How to make your own veneers for creative woodworking!

Поделиться
HTML-код
  • Опубликовано: 6 янв 2025

Комментарии • 152

  • @AssassinoooX
    @AssassinoooX 3 года назад +21

    Very well explained. In the podcast you talk about Bob being very eloquent and putting thoughts into words and this video was so easy to follow and understand. Awesome work David!

    • @donaldpowell7762
      @donaldpowell7762 3 года назад +1

      Exactly! I consider myself relatively intelligent, but I just couldn’t wrap my head around box joint jigs. Then I watched David’s box joint video, and it all made sense. There’s just something about his way of explaining things that just resonates with me. 🙂

    • @MakeSomething
      @MakeSomething  3 года назад +3

      thank you guys! 🙏

    • @GaryCurlewII
      @GaryCurlewII 3 года назад

      I agree with both these guys. I'm a beginner at woodworking myself but I was easily able to follow along with his demonstration and fully understood by his teaching methods. Love the "why/why not to" elaborations especially

  • @seanfuller1561
    @seanfuller1561 3 года назад +7

    I have moved into a new house recently and do not have a workshop setup currently. All my equipment is wrapped up and stored in my garage until I can get a shop built in my backyard. Watching your videos every week really helps me feel like I am still "Making It" even though I am not. Thank you for your dedication to always putting out new intriguing projects.

  • @jennieanddavis
    @jennieanddavis 3 года назад +6

    My heart sank the instant you dropped the guide through the band saw table. 😂

  • @jdgindustries2734
    @jdgindustries2734 3 года назад

    Glad to hear the old MakeSomething theme at the end... It was like talking to an old friend you haven't heard from in a while.
    I'm not sure I can pull this off, but I have an awesome idea for a project if I can get it to work... Like you said, you can use any wood.. I love the idea of a spalted maple veneer!

  • @jumpingjacks5558
    @jumpingjacks5558 3 года назад +1

    Excellent video. It's nice to have more control over the veneers you make then fumbling through multiple in store veneers looking for just the right one you never can find.

  • @alanburr1866
    @alanburr1866 3 года назад +1

    There will never be a replacement for Anthony Bourdain. But I would choose you for Raw Craft. Love your voice and tempo.

  • @SuffolkFarmer
    @SuffolkFarmer 3 года назад +3

    Thank you David, Hope your doing ok ? Look forward to “Making it “ every week

  • @Pelthail
    @Pelthail 3 года назад

    I make my own veneer as well and I love it. One of my favorites is to buy exotic woods and veneer them for inlay.

  • @Mhakeman
    @Mhakeman 3 года назад

    I am so excited for the next video! I am resawing a bunch of walnut right now for 2 twin beds for my 4 year old twins!

  • @johntaylor1359
    @johntaylor1359 3 года назад +1

    Really superb instruction....especially using a sledge for very thin pieces....thanks john uk

  • @anaphylaxis2548
    @anaphylaxis2548 3 года назад

    1/16”, I’m impressed! …and I also need a drum sander. Thanks David, now I want to try this.

  • @bobbysharp
    @bobbysharp 3 года назад

    Thanks brother, building a band saw to do nothing but Re-Saw! The sled for the planer is a great idea the sand paper seems to hold it very nicely!!! Thanks for that tip. Keep turning left!

  • @mmcnama4
    @mmcnama4 3 года назад +2

    If you do a ten-minute video of you flapping veneers, you've earned my like... I mean, you've earned it here too but I'll happily do another!

  • @eddieroy8037
    @eddieroy8037 3 года назад

    I never made veneers before but after seeing your video I said way not
    Worked great thanks you opened up a lot of new projects for me

  • @blackvenges
    @blackvenges 3 года назад +2

    Another great video.
    I laughed when the setup block fell through the throat plate.

    • @MakeSomething
      @MakeSomething  3 года назад

      Thanks! Yeah, that wasn't supposed to happen but it made me laugh.

