Hello guys, unfortunately for me it’s not enough, I can’t use this beauty anymore on airports like KBOS or CYUL… 😢it’s perfect on Cruz but departures and arrivals on « demanding » airports it’s not as smooth as pmdg for exemple…
He didn't call anyone that! He expressed his frustration after a series of basic mistakes made by other pilots. The pilots connect with VATSIM without any preparation. There are tons of materials on official VATSIM's websites that you need to kindly read and understand. If you don't want to, connect to mutiplayer, not VATSIM.
@@DiamondAviator I feel like, unfortunately most of this community is like that… Everything MUST be deadass realistic and following every real life procedure…They don’t get, that there are still people learning!
He didn't say anything wrong, just that he felt like it was one of those noob days. There is absolutely nothing wrong with that. Let's not forget that Vatsim is a network that is intended to simulate real airspace. As realistic as possible. If someone is not determined enough to read the rules and devote some time to learning, they can always fly in multiplayer mode or use one of the Atc programs, and not necessarily fly on Vatsim. For such people, I recommend, for example, the upcoming Beyond Atc.
I love the little details - the way the cargo doors "bounce" when reaching top of travel as an example. Question - when you set flaps 1 in the MCDU, you didn't set "DN0.3" - is that not required?
The PITCH TRIM / MCDU / CG DISAGREE caution is raised when one of the three Trim setting are more than 1.3 degrees of the other. These are the physical Trim and Trim Wheel position, the computed THS from the INIT B weights after engine start (as it uses CG and not ZFWCG), and the PERF TAKE OFF THS field. I couldn't find any info for when it's not set, I assume it should autotrim according to the INIT B data. It is just a method for double checking data. Anyways the UPx.x (DNx.x) should be check against the ECAM F/CTL trim value +x.x (-x.x) and the markings on the trim wheel.
Hey, Love your videos like always! I was curious if you were going to make another video on the TFDI MD-11. That is unless there is nothing more to be said about it currently. Again, love your videos, always fun to watch! 👏🎉👏
Hi Manuel is a very pleasure see your video. Thank you for giving us the opportunity to learn and have fun 🙏 Apart from the progress in performance, but from a realism point of view do you think it is more mature or will it be more mature than FSLABS?
Snarking about people behind their back probably isn't the best way to get more people on VATSIM you know. You talk about how fans contact you almost every flight now... maybe they'll be more likely to participate if they're not afraid of being mocked on RUclips without their knowledge.
Very important question: How do you use the "Lock" Cockpit interaction system without the blue highlight showing when you click a button? I need that too
Would recommend turning that off via the sim settings. Just set the cockpit interaction mode to legacy. Also if you’re comfortable I would hide the tooltips and turn off all assistance options. They just clutter your screen and make the sim feel like a game. 🍻
First time giving the Fenix a good look, but it’s quite an old A320 right? ADIRS panel, RMP, panel next to the PFD’s, all seem to be older compared to current models? Or do most current A320’s look like this?
Looool, the "luck" you must have to land in a first wings event, lol. i won't say anything though because i still haven't tried to do a flight on VSim. We've got to give credits to those controllers though for their patience. The "Lufthansa Regional" ERJ landing inside the condor was... strange to be honest. great video otherwise
Have had two AP disconnects which ruined two flights as was away at the time. Possibly something my end but previous version worked fine apart from 1 AP disconnects. Let’s see what happens, I carnt remember how to get it to re-engage was a trick for it trim and hand fly 400nm 😢. Apart from that was really good practice and visual approach 😃The FPS for me has improved for sure especially in external view. Thx for the video as always
Hello Emanuel, Did you plan an Intersection Take off from the beginning or why did the EFB calculate 1200 TO Shift of 1200m? Why did you not recheck the TO Shift after the runway change? The 1200m TO Shift at the beginning was for A12. Or are the values the same for A12 and B12? Thanks for your answer.
