Haha I didn’t want to do that!! Luckily I got it first time. Just used a really really small amount of paint almost just a dirty brush and brushed it loads before paint even came off onto the model
ive just started in this and watched many videos, i dont comment much on youtube, but you sir are TALENTED and deserve the praise. I hope sponsors read this and support you, i subscribed for sure and after seeing your vids appreciate your tips and talent! kuddos!
Dude, this is incredible. Thanks for the great tips, links, all of it! New to the channel, and now a faithful friend, and subscriber. Much love for all you do dad!
@@Groundeffected I lost my beloved wife of 48 years and watching your videos have also helped me through a very emotional upheaval and gave me a chance to distract from the outside world and rediscover a love for art. Thanks again and when I am more settled I would love to be a paying member
@@robertlock7181 ah man that’s exactly what it’s all about dude. I’m glad to be the shoulder to lean on when you needed a distraction. Keep painting the pain away my dude!!! You got this. And thanks for supporting my dude.
Turned out great! Although not my personal favourite incarnation of Harley, can't deny VX Labs turned out another banger here! For securing things like those pigtales I'd pin them myself. Most of my big prints involve either lengths of paperclips, cocktail sticks and bamboo skewers for removable parts rather than magnets. But you do need to decide that prior to printing, in order to subtract the pinning-holes from the model first.
Beautiful sculpt and paint . I like watching other people sculpt and paint . It reminds me im not by myself when im going through it . One thing i would never film myself sculpting and painting its too distracting hats off to all who dont mind filming thanks. Happy creating............
It’s tough. Damn camera dictates where you can hold the model and slows everything down cos your arms are so far away from your body but you get used to it eventually
Great video, always a pleasure to watch. Could you cover some of the printing stage in a future video? Any advice on preparing the files for printing, the printing itself and the prep before painting would be awesome. Thanks for posting these videos, the content is fantastic.
Absolutely I do plan on making a video like this probably a couple to be fair. For now there are a couple supporting videos to watch if you wanted to see my process over there just check out the printing playlist.
OMG! What a great job on the paint. You make it look so easy and those fishnets would be hard for me to do. And the tattoos are good too. Now I know why you didn't want to do this model for a while. LOL. Keep up the great work!
Great work as always. Thank you for pointing out how you delt with the tattoos and writing on the bat. Also I hate sculpted eyes too. I always appreciate designers that include two head options, sculpted and smooth eyes.
Really useful video, many thanks for this.I will try to use the same process on my Ray Skywalker and then I will test Harley Quinn . Models from VX Labs are amazing
Stunning work as always dude :) I can honestly say that I haven't seen a single video of yours that I didn't like. Amazing and keep up the great work :)
Thanks man hopefully one day I can afford my own resin 3D printer really interested in the hobby. Just recently got a filament printer this actually makes me regret getting it instead of a resin printer.
watching a backlog of vids now. this guy is the best painter doing youtube vids. thank you man!
always a pleasure to watch a pro paint
Those freehand tattoos and how you did the stockings are amazing Brent. Another fine video sir
Thanks a lot my dude
His name is "Yhordhad"
You have an incredible talent, and it's always a joy to see all the models you paint. Would love to own one of you pieces
I use your eye technique on all my figures. Thank you so much for that. Brilliant!
It’s simple but super effective
I love this ViD and Harley. Way to get it Groundeffected!
Absolutely beautiful!! Good job Mate.! 🥇🏆
DUDE! now that is a super awesome paint job! You make it look so easy, but I re-did those fishnets like 12 times lol. Thanks for this video man!
Haha I didn’t want to do that!! Luckily I got it first time. Just used a really really small amount of paint almost just a dirty brush and brushed it loads before paint even came off onto the model
Fantastic video bud its great to see a fellow figure painter
Man you are an artiste. Those statues are great
Love your videos my dude. Best painting youtube channel I have found, and there are hundreds of them lol.
ive just started in this and watched many videos, i dont comment much on youtube, but you sir are TALENTED and deserve the praise. I hope sponsors read this and support you, i subscribed for sure and after seeing your vids appreciate your tips and talent! kuddos!
