Это видео недоступно.
Сожалеем об этом.
How To Paint 3d Prints - Joining Two Resin models
HTML-код
- Опубликовано: 3 янв 2024
- I don't know much about an omni man but I know how to make him look cool with his invincy pal. This week I combined two statues and painted them as one!
From the wonderful patreon of Nice X Collectibles
For the model files and more, please check out this video's sponsor: / nicexcollectibles
The Printer: Uniformation GK two : www.uniformati...
Get $80 off when you use Code: ground
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected...
🎨 Supplies: elementgames.c...
🖌️ US Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/3FuG821
▪️ Sunlu standard Resin: amzn.to/3Fns0aV
▪️ The Army Painter Wet Palette: amzn.to/3M6Q45K
▪️ Vallejo White Ink: amzn.to/400s4ae
▪️ Citadel Chaos Black Primer: amzn.to/3tw57zm
▪️ Gold spray paint (similar to Montana Gold): amzn.to/3Fm1rTo
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/45DgK53
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/3M46sUw
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3rP1gx3
▪️ Mixed sandpaper: amzn.to/492fon6
🖌️ UK Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/46AFX1j
▪️ Sunlu standard Resin: amzn.to/48ZDgYv
▪️ The Army Painter Wet Palette: amzn.to/3tFj1zv
▪️ Vallejo White Ink: amzn.to/3Fnu4zH
▪️ Vallejo Blue Violet ''Pinkle'': amzn.to/46VPsY
▪️ Citadel Chaos Black Primer: amzn.to/48ZllkQ
▪️ Montana Gold spray paint Gold Chrome: amzn.to/46T2uWM
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/3FkG7Om
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/491selO
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3tFujnj
▪️ Mixed sandpaper: amzn.to/3S5ZaTX
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected...
📍 Check out ROXY ROSE!
....
vm.tiktok.com/...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my RUclips channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected
Killer! Great work as always. You keep me inspired to continue painting even when I lose my drive
Get back to the painting desk!!! Haha no for real. I’m glad to inspire you dude. I honestly just want to keep people feeling confident, it’s not as hard as it looks
Another dynamic piece! Great to see combing two bases also!
Great job man, Im happy to have found your channel as it has inspired me to use my Airbrush a lot more than I do. Also forget about those people complaining. What I have found in the 10 years of model painting is that everyone has their own way of painting and I dig yours.
Thanks my dude. You should use the crap out of that airbrush. A little overspray never hurt anyone 😉
You have no idea how happy I am that you did these models. The next prints I wanted to do was these two and I wanted to see how you would paint them because I still don't really know what I'm doing, so this is perfect timing. I immediately subbed to the Patreon as well lol.
Awesome dude. Hope the video helps! Someone said to overlap the bases in the slicer before printing. It’s a bit of a guess if the models will fit right but could be an option to look at.
Oh man!!! These look soo incredible!!!
Wow, great job. Just started with 3d printing last week, printed a small Omniman Bust, and painted with Paint pens last night, now I have stuff in my amazon cart waiting for payday, thanks for all the tips, slow to get everything I need.
A amazing job and looks amazing and a great paint job and and a great video.
Thank you so much
These came out sweet! Great idea combining the bases too!
This is fantastic timing! I have an Invincible figure all printed and was looking for some tutorial videos yesterday, which there weren't any
Glad to be your inspo dude
Invincible is awfully visible for being invisible.
Hahaha why is it so hard to say that word. Was easy to say off camera but I gave up trying to fight it when the red light was on.
Invincible is a hard word? Like someone is invincible?
Great job! I like the way you merge both! Came out good.
Thanks dude.
insane. great job as usual. ill be definatly checking out this patreon. i love invincible and these models are awesome
They were really well sculpted. I enjoyed working on them
You are an inspiration to me. I just started with the airbrush thing but I suck big time. Well I think I need to practice and practice. Thanks for this amazing video.
Deck Tan drinking game! Take a shot of Bailey's every time you say Deck Tan! lol!!
Don’t, you may die
Greetings from Brazil, I'm a big fan of your work and I managed to learn a lot from you!
Another top notch job, thanks for the tip about no pinkle on the dudes, my upcoming cowboy would have been very cowgirly if I didnt know that. 😎✌
Bloody hell Brent great idea for gap filling.that's been added to the bank😂.. Wait for the moaners.... They'll be coming soon my friend... Great job
We love em. They keep our views climbing!! Haha also dude I shove all sorts of crap into gaps then seal them over with glue and resin hahaha
Fancy seeing you here! I just recently found your channel the other day and instantly subscribed. Your Alien prints are what got me hooked lol.
@@rothgamez great to hear mate 👍👍👍👍
Your model painting skills are the best on RUclips, no lies. 💪
I either got a badly mixed Deck tan from Vallejo or something else, because I could never use it as a white
Absolutely crushed it!!! Thanks brother for the amazing work you do!
