Came here to be angry about this video claiming to paint models in 20 minutes. Figured out it was instead about painting models for 20 minutes. Great job!
of course zoomers are angry, when are you never complaining? (especially westerners) can you even hear yourselves? youtube was originally a website to upload free random stuff like cat videos, its FREE videos, no one owes you anything yet you have to leave angry comments because they don't meet YOUR specific opinions/ideology, jump into the video, watch, if its not your thing leave, whocares what it claims or not claims what the title states, "how DARE this doesn't mean my expectations" (as you insult a random stranger) typical westerner, its like instagram, if there's cute animals jumping a rope, you people have to say its animal abuse (face palm)
This model looks so damn good! One thing I love about your videos is that you share the paints (by showing the actual bottle) you use. Thanks, Brent. Your videos rock, my dude!
Excellent, as usual, sir. You have a way with gore that keeps it from being over-bearing and yet expresses the violence of the character perfectly. Thank you for sharing!
Absolutely love it! I stubbled across your channel after getting my first 3d printing and looking for inspiration on painting plague-infested skin in large figures. Love the words and the painting still looking for the plague-infested skin but your pinkly might just be where I need to start. Thanks
Interesting choices on the flesh tones! I never would have tried that combination on my own and I didn’t think it was looking quite right while you were building it up but the end results are amazing. That model looks absolutely fantastic and makes me want to take a crack at doing a Red Sonja.
Absolutely love these videos. Your techniques are simple yet have beautiful results. Finding Groundeffected and CA 3D studios has been a game changer in modelling. I can't wait to unlock ALL of the models that CA 3D studios has available to supporters. There are so many and they are all exquisite!!! Thank you all for the great content! On a side note, it is interesting to see so many paints and washes that I already use for armor modelling such as the ammo metal and tamiya wash. Quick tip on the wash, it is an enamel so if you do happen to get it somewhere you don't want, some enamel thinner will clean it up without ruining the acrylic paints underneath! Mud splatter techniques used in armor modelling would also work well for blood splatters. Add some paint to the brush, dab excess off, then use a toothpick to pull the bristles back and let them fling onto the model.
It is such a privilege to watch a master practice their craft. Your video showed up in my YT recommendations and I am so glad it did. Liked and subscribed. I am transitioning to the world of retirement and was thinking about what comes next. I have several statues and figures, but they are all bought. The idea of creating my own and then developing them through the painting process is very compelling. I will watch all your videos and learn all that I can. Thank you for sharing your passion and your creations.
MIG 191, MIG 194, MIG 195, one of these three would be my guess, probably the 195 yet the three colors are almost identical when painted on. A good tip is when you buy paints, either write down their ID numbers in a notepad or simply categorize them with photos. I label my paints holder with their model numbers on each paint holder slot to avoid these situations. Great job, as always, love the work. Your the only YT painter that I can sit through the entire video without skipping, etc. Your my fav model painter and I love all your vids.
That model looks badass! What a masterpiece! I’m just getting into 3d printing and I never really painted models before it seems really overwhelming for me.
damn, i really need to learn this way of painting, my painting of sculptures always ends up like a mess. You got yourself a new subscriber. Keep it coming buddy, i love it.
I use a old toothbrush for splatter, drawing my finger over it. I use it for mud on vehicles (sometimes mixed with baking powder for thickness) or thinned black for oil drippings. I also did it for the spots on bamboo trees. It can be used for the small spatters of blood too.
@groundeffected I'm looking to get a Elegoo Mars 5 Ultra and am wondering if it's too small of a 3D printer to do these types of prints. Build size is 153.36 x 77.76 x 165 mm³, is this enough or should I look at getting something bigger?
So Glad I stumbled on your channel. Model kit builder as a kid and wanted to get back into the hobby. WoW! STL Resin Printing is ... AMAZING!! Just got my first printer station Mars Ultra and I'm having Fun Fun Fun learning all of this. Hope to be as good as you one day a goal to strive for. Your talent is inspiring, Thanks for sharing.