Wow, thank you!
Excellent painting tutorial,many thanks it has upped my game.
Brilliant work, love how it turned out.
Thank you so much.
Dude, this is incredible. Thanks for the great tips, links, all of it! New to the channel, and now a faithful friend, and subscriber. Much love for all you do dad!
Welcome aboard my dude.
one of the best, thank you dad
This channel is going to explode. Im calling it now.
Such good content, man.
Haha I dunno maybe. I guess we will find out.
This guy knew !!
This guy called it!!
Love, from India
you blew my mind with the stockings
Always enjoy watching your videos and learning how to improve my current skills
Thanks dude. Glad you like them!!
@@Groundeffected I lost my beloved wife of 48 years and watching your videos have also helped me through a very emotional upheaval and gave me a chance to distract from the outside world and rediscover a love for art. Thanks again and when I am more settled I would love to be a paying member
@@robertlock7181 ah man that’s exactly what it’s all about dude. I’m glad to be the shoulder to lean on when you needed a distraction. Keep painting the pain away my dude!!! You got this. And thanks for supporting my dude.
awesone result, you have a knack for freehands
Awesome work man.
What a fantastic job!
Thank you!
Turned out great! Although not my personal favourite incarnation of Harley, can't deny VX Labs turned out another banger here! For securing things like those pigtales I'd pin them myself. Most of my big prints involve either lengths of paperclips, cocktail sticks and bamboo skewers for removable parts rather than magnets. But you do need to decide that prior to printing, in order to subtract the pinning-holes from the model first.
Yea I would’ve pinned them but I didn’t think about it till later hopefully the dude didn’t have a problem gluing them in
I'm just starting on figure painting. I've been doing vehicles for years. You are very helpful and funny too
Haha I’m glad you like dude
Beautiful sculpt and paint . I like watching other people sculpt and paint . It reminds me im not by myself when im going through it . One thing i would never film myself sculpting and painting its too distracting hats off to all who dont mind filming thanks. Happy creating............
It’s tough. Damn camera dictates where you can hold the model and slows everything down cos your arms are so far away from your body but you get used to it eventually
Man I just found your channel, and it got an instant sub from me. I have gotten more from your methods than I have from anyone else. Keep it up man!
That’s so good to hear my dude. Welcome!
Great video, always a pleasure to watch. Could you cover some of the printing stage in a future video? Any advice on preparing the files for printing, the printing itself and the prep before painting would be awesome. Thanks for posting these videos, the content is fantastic.
Absolutely I do plan on making a video like this probably a couple to be fair. For now there are a couple supporting videos to watch if you wanted to see my process over there just check out the printing playlist.
outstanding results. makes me want get to that level of sculpture painting- and a micron pen
Awesome job!!
OMG! What a great job on the paint. You make it look so easy and those fishnets would be hard for me to do. And the tattoos are good too. Now I know why you didn't want to do this model for a while. LOL. Keep up the great work!
It’s a lot easier than it seems I promise maybe just print half a leg to test it on first ?
@@Groundeffected *Very nice work....From one artist to another I salute brother. Question: Is she available for purchase?*
Another nice work bro! I admire the time you put in to the details such as the eyes and the baseball bat.
Thanks dude. Sometimes I resent that patience of mine hahaha it can land me days worth of doing one minor detail.
Great work as always. Thank you for pointing out how you delt with the tattoos and writing on the bat. Also I hate sculpted eyes too. I always appreciate designers that include two head options, sculpted and smooth eyes.
Yea defo. Eyes are easier when they’re smooth. I prefer placing them myself
Awesome job Dude ! I love Harley ! The tats look great. I will be getting this one !
Man, that came out beautiful.
Really useful video, many thanks for this.I will try to use the same process on my Ray Skywalker and then I will test Harley Quinn . Models from VX Labs are amazing
Hope it all goes great for you dude!!