Hi man nice new Patreon, I'm thinking into joining its the 15$ tier the complete one?
Thanks dude. I hope everyone loves your models and you spoil them all with fantastic pixels to print in their digital model forming machines!
Looks fantastic! Love the way you used butt wad to join two models together. Looks amazing!!
Nice work really enjoy watching your builds
I keep trying to look through your videos on how to make pinkle. As much as I love your videos and watching your style of painting. I would love to just stumble upon it 😂
Think the first mention of it was in the world of Warcraft video.
@@Groundeffected thank you so much, if you sold it in your online store, I’m sure it would fly off the shelf’s. I know I’d buy it.
seu trabalho é top demais !!!!!!!! sucesso amigo !!!!!!!!!!!!!!!
I love this guy😂
my bottle of Deck Tan looks pretty grey. I am not familiar with the characters in this video. Excellent work! You make it look easy.
Amazing work...as always 👏👏👏
Wow love how you do these.💯💯💯👌👌👍👍
Groundeffected, you had me rolling when you were using the ultraviolet light.
Because we all gonna die or my super dope rave glasses?
I hear a South African accent and I am here for it!
Awesome stuff, man!
AMAZING JOB!!!!
Congrats!
Hey DAD! just a pointer on not wasting supports on the interior of hollow models. When u hollow out the model make sure u do infill but change the infill from 30% to 5% This will basically make the model hollow with like 1 or 2 supports inside that act as infill and when u add supports it thinks that the model is solid and will not put supports inside the hollowed out pieces! Amazing work!
Thanks. I just prefer doing supports to be sure I don’t have any weird stuff happen. I like to be in control of the failures haha better safe then sorry
Having internal supports is generally considered a bad idea due to the supports potentially inhibiting proper full curing of the inside.
Water curing might get around the issue, but I'd rather completely avoid the possibility of uncured resin inside of a model by limiting supports to only internal islands.
UVTools is your friend! It's crazy how useful it is, and how much it can detect and correct on sliced models that seem just fine to print otherwise.
This man speaks truth, but I usually bump it to 10% ill have to try 5%
@@AuntJemimaGames yeah that's the reason i do the 5% infill to keep slicer from putting the internal supports. the supports trap so much extra resin and if not cure will eventually make the resin fail, but to each their own if he still wants to have slicer put internal supports. I've never had a piece fail with 5% infill. Actually learned all this from The Creative Collector channel
@@Groundeffected np to each their own. at 5% u still get some support inside. Really the only reason a hollow piece will fail is if u mess the wall thickness too much i keep mine at 1.5. If u are going to continue to let slice put internal supports be sure u got a good uv peen to cure all those supports so model wont fail in future. Just some advice to help take it or leave it :)
That’s not how you paint skin tones. That’s not how you fill gaps. That’s not how you dance while waiting. Now that’s out of the way Happy New Year Brent. Congratulations on 50k on here and Instagram 🤘🔥🎉
Buying some Deck Tan!
Inspired to continue on to my second Resin Figure (and third since they're a set). Adding a comment for your algoridamajig.
Do it!!! You got this. “Each time you make poo you get closer to gold!!” -your dad 2024
Awesome work!!! I think if you didn’t print the base it might have been easier to combine them using software like nomad.
invincible is his name 😉
Still enjoying your videos Dad.
Nice painting, love your videos. What’s you layer height?
great tip on the white stuff aka toilet paper
Haha it’s the simple things!
Amazing
you painted the gloves blue ! i only know cause he told me because I did a similar thing by painting the boots yellow
i obviously made this comment before you eventually said it in the video
Haha that guy!!! Just out here looking for incorrect hands and boots!! At least I’m not the only chop who didn’t pay attention to the colour references.
remember "The Great TP Shortages" of '21 - with all those in-store aisle clearing rampages and epic battles for the last roll? ....do you recon we can blame that on 'hobbyists'...and "Collectable 'Constructors'"?
Would love to see you paint the scarlet spider from wicked.
Need tutorial on the dance for curing resin.
I am watching to learn how to paint better, but the base, bro, you know you can overlap them in the slicer and print as one right?
I like the cut of your skib
Fantastic as always. Ignore the haters.
Haha thanks secretly we love them tho they keep us entertained.
Awesome job as always! If you don’t mind me asking, what compressor do you use for your airbrush set up?
reprint the base over lapping in the slicer next time??
Yea that’s a gooderer idea hahaha
Hi dad, once again a masterpiece , but what I love over all is that you add well are human and so some cleaning of your airbrush and do some mistakes.
By any chance, could you please tell us once again, what white are you using?
Cheers big ears mate!
So the white is actually deck tan. I don’t think I mentioned it in the video but deck tan is reallly good to use in place of white because after you use deck tan you can put white over the deck tan to make it stand off the deck tan a little bit.