Love CA 3D, as soon as I joined, I suggested a Cyberpunk Ciri in the Discord, and now we're getting one!! Great work on Red Sonja, she's one of my favourite characters.
Incredible, I had to pause the video in many places to take in all the detail, that chaotic blood spatter made all the difference. Another inspirational classic, thank you (and thank you).
Bro I just wanted to paint a low poly cloud strife statue, came here for tips, and just got completely side tracked watching the whole thing. Incredible work!
Another get model! Do you cure your parts just a bit? Easier to remove supports and other little imperfections and give the parts a complete cure after?
I remove supports and usually any bits I can see with gloves then I cure for a short time and then clean up the parts and then cure them again after brushing with alcohol because I don’t want any little bits in my paint or on the surface. It’s a long job but it’s worth it
This was fantastic it brought me back to getting my filament printer back up and running. Plus it reminded me to restart my ching ching saving for that beautiful resin printer the GK-Two. Awesome models you have printed and painted. Thanks for sharing your Dad. XD
Great job you did there, congrats! By the way, I don't know if you mentioned it before but I would like to know what brand/model of airbrush and compressor you use. Thanks
I don’t know anything about 3d printer but love your work my question is where do you buy the blueprints to make the se action figures ? Is there many website for this or people selling them
I just bought a 6th scale April O' Neil figure from someone and I was wondering how long does it take to print something like that? This is a custom figure that will also be painted
hi, can you tell me the name of the knife you used for the scratch model? no matter how much I looked, I found model scalpels with a thin blade everywhere
Came here to be angry about this video claiming to paint models in 20 minutes. Figured out it was instead about painting models for 20 minutes. Great job!
I was angry too!!😡 but yes, I love his painting technique!!
of course zoomers are angry, when are you never complaining? (especially westerners) can you even hear yourselves? youtube was originally a website to upload free random stuff like cat videos, its FREE videos, no one owes you anything yet you have to leave angry comments because they don't meet YOUR specific opinions/ideology, jump into the video, watch, if its not your thing leave, whocares what it claims or not claims what the title states, "how DARE this doesn't mean my expectations" (as you insult a random stranger) typical westerner, its like instagram, if there's cute animals jumping a rope, you people have to say its animal abuse (face palm)
This model looks so damn good! One thing I love about your videos is that you share the paints (by showing the actual bottle) you use. Thanks, Brent. Your videos rock, my dude!
Excellent, you knocked the eyes out of the park. Love this model and great job. thanks again
Glad you like it!
Excellent, as usual, sir. You have a way with gore that keeps it from being over-bearing and yet expresses the violence of the character perfectly. Thank you for sharing!
I'm just starting airbrushing but I hope one day i'll half as good as you. That's just amazing
By far MY FAVORITE!!! Love this Character!!! Makes me really want a 3D printer now!!!
I don’t remember any of the movies but I read some comics when I was younger I mostly remember the covers!
Absolutely love it! I stubbled across your channel after getting my first 3d printing and looking for inspiration on painting plague-infested skin in large figures. Love the words and the painting still looking for the plague-infested skin but your pinkly might just be where I need to start. Thanks
Interesting choices on the flesh tones! I never would have tried that combination on my own and I didn’t think it was looking quite right while you were building it up but the end results are amazing. That model looks absolutely fantastic and makes me want to take a crack at doing a Red Sonja.
Souf Afrrikan?
Absolutely love these videos. Your techniques are simple yet have beautiful results. Finding Groundeffected and CA 3D studios has been a game changer in modelling. I can't wait to unlock ALL of the models that CA 3D studios has available to supporters. There are so many and they are all exquisite!!! Thank you all for the great content!
On a side note, it is interesting to see so many paints and washes that I already use for armor modelling such as the ammo metal and tamiya wash. Quick tip on the wash, it is an enamel so if you do happen to get it somewhere you don't want, some enamel thinner will clean it up without ruining the acrylic paints underneath!
Mud splatter techniques used in armor modelling would also work well for blood splatters. Add some paint to the brush, dab excess off, then use a toothpick to pull the bristles back and let them fling onto the model.
