Morning, thanks for sharing the video, your muffler delete is the same piece from Ea888 2gen transversal engines? What about the inlet pipe? Its also applicable?
Done it on my S3 and does improve the noise, a bit, but that's about it. Need to listen to it as well. Do need to be careful with cheap ones when installing as they may require the seal from the OEM part to be re-used.
It absolutely is a system modification. The air has a direct path now increasing efficiency. It’s known to increase 1-2 hp. Add a turbo inlet and an intake with it and you will feel something.
@@stig5763 Had turbo inlet and intake done when I've done it. Even if there is 5HP in there on a 310HP car can't say that it felt any different. After it's an easy mod and rather inexpensive so doesn't really hurt much and I guess most upgraded turbo comes with it, but it is still a very small gain. And without tune one doesn't really yield from the mods much. But tbh I didn't remove it from my car either so maybe it did a little something when went Stage 2.
Does this make your fuel economy shit? Cuz I always wanted to install, blow off valve and turbo muffler delete, but was told it effects fuel economy.. is that case by you as well?
It may affect fuel economy a little bit but it is impossible it changes much. I doubt you are gonna see any difference. Different is the blow-off valve. Not the part itself but the way you are gonna be using the throttle. Pedal down, building pressure, pedal up, stu stu stu, grin, pedal down, building pressure, etc.
If you're still doubting us that he's pronouncing it wrong just listen to any German say it. This might be pretty but he has no idea how many people won't watch his videos because of the I'll pronounce it anyway I want to comment. I'm sure it's gonna say he doesn't care but you didn't carry wouldn't be making these videos. I'm out!
Авто/Мото
Morning, thanks for sharing the video, your muffler delete is the same piece from Ea888 2gen transversal engines? What about the inlet pipe? Its also applicable?
Good video! Where did you get that front lip?
I've seen them on Ebay around 100 but not carbon fiber. His might be, but not sure. Looks black to me. Very nice.
Done it on my S3 and does improve the noise, a bit, but that's about it. Need to listen to it as well.
Do need to be careful with cheap ones when installing as they may require the seal from the OEM part to be re-used.
It absolutely is a system modification. The air has a direct path now increasing efficiency. It’s known to increase 1-2 hp. Add a turbo inlet and an intake with it and you will feel something.
@@stig5763 Had turbo inlet and intake done when I've done it. Even if there is 5HP in there on a 310HP car can't say that it felt any different.
After it's an easy mod and rather inexpensive so doesn't really hurt much and I guess most upgraded turbo comes with it, but it is still a very small gain.
And without tune one doesn't really yield from the mods much.
But tbh I didn't remove it from my car either so maybe it did a little something when went Stage 2.
Beardchanics Garage every bit helps :P cheers brother.
@@stig5763 It all adds up :)
Bro I got a b8 a4 fam, getting my ko4 soon. Is that something you plan on getting in the future
Sure is
Will the check I’m engine light come on?
Would this mod reduce the life of your turbo and can you do this on a 3.0 V6 TDI?
Can you make a link of where u got all your mods
This guy 😂 “i bought this bitch”
when you did stage 1 or 2 did you notice a problem with oil intake?
These cars all have consumption issues, they have bad rings from factory
Does this make your fuel economy shit? Cuz I always wanted to install, blow off valve and turbo muffler delete, but was told it effects fuel economy.. is that case by you as well?
It may affect fuel economy a little bit but it is impossible it changes much. I doubt you are gonna see any difference.
Different is the blow-off valve. Not the part itself but the way you are gonna be using the throttle. Pedal down, building pressure, pedal up, stu stu stu, grin, pedal down, building pressure, etc.
do you have a link for it?
How do you get that flutter 🥺
Couldn’t I just weld on metal over the slits on the oem one?
If you’re taking it out might as well swap it regardless 😃
I was asking sort of theoretically could this be done I don’t plan on doing that
whats ur 0-60?
Havent tested it out yet but will soon
can u just cover those slits with tape, same mod for 1$
Wouldnt recommend it , just do to boost and pressure its a small chance it can get sucked up into the engine
@@Gat_ZillaI cut a piece of aluminum band and I’m JB welding it over the slits. (High Heat JB weld)
Causes more back pressure
Really? Can this be bad for the turbo ?
You say Audi the correct way. 👍
No
yikes
Actually your pronunciation of Audi is correct. It’s aw-dee not ow-dee. 👍🏽
Incorrect it's s german car so AU makes a -OW sound so it's owdee and not awdee
Thats not correct at all
If you're still doubting us that he's pronouncing it wrong just listen to any German say it. This might be pretty but he has no idea how many people won't watch his videos because of the I'll pronounce it anyway I want to comment. I'm sure it's gonna say he doesn't care but you didn't
carry wouldn't be making these videos. I'm out!
Fucking linguist on a car page....GTFOH
the representative of audi said it’s pronounced ow dee
Pacificly?
Are you talking about your down pipe??