He have chosen the intersection that is why EFB calculated it. And he did recheck the take-off shift and expliciltly mentioned it stays the same for B12 - 1200m.
Mmm..I dont think its too much floaty..I think the floatiness comes from the papi-glidesope mismatch making you high most of the times and the fact that it requires too much backstick pressure when flaring to arrest the descent rate. So you either end up pulling too much and floating, or pulling up too little and slamming on the ground.
@@valet2972 I disagree. I have no problems with my FBW Neo landings and I do approach airports with displaced and also correct ILS glideslopes. Fenix is slacking with this, and I do hope they fix this because it really is an amazing add-on.
@@tax54321 I feel like the FBW doesn’t really feel heavy upon flaring, It doesn’t float too much but It settles down too easily in my opinion. The fenix does have the issue of requiring too much backpressure to flare which makes it float or slam in my opinion
I’m not saying I could do any better and it’s not a fair comparison but when your used to watching Heathrow live and seeing the stack and queue of takeoffs every 30 secs, all this vatsim action is very jarring. I’m not sure how real pilots can tolerate vatsim. It’s unfair comparison but vatsim is not even the same universe compared real world operations. It’s a two way street so have some sympathy with controllers when simmers don’t follow procedures either.
VATSIM is..... VATSIM. It's not the real world and anybody who believes it is just shows they have no clue of real aviation. Of course the controllers are hobbyists and as such they make a damn good job. I mean honestly, I would probably have rage-quitted hearing all those n00bs in this videos. Probably after throwing out some pretty strong insults. So my respect to those who can handle this! There's good reasons why I'm no longer controlling on VATSIM anymore and let my ratings expire. As a pilot though I have to agree with you. Sometimes it's a bit troublesome to "tolerate" what's going on as you said it. So many times where I would have smashed my head into the table if it wasn't for the fact I parked my mic there and didn't want to destroy any electronics :D
I love VATSIM but while the Controllers need to jump through a LOT of hoops to do what they do, anyone can log on as a 'pilot' and create absolute carnage. I would like it to have at least some basic standard to reach prior to being allowed to participate - it's just disrespectful to all the controllers who have worked so hard to qualify. New and inexperienced and imperfect but trying hard is ok - it's the folks who log on without a single clue (and without a care that they have no clue) who need to be weeded out.
@@AndyWhite it’s a fair point but what do you do limit vatsim access to people who pass a course ? The issue boils down to vatsim being a genuine effort to provide some function that in the RL is extremely tightly regulated, operated by very professional people, all whom have spent years training, within a international regulatory system grown over decades. This doesn’t include the xxxx billions of pounds spent on infrastructure. If any one part screws up people could/would die and it would fall apart in 30 seconds. Vatsim is a well intentioned GAME put on by well meaning people in a completely unregulated consequence free GAME. Any comparison to realife is completely false. I’m sure there are professional ATC people on vatsim just like RL pilots. I’m not bashing vatsim or telling people to or not use it, just it’s bound to be a total shit show at times for obvious reasons
@@gwalker3092 I think maybe my point is not clear - I'm not suggesting that VATSIM is or need be more akin to real life - what I'm saying is that controllers on Vatsim need to do a lot of study and examination in order to do their hobby (so actually there is some parallel with the real world here) whereas pilots on Vatsim don't need to do anything at all. I don't think there should be equal requirements for both but addressing the balance even a little would help to set a minimum standard and make life better for all, the new pilots included.
@@AndyWhiteI always wanted be a pilot but couldn’t due to being born with visual impairments in both eyes with no remedy. However, I loved aviation so much from small child I spent every hour thinking, studying, watching learning etc. I’m a little over zealous on certain things due to this and working for CAA for 7 years although I was never an ATC, but technical. I don’t mention this very often but i take it all too serious and ofc this subject jars with me due to my history. Msfs/xp whatever are GAMEs nothing else and I suppose should be treated as such. However the more people enjoy aviation the better 😊 however they do it. Personally, I just carnt deal with vatsim due to all its issues it’s just annoying. Let’s hope beyond ATC works 😂 AI putting people out of jobs a whole subject to argue about in its own right.