It is such a privilege to watch a master practice their craft.
Your video showed up in my YT recommendations and I am so glad it did. Liked and subscribed. I am transitioning to the world of retirement and was thinking about what comes next. I have several statues and figures, but they are all bought. The idea of creating my own and then developing them through the painting process is very compelling. I will watch all your videos and learn all that I can.
Thank you for sharing your passion and your creations.
Was about to go searching for a video like this, and there it is sitting right in my home feed.
MIG 191, MIG 194, MIG 195, one of these three would be my guess, probably the 195 yet the three colors are almost identical when painted on.
A good tip is when you buy paints, either write down their ID numbers in a notepad or simply categorize them with photos.
I label my paints holder with their model numbers on each paint holder slot to avoid these situations.
Great job, as always, love the work. Your the only YT painter that I can sit through the entire video without skipping, etc. Your my fav model painter and I love all your vids.
bloody talented fella ! amazing - hank you for sharing your talents
Hulk. What size brush to paint eyes? Where to get it from? What kind of airbrush and paint tip please?
02 for eyes iwata airbrush 0.4 tip
excellent Idea with the blood splatter love your work
Turned out incredible thanks for sharing!
Amazing. Red Sonja looks awesome
That model looks badass! What a masterpiece! I’m just getting into 3d printing and I never really painted models before it seems really overwhelming for me.
damn, i really need to learn this way of painting, my painting of sculptures always ends up like a mess. You got yourself a new subscriber. Keep it coming buddy, i love it.
Spectacular! Thank you for the very detailed explanations!
I love Red Sonja and love how you painted that model... Subscribed!
Thanks for the sub!
I use a old toothbrush for splatter, drawing my finger over it. I use it for mud on vehicles (sometimes mixed with baking powder for thickness) or thinned black for oil drippings. I also did it for the spots on bamboo trees. It can be used for the small spatters of blood too.
Just finding your channel, I got a Saturn 3 ultra. I hope I can get some nice prints out of it. Your paint work is amazing!
Those flesh tones and the boots are cool. Nice looking model man.
best Red Sonja I have seen so far, and the the Gold thingy is a shield.
That looks perfect.
Fantastic Staute and Paint!!!!! Awesome
I'm across the pond in Ireland, and the cold is killing my prints! might look into this!
I'm a bit of a clumsy painter, so blood effects come natural. Love the paintjob (as usual), the skin and leather look amazing!
Oh sweet! I saw this STL just recently and thought it looked cool. I'll save this video for watching later. Thanks 😊
Boy does she look pissed. Great techniques. I am snagging the pink/purple thing.
Had to subscribe after watching a couple videos. Great work dude!
@groundeffected I'm looking to get a Elegoo Mars 5 Ultra and am wondering if it's too small of a 3D printer to do these types of prints. Build size is 153.36 x 77.76 x 165 mm³, is this enough or should I look at getting something bigger?
Hello word box old friend... I agree about CA 3D sculpts they are great and also represent a VERY good value.
another excellent paint job, love the commentary. for a second there, i was worried you were gonna paint the sack as an actual nutsack lmao
What a skill man! So amazingly everything you did here... I can't believe the quality
All I can say is WOW!!!
That Rogue statue is awesome. Do want 😊
Love the subtle SAFFA humor. great vid mate.
holy crap that is an amazing work. +1 sub to you sir!
Yep, just fantastic
Amazing models and painting, you got a New subscriber
Thank you !
siiiiiiiiiiick, absolutly stunning
Excellent work as usual dad
another banger... great work bro.
So Glad I stumbled on your channel. Model kit builder as a kid and wanted to get back into the hobby. WoW! STL Resin Printing is ... AMAZING!! Just got my first printer station Mars Ultra and I'm having Fun Fun Fun learning all of this. Hope to be as good as you one day a goal to strive for. Your talent is inspiring, Thanks for sharing.
Absolutely stunning
you've outdone yourself!
Wow ! I think that's your best paint job thus far .
