3D Printing Wood - Is It Any Good?
HTML-код
- Опубликовано: 26 окт 2024
- In this episode I tried out wooden filament and I´m pleased with the result. It came out really good. The wooden filament I used is unbranded - or branded with a Swedish Local Store - Clas Ohlson. I´ll leave a link down below.
3D printed headphone stand - www.thingivers...
3D printed bowl - www.thingivers...
Other videos I´ve made on 3D printing:
3D Printing Superman with my face: • I 3D printed Superman ...
3D Printing Yourself - Full Size Head Print: • 3D Printing Yourself -...
Things I used:
CR10S Printer - geni.us/LF6VeB (Amazon)
Light Walnut Varnish - geni.us/yEVoK8 (Amazon)
Dark Mahogany Varnish - geni.us/Vbwz (Amazon)
Wooden Filament - www.clasohlson...
SOCIAL:
Instagram: / theswedishmaker
Facebook: / theswedishmaker
Website: theswedishmaker...
#3D-Printing #Wood filament
I don’t know how far the camera was set up but I just knew he could reach it.
Thanks for this. I just bought a roll of the Clas Ohlson wood PLA, so I’m glad to know it works well!
I've done a lot of woodworking in the past but haven't gotten into using wood filament with my 3d printer yet. I love the way the bowl turned out. Great video!
Thanks a lot! I guess the only issue is to find out what to use it for :)
How long would something like this take to make by hand? Be interesting to see if a skilled woodworker could make this faster than a 3d printer. I was thinking of buying a 3d printer but would also be nice to be able to make things without needing a machine.
Great harmonic and soothing video, I've subbed for more content like this :)
This is the first time I see varnish used with wood filaments and you inspired me to try it out as well. Thank you and keep on making videos (y).
Thanks alot! Hope it comes out good!
So its been a couple of years since this video went up- how are they working now? Any breaks, chips, wear/tear, etc? I'm genuinely curious how well wood PLAs hold up over time. Loved your video!
It actually broke a while back when my daugther dropped it on the floor. A little piece came of from the top part. Other than that it held up really good. Thanks!
Vad kul att Clas Ohlson säljer 3D print grejer! Världen förändrades mycket jämfört med när jag var i Sverige för 6 år sen.
The staining really makes these look great!
Yeah it really does the trick!
The background track that you would normally hear while watching some artisan luthier build something magical made me chuckle. Dude, you pressed a button.
How long after the stain did you wait to do the clear coat?
Stunning piece and a great video! What 3d printer and setup do you have? Is it holding up over time with wood printing?
Hej!
Ricard, Gränna här. Är sen på bollen med 3D-printning men älskade stativet för hörlurar. Såg inte vad din kanal hette men hajade till när du använde bets (pulver). Hade varit fint att få lite tips på vad du tycker är bra träfilament nu några år senare? Samma? Hoppas du svarar. Ser att du har många följare. Kul!
Hej! Kul att du hittade till kanalen. Tyvärr har jag faktiskt inte testat några andra träfilament sedan dess. Utbudet nu är väldigt mycket större än då och det borde ha hänt en del med den typen av filament.
@@TheSwedishMaker Jag får kolla vidare. Kul. Så vad handlar kanalen om nu? Är det mer blandat eller är du inriktat på något särskilt?
@@Hulteke Ja det är blandat snickeri, 3d-printing, läder - allt som man kan göra grejer av :)
May I ask what temps you printed it in? I have the same from Classe and it does not work out good for my, dont stick to the bed (glassbed)
It was unfortunately to long ago so I cant really remember. I think I followed the temps that were on the PLA box it came in.
I've been semi satisfied with the Clas Ohlson filaments so far, but they just recently stopped accepting cash as a payment so that's a bummer. Thanks for the video. Cheers from Finland
cheers! I also think there are better options out there.
I find I have to use wood filler a lot because this filament for some reason doesn’t always finish printing. For example my last print completely missed the top layers so I can see infill . I have read to try a 0.5mm nozzle instead of 0.4 or lower so I’ll try it
Hur lång tid tog det att printa hörlursstället?
Super cool, purchasing a 3D printer very soon. One question though, is it expensive to print out stuff like this? how much do you estimate it costed you to print both of these items? thanks.
To print smaller stuff like this it isn't very expensive. A roll of filament is around 20 dollars (here in Sweden at least). And a spool is often around 350meters. And my guess is that the headphone stand is about 15-20 meters.
Hi, could you tell me how much time you spend to print this bowl?
Sorry, cant remember. But it should take around 4 hours I guess
Did you try sanding these first? I would be interested in the difference
Yeah I sanded them a bit and it worked fine. I didnt use any filler though
Hello the swedish Maker. i want to ask you about this video. I like to do woodcarving. And for some pieces of wood carv of some furniture i repair.... I was thinking in a wood filament 3D printer. I do not know if all 3D printers can print with this filament, of if the final texture, is very similar like wood. I need to be the SAME texture, almost like originals, The color or the other characteristics can me manage. I ask you, because if you have a small piece to repair, and is the part is a elaborated carved, sometimes could be less complex, scan, correct with a software like solid works or similar (i do not know...i use it for other things this software -for mechanicals parts-), and then 3d printed, than give the final touchs by hand.
Well. for the final, thanks for the video, is very instructive. As must be.
Hi! I wouldn't say you can achieve the wood texture.
Looks great. FDM really lends itself to the wood look.
Thanks! Yeah it sure does!
Riktigt snyggt! Var osäker på om Clas Ohlsons filament skulle funka bra men detta kör jag på! Kommer du ihåg vad du hade för print-temperatur och munstyckesstorlek?
Fick bli en prenumeration!
Hej! och Tack! Classes filament fortsätter att förvåna :) Print-tempen var nog lite lägre än vanligt om jag inte missminner mig. Jag tror att jag hade den på 190 och med 0,4mm
@@TheSwedishMaker Okej, tack så mycket! Detta ska bli kul att testa!
nice presentation style. thanks
what's the background music piece ?
Both songs are from Musicbed. It´s With Love by Analog Heart and in the end it´s Soaring with Airplanes.
Excellent!!!! Great video! Wow!
Nice
This wood PLA clogs more then fat chicks after Taco Bell
500$ wood filament, why?
Mitnichten the headphones? :)
Its not $500 it's 249 sweedish kroner which is $28
Sorry I don't speak pewdiepie
....no✋🏻