    • @mtelewicz
      @mtelewicz 3 года назад

      Yeah I lost it at that moment. Especially since it just went unmentioned.

  • @andydudas2376
    @andydudas2376 3 года назад

    Not a woodworker myself(yet) but I love the idea and overall concept of projects like this or milling lumber in general. The project before the project that is itself part of the project. The work you have to put in, in order to do another kind of larger more involved project/work. The execution and importance of each step along the way. We've been talking a lot about how, in life one dot is connected to the next and so on, that we cannot get to the subsequent dot until we get to the next dot. And this morning, I watched you mill down some walnut into sheets of thin veneer that will ultimately become part of one thing that will become another even larger thing...and it was as entertaining and informative as your larger projects.
    Be well.

  • @billdiehl156
    @billdiehl156 3 года назад +1

    Hoping in the near future to upgrade my bandsaw so I can start cutting veneers. Until then, I’ll just have to buy them.
    Very informative video!

  • @anthonyprokos5098
    @anthonyprokos5098 3 года назад +1

    David, as always, beautiful!
    The scene at 2:39 earned my like. 👍

  • @SilverShinepony
    @SilverShinepony 2 года назад

    Dude your workshop looks like a living room, love it !

  • @MCsCreations
    @MCsCreations 3 года назад +1

    Fantastic tips, Dave! Thanks a lot! 😃
    Stay safe there with your family! 🖖😊

  • @robertspeer
    @robertspeer 3 года назад

    Wow, you’ve gotten really good at these videos. I was thinking about the older vids and pulled up this one. Lots of steady focused progress.

  • @danpeikes
    @danpeikes 3 года назад

    Nice video. Style was a little different but I like it. Really liked the intro about the tools needed.

  • @TheMikeNan
    @TheMikeNan Год назад

    As already, you are great. Thanks for sharing your methods.
    Kansas USA

  • @unitwoodworking5403
    @unitwoodworking5403 3 года назад

    You make me change ways of thinking in many ways to make my own veeneers. :) :) :)

  • @mroctarine
    @mroctarine 3 года назад

    Planning on stripping our old hardwood faced and cardboard core doors for their facing, should come up nicely.

  • @Abdurrahman1-i4y
    @Abdurrahman1-i4y 3 года назад

    Your workshop is very colorful , organized, and beautiful 😍 may Allah bless you and your workshop

  • @MakerDavid
    @MakerDavid 3 года назад

    I'm looking forward to seeing all walnut plywood

  • @ktulu193
    @ktulu193 3 года назад

    I just wanna say, you're looking happy and healthy, David!

  • @SzymonNowak-l8k
    @SzymonNowak-l8k Год назад +1

    Hi David, could you tell me what thickness of veneer you did in the video? And could you update link on Drum Sander (current link doesn't work).

  • @goali3903
    @goali3903 3 года назад

    Great video David! I can’t wait to see the full walnut plywood!

  • @vinkelto
    @vinkelto 3 года назад

    Thanks man. I would never have thought about this. A great tip!

  • @reforzar
    @reforzar 3 года назад +2

    The brass set up block got me 🤣🤣🤣

  • @thelwood
    @thelwood 3 года назад

    Excellent video!

  • @TomMakeHere
    @TomMakeHere 3 года назад +1

    Great video. Looking forward to seeing what you will do with the homemade plywood
    ps don't forget to get the setup block out of the bandsaw 😂

  • @chrisunrath8343
    @chrisunrath8343 3 года назад

    Thanks for sharing the process! Love the splotchy back ground with the color behind the drill press. I am going to totally use that as inspiration for a couple of canvases! That's what I am making this weekend

  • @heyitsthatdude17
    @heyitsthatdude17 3 года назад

    Nice, tight, informative video Dave. Thanks!

  • @chelsea78344
    @chelsea78344 9 месяцев назад

    Thank you, this is extremely helpful

  • @dtork47
    @dtork47 3 года назад

    Always enjoy and you get me think’n! Thanks.