As a flight attendant, if I heard my captain say "This is Emmanual from the mechanical room" I would cringe so hard and loose all respect. in my captain, just saying. Thank GOD I don't fly for european pilots.
Sounds like a super toxic environment to work in - no small jokes allowed because some random flight attendant will loose his/her sh*t because of that... You probably hate Ted Lasso series as well.
This thing is just not worth it with the shit performance with out Frame gen. What's the point of MSFS if you have to lower settings to fly the Fenix?🤷🏻 If that's the case better fly the ToLiss A320 which has better flight dynamics.
It's a trade off. If you don't have an high end PC, don't bother leaving MSFS on the ultra settings and then expect add-on aircraft to miraculously run smooth like the default airplanes. Before Frame-Gen, I also had to lower my settings to fly the PMDG, FBW and Fenix. It's not much of a cut anyway, unless you really have an old computer..
@@tax54321 That's the point I don't have to lower my settings at all for PMDG, FBW A32NX, 787-9. It's only the Fenix which has it's own app doing the calculation. It's a poorly optimised addon and for £50 it's lousy work.
@@tax54321 Stop defending this garbage. PMDG, FBW and 787 at Inibuild KLAX 60+ fps while even in an mid sized airport Fenix shits the bed with CPU Main thread limited. If the simulation is all it offers then i will use the better addon; Toliss A320 which is way better anyway in terms of simulation.
@@Anand-cx8po I don't know what to tell you man, the fenix is the least resource heavy FPS-wise for me. I suggest you reach out to them or check their FAQ on FPS improvement.
@@tax54321 What's there to reach out? Being Mainthread limited is information enough. You may enjoy potato graphics and no addons but I don't use MSFS for that reason. If simulation is all i want then X Plane is what i will be flying for the A320. Atleast you have 260 circuit breakers👍🏻
Got quite a remarkable performance improvement with this latest update. The Fenix is really a joy to fly now.
yep, I got back about half of what I lost with the previous version: That's a good sign that we'll see even more!
same
same
Hello guys, unfortunately for me it’s not enough, I can’t use this beauty anymore on airports like KBOS or CYUL… 😢it’s perfect on Cruz but departures and arrivals on « demanding » airports it’s not as smooth as pmdg for exemple…
@@A330Driver yes, previous version was pretty bad regarding performance
46:12 really?.. That’s the reason why so many are afraid to join Vatsim server.. He has a wrong call sign and you call him Noob? Gosh!!!
He didn't call anyone that! He expressed his frustration after a series of basic mistakes made by other pilots. The pilots connect with VATSIM without any preparation. There are tons of materials on official VATSIM's websites that you need to kindly read and understand. If you don't want to, connect to mutiplayer, not VATSIM.
this guy is honestly the most arrogant aviation / sim youtuber atm. i fully agree, wrong way to go.
@@DiamondAviator I feel like, unfortunately most of this community is like that… Everything MUST be deadass realistic and following every real life procedure…They don’t get, that there are still people learning!
He didn't say anything wrong, just that he felt like it was one of those noob days. There is absolutely nothing wrong with that. Let's not forget that Vatsim is a network that is intended to simulate real airspace. As realistic as possible. If someone is not determined enough to read the rules and devote some time to learning, they can always fly in multiplayer mode or use one of the Atc programs, and not necessarily fly on Vatsim. For such people, I recommend, for example, the upcoming Beyond Atc.
@@imgroot7035 its not just about that particular sequence. its a certain attitude and vibe in his videos.
26:35 Hammermäßige PA 😂
Danke :D
XD
Always enjoying watching your RUclips videos, learning from a Pro :)
Hi Emmanuel,
Would you consider doing flights with MELs as well? Stuff that might change some takeoff/en route/landing procedures?
