If you tap the bleed screw area and put a -6an fitting you can run cold through front and have the return aka hot line from the -6an in the back so it eliminates a hot side in the IC bricks so you run cold in the bottom and top and have it exit the back of the brick to the HX and I thought the pump was after the HX and sent cold up to the SC
Just a thought (could be complete BS, so add salt where needed) but on the OEM IC cores, if you run bigger piping and potentially increase pressure in the loop, couldn't that lead to premature leaking in those cores that are already prone to leaking?
@@boerieza potentially. However the actual cause of leaking intercooler is mainly excessive heat and also the lifetime of the intercooler itself. So actually in theory you could very well be prolonging the life of the IC core by keeping it much colder than usual. Elevating heat stress on the intercooler channels therefore prolonging the life. The high pressures do not exceed the strength of the intercooler channels even with double the flow/pressure.
Personally I wouldn’t cutt the wiring harness for the 150 cause the bricks would get burned real quick. It’ll do its job regardless without making it run 100% of the time
I’ll be reaching out to you to build my rs6 here soon 😆
@@BackYardBoyz YOOO dream build ‼️
You’re back bro💚
@@rolexwatchcoltd5414 with a lot more on the way! 🫵🏻
Awesome video bud. You inspired me to do all of these mods when upgrading to stage 2
Excellent video as always!
@@mercracing thank you for supporting Jose!
Glad you’re back bro. ❤️
@@haydenk6119 time to make moves ;)
OMG NEED FOR BUILD HAS A NEW VID 😮💨👑
@@gabrielpulgar4639 bro rose from the dead
Bros back ❤
@@ozzyalis time to push out content 😉
I bought a b8.5 about a year ago, didn’t feel like doing anything to it, now my favorite car Chanel’s buying the s4 and tuning it😂.
My CANADIAN AUTO PERFORMANCE HX has never let me down
@@Qu13tM0n3y time to upgrade other parts of your cooling system.
This is dope I’m running the merc racing high capacity HX so pairing that with everything you just did I’m hoping to maximize cooling. Amazing vid
@@TaransGarage the mercracing high capacity is the best HX. 👍🏻 the 034 one is definitely a beautiful quality piece.
What a way to end the week 🎉. Back for good? ❤
@@leanreox 8 videos filmed since May. All in editing. Fingers crossed to release 4 more videos before end of year. Back for good.
Fire 🔥🔥🔥
@@doupecan3834 thanks for supporting
If you tap the bleed screw area and put a -6an fitting you can run cold through front and have the return aka hot line from the -6an in the back so it eliminates a hot side in the IC bricks so you run cold in the bottom and top and have it exit the back of the brick to the HX and I thought the pump was after the HX and sent cold up to the SC
@@Qu13tM0n3y pulling the hot water out of the intercooler bricks and pushing the cold water in is more effective. 🙂
That sounds like a huge restriction though
lets go!!! you make me wanna get a b8 to build along side my b9.5 stage 3 😁😁
Just a thought (could be complete BS, so add salt where needed) but on the OEM IC cores, if you run bigger piping and potentially increase pressure in the loop, couldn't that lead to premature leaking in those cores that are already prone to leaking?
@@boerieza potentially. However the actual cause of leaking intercooler is mainly excessive heat and also the lifetime of the intercooler itself. So actually in theory you could very well be prolonging the life of the IC core by keeping it much colder than usual. Elevating heat stress on the intercooler channels therefore prolonging the life. The high pressures do not exceed the strength of the intercooler channels even with double the flow/pressure.
Hey guys, if there is headlight washer nozzle, what's the step to disconnect when remove the bumper?
@@CrazyYorkX disconnect the washer nozzle behind the driver side headlight.
Yo love the content! I’ve got a 2013 S4, I’ve been on the hunt for a black optics grille. Would you be willing to sell yours??
@@colethorin long gone. Honeycomb is the way to go. 👊🏼
Personally I wouldn’t cutt the wiring harness for the 150 cause the bricks would get burned real quick. It’ll do its job regardless without making it run 100% of the time
Ahh I thought this video said nos install 😅😂❤
@@Aliastaylor one day. Wet
Shot. 😃