  • @josephdorey8458
    @josephdorey8458 Год назад

    What's the reason you'd want to make them thinner (after getting the surfaces smooth)? After the comment at the beginning about sanding through thin veneers I'd have thought the closer you could keep it to the initial re-sawn thickness the better? (I'm a blacksmith by profession, woodworker only as a hobby)

  • @topsaw
    @topsaw 3 года назад

    Great, very informative. Thank you

  • @benjaminkaufman3887
    @benjaminkaufman3887 Год назад

    Question: if I need a wide veneer, how would I edge join two veneers together?

  • @Budietoyka
    @Budietoyka 3 года назад

    Very well explained man. Good job!

  • @Daninashed
    @Daninashed 3 года назад +2

    Would love to see someone have a go at making a veneer peeler, does anyone know if it's been done?

    • @MakeSomething
      @MakeSomething  3 года назад

      That would be awesome!

    • @CNile-se9xw
      @CNile-se9xw 3 года назад

      Veneers aren't for me, detures are the way to go. 🤣

  • @brevs8387
    @brevs8387 3 года назад +2

    "as always ... stay passionate and make something... with veneers" 😂

  • @thanemakes5377
    @thanemakes5377 3 года назад

    Love this… great tips inside! Thanks David, I had an “ah ha” moment!

  • @ForestWoodworks
    @ForestWoodworks 3 года назад

    Super helpful. Thank you David!

  • @acanadianwoodworker
    @acanadianwoodworker Год назад

    2:37 INTO THE VOID

  • @stepcraftgermany
    @stepcraftgermany 3 года назад

    A great video! Love how you explain everything so well!

  • @pepper7144
    @pepper7144 2 года назад

    what grit paper did you use in the drum sander to clean up the veneer.

  • @pedearruda
    @pedearruda 2 года назад

    Is it good for veneering mdf.. when i use home sawn venner.. i mean thick like that.. about 3/33"?

  • @jmclairmont
    @jmclairmont 3 года назад

    Special project, huh? Could it perhaps be time for the next set of wedding rings already? 🤔
    Looking forward to the video!

  • @aberba
    @aberba Год назад

    Now I need a good tale saw, a bigger planer, a big joiner and a drum sander :( I wish we had hardwood veneer here for sale.

  • @sgsax
    @sgsax 3 года назад +1

    Lots of great tips here, even if you're not going to be making your own veneers. I'm still getting used to my planer and was surprised when I tried to get something too thin and got a bad catch. Glad to know it's a grain issue and I can watch out for that next time. I really like my Rikon benchtop bandsaw, but I still get blade drift when I push too hard. Maybe I just need a better blade for it. If you made a video of 10 minutes of board flapping, I would definitely watch it, and probably die laughing. 🤣 Thanks for sharing!

  • @woodandwheelz
    @woodandwheelz 3 года назад

    Dave at 7:38 "I could make a 10 minute video of me doing this [flapping the veneers] and I would have a great time."
    Me: And you would still have thousands of views and likes. 😁
    I'm always learning something from you. Thank you for another great video.

  • @langanart
    @langanart 3 года назад

    Another "awesome" video Dave. Can't wait to see what you do next with the veneer plys!

  • @joobasics6891
    @joobasics6891 Год назад

    Is 5TPI too many teeth for veneer cutting (blade is 3/4in width)?

  • @dejayrezme8617
    @dejayrezme8617 2 года назад

    Could you make veneer with a kind of oversized hand planer?
    My guess is you'd need a big machine with enough power and also need to soak the wood for that to work.

  • @SawdustmakerLori
    @SawdustmakerLori 3 года назад

    Good tips......thank you!

  • @derekdodson5623
    @derekdodson5623 3 года назад

    Thanks, Dave!

  • @marcoalfi
    @marcoalfi 2 года назад

    Awesome video.

