!
Literally nothing will change. He talked about that in the beginning of the episode.
Colton Robinson I mean.. I’ll quote him if you want... “Let me know if you guys want to see this applied to a different engine family”.
that answer is ALWAYS YES
@@IAmMrTrumpet
But if it gets the same results on a 1.6 b series, a 302 windsor, and a 4.6 cobra, what's the point of doing a 5.3 LS? The dead horse has already been beat.
Still nice to see
Here it is !!! Greatly appreciated!! Thanks for sharing all the knowledge from your testing
Great video of information nobody else has ever posted. It would be great to see to centrifugal blowers maxed out. They have some very interesting characteristics when run there.
Thanks for all the hard work you put in Rich poor people like me can't afford stuff like that but just as astonishing to me was the fact that this video had no commercials😁😁😁😁😁
It better have commercials or I won't make my $3
Amazing work. Thankyou.
Oh and the word you're looking for re: Intake swap is "Serendipity".
Great video and always Informative Richard.
Hey Richard. You need to write a book. How to Tune your F.I. Engine for Beginners . I bet you'll sell a ton. I would definitely buy a few. One for me and the others would be GIFTS.
I have been a hot rodder all my life, but i must say you've taught me more about boost then i thought I would ever know
Would love to see this comparison on a 11-19 Coyote 5.0
Basically multiply everything by 1.5
@@mickeymang6 power would be similar but on less boost because it has more displacement, headflow, rpm, compression and tech (vct). These older 4v motors made better torque than coyotes with similar setups. The vct helps alot with that though.
Once again awesome video Richard!!!!!
Thanx for the reviews on these tests
Great video, very informative! I'm interested in the B16 comparisons, but since there isn't a twin-screw SC for it, would you be interested in trying it with a K20/K24 or BRZ's FA20/4U-GSE engine? Supercharging, especially twin-screw or roots, is usually applied on big displacement engines, so it'll be interesting too see a test done with a small 4-cylinder engine.
How about doing an LSA supercharger test on different displacement LS engines like 4.8, 5.3 ,6.0 , 6.2 but with the same pulley size and see how the boost varies and power level varies
This is work he did in the pass
That would be an interesting test! But its almost unnecessary. Use the boost formula and you'll have all the info you need.
Real research. Real helpful. Thanks!
would be keen to see a comparison of modern Eaton like the TVS2650 and something like a Whipple.
Me too been in some of those cars goddamn they move
The modern 2650 Eaton is a whole different animal. In the old days when the Eaton was under 2 liters and inefficient the twin screws were more "efficient" and the twin screw guys still hang on to that to this day and they think their twin screw is "more efficient" than the 2650s but liter for liter it is the exact opposite. That is exactly why you dont see 2.65 liter whipple and kb coming out even though there is a demand for smaller blowers all the stock motor and even some built motor guys south of 1000-1200 whp like to run them. Why is that you say? Because at 2.65 liters neither whipple or kb would be able to match the Tvs 2650, despite being "more efficient" (according to the twin screw guys anyways lol). That is a 20 year old way of thinking and is no longer true. Displacement for displacement the Tvs is king. Only way a twin screw matches or exceeds it is with a lot more displacement
You should have three times the amount of subscribers with your wealth of knowledge that you offer all of us.
I love these tests! Laying down the facts and numbers. All this information for free? Awesome!
The twin screw seems really nice for engines running into the 3500-6500rpm, was hoping to see all four choices compared to each other some day finally its happening, thanks for the video.
You can really pulley up the roots blowers with big crank pulleys and lower your rev limiter to see good torque gains.
@@madmodgood idea didn’t think of that. What about dropping the rear gear a little to keep some top end?
@@TheJMan1K Rear end gearing definitely plays a huge role with blower cars.
Can’t thank you enough for all the knowledge!!!!
Richard, you’re killing it - such amazing videos and knowledge!
Good info.....and not on an LS!
Turbo ALWAYS wins for me ! Great video !
