This is one of my top 10 favorite shell kits, so far every shell, and this kid has a lace effect and they hit hard great effects overall can’t beat it. I got mine for 80 bucks once again great demo brother keep up the great Contant.
@@JoelRobinsonPyrotechnics I have them going up during a RWB segment on the 4th :) Then going into willows. I have had them for almost 10 months now waiting for the 4th LOL
Haha, I edited out all the lift times so that the video would fit under one minute, plus going for the ASMR vibe. All the shells were shown breaking in the video though.
On my fan racks I do the pace I want down one side then do the gray .25 sec a foot across the other 2 to get all 3 off at same time I like the 3 brakes at once or close 😂
I made huge metal racks with tubes and i use consumer grade shells only cause thats all i can get legally and i fuse them and lut on a huge show every 4th and new years. All ndighbkrs pitch in shells and i send out a lost of what brand and type of shells for everyone to buy and then i fuse cakes together as well and make a good 45 minute show and the total cost is around 7k in fireworls total from everyone pitching in. And the fire work stand we go to ks church ran and all lroceeds go to helpthe church ad homless ppland so what ever you soend you can get that same amount in fireworks for freeand any fire work ypu wamt its buy kne get ine free but you dont have to get he same exact firework twice
Actually, zip ties take longer and do not improve anything in the process. I purposely used slower fuse to see each shell instead of sky puking the entire thing.
@@JoelRobinsonPyrotechnics worked great no doubt! We double zip tie and use pink and yellow fuse. Just a little less time between shots. we had issues with tape failure a lot. Great display anyhow! I love fireworks no matter the chaos or masterpiece!
@@rogermiller2350 As long as the shell fuse is making good contact with the trunk line fuse, you'll be good no matter your securement method. I usually use faster fuses for finales in shows, but not so much on demos
10 seconds per foot fuse... Why all the cuts in the footage... There should have been more than enough time to show them all launch and burst without all the cuts...
Actually no. You are limited to 1 minute with RUclips shorts. That is also the whole point behind the shorts. If you want longer-form content, I have TONS of videos that are not spliced down to a minute.
@@jp-ul4fw lol, well you can thank RUclips for requiring videos to be under 1 minute. The 2 sec lift on every shell ate too much time. The not-so-edited video lives on TikTok.
Nice but I hate how they say 5 inch, 6 inch etc. Those aren’t 5 inch shells no 1.4 consumer grade firework is 5 inches. 5 inches LONG maybe but that’s a big difference than 5 inches wide.
This is one of my top 10 favorite shell kits, so far every shell, and this kid has a lace effect and they hit hard great effects overall can’t beat it. I got mine for 80 bucks once again great demo brother keep up the great Contant.
Thanks man! Yeah this is a solid kit all around
Oh just loaded these yesterday to send up on the 4th!!! I really can't wait to see them in person now!!
All some type of R/W/B theme too! Not bad shells
@@JoelRobinsonPyrotechnics I have them going up during a RWB segment on the 4th :) Then going into willows. I have had them for almost 10 months now waiting for the 4th LOL
That was trippy lol
Haha, nice! Had to edit the lifts down to fit the entire thing into a 1 minute video lol
That editing job was awesome keep it up
Thanks man, appreciate it!
Such a sic edit!
Thank you!
the editing was perfect!
Thank you, glad you liked it!
I noticed you are using a 12 shot rack with spacers, have you changed your mind on rack construction compared to your older videos on mortar racks?
I am slowly moving all my racks over to spacers. I had a muzzle break in a recent video and it kinda solidified spacers for me.
Nice ty Joel 🏆 👴 🐕 🚜 🤠 🕺 🏆 🙏🙏
My pleasure!
That taping speed though!
Haha, perfect thing to edit quickly!
How do you know how long to make the launch tubes?
These ones I bought, and I would recommend doing the same. I have a video all about mortar tubes, but HDPE DR11, 12" length is the standard.