  • @kayu_kreatif
    @kayu_kreatif 3 года назад

    Very Good👍👍👍

  • @jeffcoh3440
    @jeffcoh3440 2 года назад

    Thanks for the vid, can you please comment on whether or not you could use mdf as a substrate rather than plywood, as quality plywood is expensive where I live but mdf is readily available. Thanks again.

    • @MakeSomething
      @MakeSomething  2 года назад

      Absolutely you can!

    • @jeffcoh3440
      @jeffcoh3440 2 года назад

      Thank you. I have learnt a lot from your videos.

  • @garagemonkeysan
    @garagemonkeysan 3 года назад

    Great video. Cool and clear instructions. Can't wait to see the final project. Mahalo for sharing! : )

  • @cristianpopescu78
    @cristianpopescu78 2 года назад

    Great video! Thanks!

  • @randsipe224
    @randsipe224 2 года назад

    Which bandsaw blade are you using? Looks like carbide clad?

  • @kahoycrafts
    @kahoycrafts 3 года назад

    Hey David, it seems like I stopped getting notifications on your videos, even though the 🔔 is set to ALL. 😔 This is great, I definitely want to try making some veneers soon.

  • @bretisimo
    @bretisimo 3 года назад

    How is this shop so clean? What type of air filtration do you use?

    • @MakeSomething
      @MakeSomething  3 года назад

      No air filtration. Just dust collection at each tool.

  • @donaldpowell7762
    @donaldpowell7762 3 года назад

    It’s going to work!

  • @tobykathan8277
    @tobykathan8277 3 года назад

    How thick can veneers be?

  • @jeffbrady4281
    @jeffbrady4281 3 года назад

    Your awesome ! Thanks for the video.

  • @jzvetter
    @jzvetter 3 года назад

    the brass block into the saw!!! LOLOL my life

  • @samrix5793
    @samrix5793 3 года назад

    Which saw is it?

  • @MakerModder
    @MakerModder 3 года назад

    I can't believe 3/4th inch Baltic birch will potato chip.. guess I will find out as I'm not using double the material of 19 a board foot wood I am trying to stretch..

  • @squeekhobby4571
    @squeekhobby4571 3 года назад

    Great idea

  • @SuperOxygenTV
    @SuperOxygenTV 3 года назад

    OOO...what a great video. Walnut chair backs that are curved using ALL walnut plys! How far can these veneers bend before they break? Can they go half circle? Would you recommend that?

  • @vubdub1967
    @vubdub1967 3 года назад

    How many 1/8 inch set up blocks are in Dave's saw? LMBO!!

  • @ossieljuarez1936
    @ossieljuarez1936 3 года назад

    Can you veneer mdf? And if so, do you need a specific type of glue for it?

    • @MakeSomething
      @MakeSomething  3 года назад +1

      You can and I'm fairly sure wood glue or contact cement will work fine.

  • @WalterRiggs
    @WalterRiggs 3 года назад

    I’m going to have to get some crap wood to practice this. Every time I try to resaw anything, it comes out thin in the middle, thick on top and bottom, or flat but wedge shaped. I’ve ruined pine, walnut, cherry and (last weekend) curly maple. I’ve tried thick blades, thin blades, flat fence, fence with a round bar on it so I could pivot the wood. Nothing’s worked so far. (I was PISSED about the maple)
    Maybe I need a different blade.

    • @dwightl5863
      @dwightl5863 3 года назад

      As Dave said: "Wide, sharp blade and go slow". Sufficient blade tension helps. Perhaps you need to adjust the fence for drift. Table square to the blade. Blade guides just barely touching the blade. In short a adjusted saw. IMHO

  • @Boeing_hitsquad
    @Boeing_hitsquad 3 года назад

    If you soak the veneer and then ROLL it, it will be more flexible and go around corners or act like a leather flap for fancy to containers (invented by Ekan, in Canada.. and seen on their website)

  • @themikejmartin
    @themikejmartin 3 года назад

    Super cool! Thanks

  • @TetraCNC
    @TetraCNC 3 года назад

    Nice Two questions. What grit were you using on the drum sander? Why did you flex the end up while feeding into the drum sander?