I love the little details - the way the cargo doors "bounce" when reaching top of travel as an example. Question - when you set flaps 1 in the MCDU, you didn't set "DN0.3" - is that not required?
THS is not required in the A320
The PITCH TRIM / MCDU / CG DISAGREE caution is raised when one of the three Trim setting are more than 1.3 degrees of the other. These are the physical Trim and Trim Wheel position, the computed THS from the INIT B weights after engine start (as it uses CG and not ZFWCG), and the PERF TAKE OFF THS field. I couldn't find any info for when it's not set, I assume it should autotrim according to the INIT B data. It is just a method for double checking data. Anyways the UPx.x (DNx.x) should be check against the ECAM F/CTL trim value +x.x (-x.x) and the markings on the trim wheel.
Hey,
Love your videos like always! I was curious if you were going to make another video on the TFDI MD-11.
That is unless there is nothing more to be said about it currently.
Again, love your videos, always fun to watch!
👏🎉👏
Seemed like a rough day at the office. Thanks for posting!!!
50:07 It was indeed FL150 :)
With the 3 planes merging on final, you probably have some sort of AI traffic (MSFS, FS Traffic, FSLTL) on top of the VATSIM traffic
Hi Manuel is a very pleasure see your video. Thank you for giving us the opportunity to learn and have fun 🙏 Apart from the progress in performance, but from a realism point of view do you think it is more mature or will it be more mature than FSLABS?
The ECAM ND XFR switch shows 3 under CAPT, but the actual aircraft doesn’t. Toliss has the same I saw on your channel haha!
Tell Randazzo 777 is ready for release!
I’m literally waking up every morning checking the chanel
Give 'em the time it needs, the wait will be worth it!
Snarking about people behind their back probably isn't the best way to get more people on VATSIM you know. You talk about how fans contact you almost every flight now... maybe they'll be more likely to participate if they're not afraid of being mocked on RUclips without their knowledge.
This video sums up pretty well why I will never have the courage to join Vatsim lmao
I feel you
I'm a commercial pilot and I'm truly having a tough time understanding these German controllers lol
Very important question: How do you use the "Lock" Cockpit interaction system without the blue highlight showing when you click a button? I need that too
Would recommend turning that off via the sim settings. Just set the cockpit interaction mode to legacy. Also if you’re comfortable I would hide the tooltips and turn off all assistance options. They just clutter your screen and make the sim feel like a game. 🍻
"Flaps 3... NO my friend"
Thank goodness I only fly one livery….Delta. So updates are easy 😁
Happy 2nd birthday to the channel!!!
First time giving the Fenix a good look, but it’s quite an old A320 right? ADIRS panel, RMP, panel next to the PFD’s, all seem to be older compared to current models? Or do most current A320’s look like this?
Hmmm Vatsim kind of busy on this one. Thanks for yet another quality video - I honestly don't know how you manage to fit in real life flying?
nice flyin!
Looool, the "luck" you must have to land in a first wings event, lol. i won't say anything though because i still haven't tried to do a flight on VSim. We've got to give credits to those controllers though for their patience.
The "Lufthansa Regional" ERJ landing inside the condor was... strange to be honest.
great video otherwise
Did you fly approach manually using ILS guidance?
Thanks for the video, informative as usual.
I'm not encouraged to join VATSIM!
Informative and entertaining....as always. No one can touch your videos. Thanks for what you do.
Haha des mit dem loading ist ganz realistisch in MUC 😂 Ein 32er dly lässt Grüßen 😂
Anyone else having the big where you turn off the cabin on the tablet and it still shows? I can't seem to fix it. Or any suggestions
Amazing video as always!
Are u german? If not u have great german skills!
Have had two AP disconnects which ruined two flights as was away at the time. Possibly something my end but previous version worked fine apart from 1 AP disconnects. Let’s see what happens, I carnt remember how to get it to re-engage was a trick for it trim and hand fly 400nm 😢. Apart from that was really good practice and visual approach 😃The FPS for me has improved for sure especially in external view. Thx for the video as always
Simply push the sidestick to its limits quickly and back.