Great shells but that was weird. It looked like a bunch of shells went up but then didn’t break or way delayed
Haha, I edited out all the lift times so that the video would fit under one minute, plus going for the ASMR vibe. All the shells were shown breaking in the video though.
On my fan racks I do the pace I want down one side then do the gray
.25 sec a foot across the other 2 to get all 3 off at same time I like the 3 brakes at once or close 😂
For an actual show, I would fuse down each row and not zig zag like I did here. I only do that when I'm doing demos.
Don’t know if you done this firework but it’s called crackle mania from AFW
I have not recorded it, but I am familiar with it! Solid piece
That was a interesting edit lol w vid though
Had to edit it down to fit in the one minute timeline lol
Very nice very beautiful 👍👍👍
Thank you!
How much does that cost?
I picked these up wholesale for $52
@@JoelRobinsonPyrotechnicsfrom where?
Good Shells....8/10
Wher did you buy them
These are available at tons of retail locations, but I picked them up wholesale at American Wholesale Fireworks.
Someone should do a lil how to video to make that shell tube holder
I have one on my channel and there are many other's out there too. You can also buy the rack if you didn't want to make it.
nice 1
Last I checked those were 8 inches sir
More like 1.75" diameter and 5" in length with at least an inch of dead space under the cap lol
I made huge metal racks with tubes and i use consumer grade shells only cause thats all i can get legally and i fuse them and lut on a huge show every 4th and new years. All ndighbkrs pitch in shells and i send out a lost of what brand and type of shells for everyone to buy and then i fuse cakes together as well and make a good 45 minute show and the total cost is around 7k in fireworls total from everyone pitching in. And the fire work stand we go to ks church ran and all lroceeds go to helpthe church ad homless ppland so what ever you soend you can get that same amount in fireworks for freeand any fire work ypu wamt its buy kne get ine free but you dont have to get he same exact firework twice
That sounds like one heck of a firework show!
Got some bang to it
It might be easier if you use little zip ties but thats what I do
I haven't zip tied in probably 10 years. There isn't any added benefit to zip tie vs taping.
Five grand Well spent
Ten grand perfectly spent.
Zip ties instead of tape and faster fuse
Actually, zip ties take longer and do not improve anything in the process. I purposely used slower fuse to see each shell instead of sky puking the entire thing.
@@JoelRobinsonPyrotechnics worked great no doubt! We double zip tie and use pink and yellow fuse. Just a little less time between shots. we had issues with tape failure a lot. Great display anyhow! I love fireworks no matter the chaos or masterpiece!
@@rogermiller2350 As long as the shell fuse is making good contact with the trunk line fuse, you'll be good no matter your securement method. I usually use faster fuses for finales in shows, but not so much on demos
thats 3 inch in dm. maybe 5 in length
Not even close to 3" diameter, 1.75" is a standard consumer canister shell lol
@@JoelRobinsonPyrotechnics better than nothing.
Try to get these to germany😂😂😂
10 seconds per foot fuse... Why all the cuts in the footage... There should have been more than enough time to show them all launch and burst without all the cuts...
Actually no. You are limited to 1 minute with RUclips shorts. That is also the whole point behind the shorts. If you want longer-form content, I have TONS of videos that are not spliced down to a minute.
those aren't 5" shells
Wtf did I just watch 💀💀💀
12 shells fused together lol
@@JoelRobinsonPyrotechnics the editing is horrible😂😂🤣
@@jp-ul4fw lol, well you can thank RUclips for requiring videos to be under 1 minute. The 2 sec lift on every shell ate too much time. The not-so-edited video lives on TikTok.
Worst shells ever!!!!!
Lol I don't know about that. They hit well, all RWB effects, and not overpriced.
Bs
Nice but I hate how they say 5 inch, 6 inch etc. Those aren’t 5 inch shells no 1.4 consumer grade firework is 5 inches. 5 inches LONG maybe but that’s a big difference than 5 inches wide.
Totally agree. 1.75" diameter, 4" length with another 1" of cardboard dead space lol
More like 1.5 inch.
You ever put any in the trunk of someone’s car?
Like when you buy them and take them home? lol