    • @MakeSomething
      @MakeSomething  3 года назад +1

      I think I have 120 in there. And no reason for the flex. Just because it's fun!

  • @DonsWoodies
    @DonsWoodies 3 года назад +1

    You gave me a great idea with the solid wood plywood. I'm going to try that, but with different species. Maybe walnut and maple. Make a small board about 1-1/2" thick and do some creative cutting to see what it will look like. Feel free to use my brilliant idea for your own video. LOL.

  • @jimeads3460
    @jimeads3460 3 года назад

    Great video. What grit do have on your drum sander? I have one but it leaves a lot lines that I have to sand away with higher gritS. Just curious what you use. Thanks

    • @MakeSomething
      @MakeSomething  3 года назад +1

      I’m pretty sure i have on 120. Drum sanders are a pain. You have to take light passes and if you burn or clog the sandpaper the only fix is to change it. It took me a while to get the feel of it so it work work good.

  • @alexclark6777
    @alexclark6777 3 года назад

    @4:09 I cannot be the only person who was thinking of that episode of The Office with the DVD screensaver... right?

  • @skpince
    @skpince 11 месяцев назад

    Veneeeeeeeerr, the man says. 😊

  • @christianjanes
    @christianjanes 3 года назад

    Great video. Iv just got a big bandsaw so am definitely going to give this a go. I
    May have missed something but where is camera Dan?

  • @dpmeyer4867
    @dpmeyer4867 3 года назад

    thanks

  • @jasonmpreston
    @jasonmpreston 3 года назад

    Once you cleaned up the 1/8th inch thick veneers, aside from the specific project that you are working on, why take them down to 1/16th or beyond?

    • @MakeSomething
      @MakeSomething  3 года назад

      no reason other than I don’t want them so thick that they add too much thickness to the piece I’m gluing them on.

  • @U2BER2012
    @U2BER2012 2 года назад

    Very nice work!
    Was that cherry wood that you were resawing?

  • @wandapiedra8973
    @wandapiedra8973 3 года назад

    What brand is your drum sander?

  • @graficafoto7917
    @graficafoto7917 3 месяца назад

    Hey man, I was looking for your grand Dad interview video but I cant find it, by the Way, did you see Giuseppe Tornatore's great movie called "la mejor oferta"? (thats in spanish) its a Real Wonder, lets see it, thanks for the nice and funny videos and of course the making it podcast 🤟

    • @MakeSomething
      @MakeSomething  3 месяца назад

      ❤️ ruclips.net/video/m3Z0CoSw7ko/видео.html

  • @TremendouslyAngryRon
    @TremendouslyAngryRon 3 года назад

    Guess I need to go and find myself a bandsaw!

  • @phillipstanfill5392
    @phillipstanfill5392 Год назад

    Awesome

  • @deejaymobile
    @deejaymobile 3 года назад

    Love your work as always! :oD

  • @miloszivkovic6922
    @miloszivkovic6922 3 года назад

    How is that plank treated to look like piece of plastic?

  • @bradleymallari2947
    @bradleymallari2947 3 года назад

    Cool!!! 😍

  • @thomasverdi2056
    @thomasverdi2056 3 года назад

    Dave great informative video. I’m currently looking at a LaGuardia bandsaw and I’m curious which one you use.

  • @ReeseCustoms
    @ReeseCustoms 3 года назад

    Man that just makes me wish my band saw didn't suck even more. I can't get a good cut out of it no matter what I do

  • @rodrigogs500
    @rodrigogs500 3 года назад

    Fácil, rápido, y cualquiera con un taller de carpintería avanzado puede hacerlo, 🤣🤣

  • @dandavis5832
    @dandavis5832 3 года назад

    I'm better off buying veneer :( But I love your shop remodel! Is that a new blue wall?