@@Quotenwagnerianer What does that do? Fix the problem?
@@AntoniosSpiliotopoulos It resets the protection logic that prevents you from reingaging the AP.
Are TCAS RA’s with live traffic causing your AP disconnects or is it something else?
@@Danimalpm1 I don’t fly online and was away when happened I do some more flights see how it gies
Hello Emanuel,
Did you plan an Intersection Take off from the beginning or why did the EFB calculate 1200 TO Shift of 1200m?
Why did you not recheck the TO Shift after the runway change?
The 1200m TO Shift at the beginning was for A12.
Or are the values the same for A12 and B12?
Thanks for your answer.
He have chosen the intersection that is why EFB calculated it. And he did recheck the take-off shift and expliciltly mentioned it stays the same for B12 - 1200m.
how did you do in GSX that when asked for pushback it says face north-E3(some taxiway) and not nose left/tail right?
Depend 3rd party airports… same at LFBO
@@kdbninerseventwo3328I tried at LFBO and when I ask for pushback it askes me nose left or
Right not north or south
I dont know what it is but your mic seems to be way too sensitive... every "hit" on your desk or the mic can be heard
Would you be allowed to estimate the TO pitch trim like that IRL? I would guess it makes little difference but interested to know.
Airbus or Boeing? I mean you have flown both so
As I can see, DIST to go works correct now?
Why did they not installed winglets/sharklet?
They ran out of money to develop them. Thus they do the A319/321 first to fund the development.
what did you use for model matching? i have major issues with model matching not displaying the 747 model... it just refuses
I'm not a real A320 pilot but its seems way too floaty compared to A32NX or Toliss.
MSFS in general is. We tried on the 737 as well, but it just wasn't possible to get it right.
Ah, the Flare-nix A320 again... 🙂
"Flare-nix" - I laughed harder than I should have :D
Mmm..I dont think its too much floaty..I think the floatiness comes from the papi-glidesope mismatch making you high most of the times and the fact that it requires too much backstick pressure when flaring to arrest the descent rate. So you either end up pulling too much and floating, or pulling up too little and slamming on the ground.
@@valet2972 I disagree. I have no problems with my FBW Neo landings and I do approach airports with displaced and also correct ILS glideslopes. Fenix is slacking with this, and I do hope they fix this because it really is an amazing add-on.
@@tax54321 I feel like the FBW doesn’t really feel heavy upon flaring, It doesn’t float too much but It settles down too easily in my opinion. The fenix does have the issue of requiring too much backpressure to flare which makes it float or slam in my opinion
That’s also a problem with the sim and ground effect
I’m not saying I could do any better and it’s not a fair comparison but when your used to watching Heathrow live and seeing the stack and queue of takeoffs every 30 secs, all this vatsim action is very jarring. I’m not sure how real pilots can tolerate vatsim. It’s unfair comparison but vatsim is not even the same universe compared real world operations. It’s a two way street so have some sympathy with controllers when simmers don’t follow procedures either.
VATSIM is..... VATSIM. It's not the real world and anybody who believes it is just shows they have no clue of real aviation. Of course the controllers are hobbyists and as such they make a damn good job. I mean honestly, I would probably have rage-quitted hearing all those n00bs in this videos. Probably after throwing out some pretty strong insults. So my respect to those who can handle this! There's good reasons why I'm no longer controlling on VATSIM anymore and let my ratings expire.
As a pilot though I have to agree with you. Sometimes it's a bit troublesome to "tolerate" what's going on as you said it. So many times where I would have smashed my head into the table if it wasn't for the fact I parked my mic there and didn't want to destroy any electronics :D
I love VATSIM but while the Controllers need to jump through a LOT of hoops to do what they do, anyone can log on as a 'pilot' and create absolute carnage. I would like it to have at least some basic standard to reach prior to being allowed to participate - it's just disrespectful to all the controllers who have worked so hard to qualify. New and inexperienced and imperfect but trying hard is ok - it's the folks who log on without a single clue (and without a care that they have no clue) who need to be weeded out.