Mate your painting is awesome
Great job, amazing !I have print Harley at bigger scale on my 3D Raise pro 3 and I will follow your work.thanks for your jobs
Stunning work as always dude :) I can honestly say that I haven't seen a single video of yours that I didn't like. Amazing and keep up the great work :)
Thanks dude. Much appreciated
Your fine detail is next level 👍
Awesome job dude, you've got yourself a new subscriber.
Great video and amazing paint job!! I’ve got a few prints from VX labs and after seeing this video I’m going to get Harley!!
She’s a tough one to paint but she does look cool.
Amazing 🎉 that's awesome work 👏 looks stunning 😊
Thanks man hopefully one day I can afford my own resin 3D printer really interested in the hobby. Just recently got a filament printer this actually makes me regret getting it instead of a resin printer.
that model is absolutely awesome. i sure wish i had a 3d printer
Thanks a lot for all the great information!
Looks amazing.
Great job.
Thank you dude
Totally awesome dude!
Glad you liked it
@@Groundeffected I dabble in painting myself. Nothing on your level but I enjoy it.
Great work and I have learnt a lot from this, I am currently doing a variation of Harley, thank you.
That was impressive!
Thank you so much
yet another couple of words enjoying all the vids
Thank you those words make all the difference!!
Great video, thanks
Thanks for watching.
Incredible! A true masterpiece.
Thank you
Enjoy watching you creating magic!
Thank you my dude.
Great model, great paint job
I love your work and your presentation style
Mad as a box of frogs but I LOVE IT
Sooo jealous of your talent
Always impressed with your content!
Thank you
Wow you are really talented. This is wonderful work.
such a lovely model to paint, she looks amazing 😊
Thank you very much dude.
beautiful work
Thank you
Super clean Brent, stunning work man! HQ 4ever 😁
Thank you bro.
Thanks for sharing your knowledge
Absolute pleasure
You are crazy .. Awesome work
such a killer job on this bro! some amazing tips in this, thanks for all the hard work man
Thank you for watching bro.
Stumbled onto your content by chance, holly Crap, you’re amazing! Keep up the good work
Brilliant as always !!
Great video!! Thank you!
Glad you liked it!
Incredible work, well done.
Awesome job on this.
Keep it up man!
Amazing work man! Climbing to the top!
Thank you bro. We still got a long way to go but thanks for being on the train while we chug to the top haha
Brother….. you are a beast!!!
That looks sick mate
So talented!
Noice one man. This is great.
Great video mate! Love the way you explained the hose!
Haha thanks dude.
Fantastic job
thats sick man fish nets cool hand scribing great
Thanks my dude.
Outstanding Tutorial ✌🏼
Great video! 👏🏻
Best tutorials out there love it 👍👍
Haha thanks man
Good pointer on the fishnets, I have tried that in the past but either used too much paint or not a soft enough dry brush
Defo too much paint. It took a good few passes before any paint even showed up on the model.
the fact the like button glows when you say click it is kinda sick.
Another excellent job done. Love your work and how you explain it.
Amazing work as ever. Wow.
Thanks so much.
Always inspiring!
Thank you 🙏
So awesome!
Bro you killed it.. subbed..
Thank you dude.
Nice work man
Thank you my dude.
Wow fantastic
This looks amazing man. Superb! You’ve definitely gained a sub :)
Thanks dude
Very nice video and paintwork 👌 Keep it comming, cheers
couple of words...DONE!😁
Thank you for the words dude.
Top work sir
Awesome as always 👍👍👍👍
Just wow
Awesome video! I learn more with every post!!!
Beautiful work!
Damn Bits! Another smashing piece Brent! I have to start getting into putting magnets in since I currently just glue everything.
Thank you dude. Yea magnets are great especially for the printing process too. Just takes a little brain power figuring them out sometimes.
100% agree with you regrading sculpted eyes, you can get much more character out of a portrait if you get to place the eyes where you want.
Yea I don’t like them to be sculpted. But it’s ok I made it work in the end.