That was sick thanks !
Always enjoy these vids!.
Love CA 3D, as soon as I joined, I suggested a Cyberpunk Ciri in the Discord, and now we're getting one!! Great work on Red Sonja, she's one of my favourite characters.
Это великолепно просто! Красавчик! Я получил огромное наслаждение от просмотра👍
Thanks dude.
That Spider-Girl in your collection. I need it. Did you make the file to print it, or did you download it from somewhere?
Incredible, I had to pause the video in many places to take in all the detail, that chaotic blood spatter made all the difference.
Another inspirational classic, thank you (and thank you).
you inspired me to make my own figurines and paint them thank you :)
Absolutely amazing my friend 👍🏻🇦🇺
Love watching your videos!!
amazing job, amazing model.
Thank you very much!
beautiful work 👌
Bravo Laddie!
An impressive job well done my friend.
Tom Cesarz
I.L.M. Retired
I really enjoy your videos.
I have Red Sonja on DVD. Cool to see this model made.
Amazing work! Love your videos.
Excellent work as always. I have her scheduled to print this weekend. Th eyes and the blood splatter really add intensity to this model.
Very impressive! I'm glad I found your channel.
Bro I just wanted to paint a low poly cloud strife statue, came here for tips, and just got completely side tracked watching the whole thing. Incredible work!
You’re at the top of your game son! 👏🏻
You’re the king of painting models. Awesome work man
Awesome job. I really love how you do the flesh tones. I have to try your method and see what result I get.
Kinda excited to see how Raven turns out now!
Amazing! What scale was this printed in?
Words in the little box. For The Rythms of Algo(tm) and Gran.
AND FOR GREAT JUSTICE! SPOOOOOON!
For gran!!!
Another get model! Do you cure your parts just a bit? Easier to remove supports and other little imperfections and give the parts a complete cure after?
I remove supports and usually any bits I can see with gloves then I cure for a short time and then clean up the parts and then cure them again after brushing with alcohol because I don’t want any little bits in my paint or on the surface. It’s a long job but it’s worth it
Damn sweet ! Awesome paint job as always. Keep on inspiring me to improve my techniques too.
Amazing. Thanks for the video.
How does someone learn to do this stuff. I’ve always been fascinated by painted models but I have no idea where to get started.
You dont use air varieties of vallejo? I noticed you used normale ones. Do you thin them all ? Thank you
This was fantastic it brought me back to getting my filament printer back up and running. Plus it reminded me to restart my ching ching saving for that beautiful resin printer the GK-Two. Awesome models you have printed and painted. Thanks for sharing your Dad. XD
I’m looking into getting a 3D printer. Does this one cure the models as well as print them?
That was so COOL vary well done ,always look forward to seeing your videos outstanding work as always ,100% enjoyed thanks for the look.
No, thank you for the look haha 😂
Great job you did there, congrats! By the way, I don't know if you mentioned it before but I would like to know what brand/model of airbrush and compressor you use. Thanks
Oh it is in the description. Nevermind me then. Cheers, man.
Haha glad you found it
amazing loving the videos
I've learned so much from your videos! Just having trouble getting Vallejo paint in South Africa :(
I don’t know anything about 3d printer but love your work my question is where do you buy the blueprints to make the se action figures ? Is there many website for this or people selling them
They are linked in the description of this video
Awesome, I will use your work to help me paint my version of Red Sonya!
Looks fantastic! Worth a sub.
Crazy good as always
Thank you my dude!
love this red sonja
I just bought a 6th scale April O' Neil figure from someone and I was wondering how long does it take to print something like that? This is a custom figure that will also be painted
Beautiful work
what scale did you print Sonja? great video
Nice finish
You r so talented
hi, can you tell me the name of the knife you used for the scratch model? no matter how much I looked, I found model scalpels with a thin blade everywhere
Big fan mate ...awesome work
I need that Red Sonja in 1/4 scale!!! Do you do commissions?
Your work is amazing
Love ca3d studios.
How do you get all your parts to fit so clean. I am always filling gaps between parts