@@AndyWhite it’s a fair point but what do you do limit vatsim access to people who pass a course ? The issue boils down to vatsim being a genuine effort to provide some function that in the RL is extremely tightly regulated, operated by very professional people, all whom have spent years training, within a international regulatory system grown over decades. This doesn’t include the xxxx billions of pounds spent on infrastructure. If any one part screws up people could/would die and it would fall apart in 30 seconds. Vatsim is a well intentioned GAME put on by well meaning people in a completely unregulated consequence free GAME. Any comparison to realife is completely false. I’m sure there are professional ATC people on vatsim just like RL pilots. I’m not bashing vatsim or telling people to or not use it, just it’s bound to be a total shit show at times for obvious reasons
@@gwalker3092 I think maybe my point is not clear - I'm not suggesting that VATSIM is or need be more akin to real life - what I'm saying is that controllers on Vatsim need to do a lot of study and examination in order to do their hobby (so actually there is some parallel with the real world here) whereas pilots on Vatsim don't need to do anything at all. I don't think there should be equal requirements for both but addressing the balance even a little would help to set a minimum standard and make life better for all, the new pilots included.
@@AndyWhiteI always wanted be a pilot but couldn’t due to being born with visual impairments in both eyes with no remedy. However, I loved aviation so much from small child I spent every hour thinking, studying, watching learning etc. I’m a little over zealous on certain things due to this and working for CAA for 7 years although I was never an ATC, but technical. I don’t mention this very often but i take it all too serious and ofc this subject jars with me due to my history. Msfs/xp whatever are GAMEs nothing else and I suppose should be treated as such. However the more people enjoy aviation the better 😊 however they do it. Personally, I just carnt deal with vatsim due to all its issues it’s just annoying. Let’s hope beyond ATC works 😂 AI putting people out of jobs a whole subject to argue about in its own right.
Any issues with the latest update?
yes
@@A330Drivercan you elaborate……
❤❤❤
As a flight attendant, if I heard my captain say "This is Emmanual from the mechanical room" I would cringe so hard and loose all respect. in my captain, just saying. Thank GOD I don't fly for european pilots.
Sounds like a super toxic environment to work in - no small jokes allowed because some random flight attendant will loose his/her sh*t because of that... You probably hate Ted Lasso series as well.
What a nice airplane but what a waste to have it on MSFS!😢
This thing is just not worth it with the shit performance with out Frame gen. What's the point of MSFS if you have to lower settings to fly the Fenix?🤷🏻 If that's the case better fly the ToLiss A320 which has better flight dynamics.
It's a trade off. If you don't have an high end PC, don't bother leaving MSFS on the ultra settings and then expect add-on aircraft to miraculously run smooth like the default airplanes. Before Frame-Gen, I also had to lower my settings to fly the PMDG, FBW and Fenix. It's not much of a cut anyway, unless you really have an old computer..
@@tax54321 That's the point I don't have to lower my settings at all for PMDG, FBW A32NX, 787-9. It's only the Fenix which has it's own app doing the calculation. It's a poorly optimised addon and for £50 it's lousy work.
@@tax54321 Stop defending this garbage. PMDG, FBW and 787 at Inibuild KLAX 60+ fps while even in an mid sized airport Fenix shits the bed with CPU Main thread limited. If the simulation is all it offers then i will use the better addon; Toliss A320 which is way better anyway in terms of simulation.
@@Anand-cx8po I don't know what to tell you man, the fenix is the least resource heavy FPS-wise for me. I suggest you reach out to them or check their FAQ on FPS improvement.
@@tax54321 What's there to reach out? Being Mainthread limited is information enough. You may enjoy potato graphics and no addons but I don't use MSFS for that reason. If simulation is all i want then X Plane is what i will be flying for the A320. Atleast you have 260 circuit breakers👍🏻