Awesome videos, look forward to each new one like I was waiting for next month's hot rod addition back in the day before internet. I would love to see some comparisons between junk yard turbos off of diesels used on gas engines.
Well I don't wanna sound so demanding but YES PLEASE!! Make a LS video with these applications lol. Im planning a LS swap on my 96 mustang GT and a friend of mine suggested I check out your videos and boy was I'm not disappointed. I'm pretty picky when it comes to subscribing to channels. You are one of the few channels out there that stick to the narrative.I'm not knocking all the other channels out there but I'm just not into their personal lives I basically look at thier videos just for the car stuff and fast forward the rest. I don't have to fast forward through your videos like I have to do theirs. You are full of good info and I think I speak for all the other fans out there keep up the good work and God bless.
As many other's have commented also, thank you for this!
Thank you for this episode, but can you try this combination on LS please.
Thank you Richard . These videos are simply amazing. Can you show us some of your rides if that’s not to much to ask .
It would be really sweet if you could compare brands of positive displacement superchargers like the new tvs, 5.0 3l whipple and kenne bell to show the different boost curves and efficiency ranges they make!
Love all the information keep it up. I would like to see how compression ratios affect boost maybe if it changes the percentage of increase of horsepower according to what compression ratio is being run. Just something I've been thinking about.
William Anderson compression is good
I'd love to see that as well. As someone who came from 4 banger turbo imports to learning V8s that's the question that always lingers in my head. Seems the v8 guys leave the higher compression pistons the way they are when boosting but in the 4 cylinder world where 25+psi is normal they always seem to want compression more towards 8:1 as to cram more air/fuel in there and run more timing without detonation.
Need to see this exact type of test on a Mustang GT (18- 22) 5.0 L Coyote! That would be awesome & much needed especially cause it’s a very common build. Thank you!
Nice to see you use a 4v engine finally. Can you make a video on how to degree custom 4v cams?
Awesome video!!! Next time, could you compare turbo to centrifugal supercharger with the same intake and same intercooler?
Great work again Richard, really interesting to see the effect of the long runner length, very surprising to see that much difference on a SC application, NA I would understand, but SC, that really surprised me. Keep up the great work.
Great test. I love my Procharger.
You also removed restriction when you removed the intercooler/intake setup, so it also flowed more cfm.
Richard...YOU ARE A BEAST !!!!
Great video and very informative! And thanks for the props to Corky Bell! Great man and still kickin' the hp!
awesome content. Richard is a pioneer!!! would love to see this work on a stroker combo?
Amazing video!! As always top notch testing. I'd love to see ls stuff but I would think this is still an apples to apples test regardless of engine.
Great video, a real eye opener.Can't wait to see all your videos. I have so many more questions on different engine types, 2 or 4 valve, lobe centers etc. Hows your original 5.0 coupe running, could you do a quick video her?
This information is Priceless, no one would really do this kinda of test in the real world.. awesome video 👍🏻 Thank you
Wow! Thorough, comprehensive, detailed, interesting... AMAZING ZING ZING ZING!!!
Super awesome vid man!!! Love it!
Awesome 👍. I won’t worry about doing it on an LS motor too. However it would be cool to see a torque cam vs PDB cam vs centrifugal cam vs turbo cam vs NA. And just see how the power curves are different 🙂
Great video and makes my choice the Eaton because of low end torque at low rpm where I need it on my truck for pulling.
04 Cobra Owner, great video!!!
Great test and some very good points. Just one question, could you have used the air to air intercooler with the centrifugal supercharger and the decent intake runners?
Thanks for the videos Richard!
So much good info, and tons of hard work. Thanks!
Wish I saw more compound boost setups. Turbos feeding super chargers.
Yes To the LS test. Please. Love watching your videos. I've learned a lot from watching them.
Loving this stuff Richard! Keep it up!
Just loved this... we've run them all over the years and honestly on a car that deals with High RPM 90% of the time the ProCharger is the poop... nice to see it confirmed ( we're not allowed to run EFI in our form of racing so ... Turbo's aren't always the answer )
Thanks for this Man !!
A true Albert Einstein in our time 😊