A other question Breennnnnnnnnt, what size needle do you use on yo Airbrizzle? Thanks mcdaddy
0.5mm my dude.
i tried to do it i almost died with the smoke :)
nice works on resin models.. can i hire you to do Rogue (this time from xmen evolutions)
excuse me what what is kind of material resine that can be painted ? is like any kinds ?
Curse you Dad! - now I have to join another Patreon and get a gallon of Deck Tan!
Haha I am so sorry. This dude has his model choices on point tho. And he comes from our side of the patreon fence so he should know what we want and he says he’s gonna deliver it.
Alas ill never know what this video was about
I have a challenge for you, Dad. Can you paint a model only using one set of paints? Perhaps the Game Color Vallejo 16 Colors for Fantasy Figures, for example. To show what can be achieved at beginner level with starter paint sets.
I’ll one up your challenge and say it doesn’t matter what paints you use dude and I’ve done a video about this already ruclips.net/video/T3_MCxI6HRw/видео.htmlsi=lebW3KQagmid9AUG
I just re watched that video hahaha man my videos really sucked back then I didn’t even clean the supports off that hair hahaha😅
@@Groundeffected you're also cheating with oil paints :p lol
What the hell is pinkle? Cracking job though
Haha it’s a magical colour used to undercoat skin tones for ladies
Don't you have issues using super glue over paint, and not directly to the resin?
Hi do you still use the UniFormation GKtwo Resin Printer 8K for your prints? I am looking to get a resin printer and would like some help on which ones to look at. Was thinking of getting the Creality Halot Mage pro but seems like it has a lot of cons. Great video and i enjoy all your content so much
Yes dude I live my gktwo!! Esp now I’m the winter. If you have a warm space then also look into the mighty 8ks that’s a really cool machine for a good price too
I just discovered your channel some days ago when I decided to buy the Uniformation GK two and I need to see more of your videos but I have a big question which class of resin do you use for the statues ? Is 8k resin don't matter that this one is fragile? Or is abs like resin?
Sorry to be a pain but what is the best Matte clear coat and gloss you use?
Happy New Year Matey.
Galleria matt varnish and I just use the cheap gloss for sprays and the army painter one for eyes. It’s not super glossy tho
Hey Your Dad, you post great content.
Thank you 🙏
where i can buy those?
Hi what is « dectam »?
My problem is, when I paint my resin prints the acrylic paint comes off easily. I scratch it with my nails and paint comes off. How to make acrylic paint more resistant against scratching? Also can be washed off with water, terrible.
Do you wash your prints
Hey dad question. Do you have a video to thin the paints?
I'm a noob who use just contrast like paints and dry brush because i get the airbrush clogged all the time.
Yea I do actually check far back dude. Like 2 years ago
Thanks @@Groundeffected
Anybody know of a more affordable Folkart or Apple Barrel alternative to deck tan?
It’s the formula dude. Not many things come close to deck tan. Swear to god best few bucks you’ll ever spend and it lasts ages.
Which glue you uses
Super glue
If i get a dollar for every time you say deck tan . I would have a lot of dollars now 😂. That brand should sent you that paint for free😂
Dude we’d all be friggen rich haha
BLEH!(metal noise)
what number paint brush are you using for eyes??????????
Uuhhhh I think it’s 000
Why do you make saying Invincible sound so hard 😭
You know, you really should try using Deck Tan instead of white.
For real though I’m gonna order some in
The printing and painting is meh but the commentary is ehhh excellent! ❤😂
Never Glue painted on painted surfaces.... always scrape the paint away so you have proper adhesion... is that one of the mistakes??
Nope I scraped and scored it.
LMAO!
first
Hahaha yes lad you show that contrast guy…
complaining here to complain.
日本語での質問大丈夫ですか?
Sure ✔️
@@Groundeffected 様
勿論って事だと思いますので質問失礼します。
ch登録して勉強をさせてもらってます。
毎回、3Dprinterで制作してる物は営利可能なんですか?
@@user-co1bk7rq9gas long as you not using copyright you can. I don’t sell any of the models I make I just print and paint them and keep them. Some custom requests for custom painting but never make a production of them.
@@Groundeffected様
返信ありがとうございます
また、お互いに時差があるのに御対応ありがとうございます。
作った物を売るのはダメって事ですね?
@@user-co1bk7rq9gthat is a grey area. Basically if you don’t own the ip you cant sell them. If it’s original and you have permission from the sculptor then you can. However if someone wants to pay for your time to paint their printed statue that looks like a recognized character I think you’re ok as long as you are not making with intent to sell. But I am not a lawyer and in reality I don’t sell any of my statues unless they are originals, I do however paint on commission bases time to time for custom collectors who want specific custom statues they can’t get otherwise. A lot of people have custom sculpts made that no one will ever get to print and they have one of a kind statues commissioned.
This has to be one of the most annoying videos I’ve ever listened to.
Agreed, not sure why he's putting that voice on, but it's fucking irritating.