Lol , you are very thorough on what each product can do. But you should show an example of say a hood for each product that we would need to use. I feel like the C line would work on my car but then when I go and look at it . I start to doubt my self and thing maybe I need the V line lol.
Omg thank you for this video! I was so confused by all of these and what to use and when. For the V line, what Do u recommend pairing as a polisher? For example, would I use V36 after cutting with V32?
Awesome video, where do C4 and P4 rank in the V line of polishes? For example does C4 fall somewhere in between V32 and V34, does P4 fall somewhere in between V36 and V38? Thanks in advance!
My 2016 truck was repainted three years ago and the paint is in great shape with no swirls but just a couple of moderate scratches and no dents (knock wood). If I use compound to buff out those scratches, do I need to compound the entire vehicle before polishing and waxing? My challenge is the small time windows provided by Colorado's hot summer weather (with unforecasted light rain bursts in the afternoon), and the fact that my truck doesn't fit in my garage. Would greatly appreciate your advice!
Love all your products and they do work but what about when your car is outside unused and it rains and when it’s done raining and the sun dries the water on the car you now have water marks.
Water spots from rain aren’t as likely to leave heavy stains in the clear coat, most of those should wipe off with a spray wax or a quick detailer. It’s the hose water and sprinkler water that have high alkaline levels in them, and those alkaline deposits are what dry to the clear coat and are hard to get off. For the water spots that don’t wipe off, try the chemical guys water spot remover gel, it works great!
I have a 1990 jet boat (fiberglass) i had a guy wet sand it and treat with "ceramic coating" but it still looks oxidized. I want to try the phase 5. What do you recommend for a polish and also what can i use to clean after each river trip. I use hot suace right now to get rid of water spots . Thanks and great video
To all of the professionals out there that may read this or anyone that maybe this that has been detailing for quite a while Chemical Guys usually don't reply to any messages that I post now they may do that for you guys but not for me I have a question for this community of detailers What do you recommend using for paint that is how would you say the clear coat is starting to fade and not be shiny anymore and losing its luster even though you may polish it other compounds but still can't get the luster to be restored rashine
Joey I just recently purchased the 17 product unit Torqx and the entire vss lineup however why do I get dried pieces of vss every where I'm confused yes using CG pad lube and so on..thanks man
I have a black honda with minor scratches in some areas, a little deeper scratches in other areas. Which steps would I take to insure that all the scratches will be removed? And what exactly to use for this process and to protect the paint job from the elements for a better shine.
Just took over a detail business and man I been updating everything w your product and man what a difference in a wash 🧼 hoping to work more w you people in future
So i can just use p4 its basically the same as vss right? Because my paint aint bad i would like to polish it and get it looking real good was thinking of using meguiers compound and then nufinish car polish but dont wanna cut to much clear coat
Overrated my ass. Ion care what any reviewer says. I love all chem guys products. You have to follow the steps. And take ur time for great results I love u guy ❤
We would recommend checking out our Nonsense All Purpose Cleaner which is an extremely versatile cleaner which can be used on a multitude of surfaces and can be diluted to provide different levels of cleaning power. www.chemicalguys.com/nonsense-cleaner/SPI_993_16.html
Hello - I have a 2013 Ford Mustang GT - the color of the car is black - it has very light scratches and swirl marks. What type of polish would you recommend?
We recommend inspecting the pad after doing each section to ensure it's still clean. If it get gunked up with product or contaminants then we would recommend washing it in between panels.
What do you recommend for single stage black paint? Medium scratches from some idiot who decided to wipe the winter storage dust off with a dry T-shirt?
Love these kind of videos 👍🏼 class is in session
Glad you enjoyed the video!
Thanks a lot for explanation !! This will help me to choose the good product
Enjoy your detailing products!!
Love the how to clips, I see an auto stacker behind you❤, use to import Bendpak here is Oz.
😃 That's awesome! Thanks so much for tuning in!!
Great info! Thank Joey and CG Crew!
Happy detailing!
Lol , you are very thorough on what each product can do. But you should show an example of say a hood for each product that we would need to use. I feel like the C line would work on my car but then when I go and look at it . I start to doubt my self and thing maybe I need the V line lol.
Thanks so much for your feedback!
Omg thank you for this video! I was so confused by all of these and what to use and when. For the V line, what Do u recommend pairing as a polisher? For example, would I use V36 after cutting with V32?
Awesome video, where do C4 and P4 rank in the V line of polishes? For example does C4 fall somewhere in between V32 and V34, does P4 fall somewhere in between V36 and V38? Thanks in advance!
C4 would have a similar cut to something along the lines of V34 and P4 would act as more of an in between V36 and V38.
@@ChemicalGuys So C4 cuts through p2000 sanding scratches?
My 2016 truck was repainted three years ago and the paint is in great shape with no swirls but just a couple of moderate scratches and no dents (knock wood). If I use compound to buff out those scratches, do I need to compound the entire vehicle before polishing and waxing? My challenge is the small time windows provided by Colorado's hot summer weather (with unforecasted light rain bursts in the afternoon), and the fact that my truck doesn't fit in my garage. Would greatly appreciate your advice!
Love all your products and they do work but what about when your car is outside unused and it rains and when it’s done raining and the sun dries the water on the car you now have water marks.
Water spots from rain aren’t as likely to leave heavy stains in the clear coat, most of those should wipe off with a spray wax or a quick detailer. It’s the hose water and sprinkler water that have high alkaline levels in them, and those alkaline deposits are what dry to the clear coat and are hard to get off. For the water spots that don’t wipe off, try the chemical guys water spot remover gel, it works great!
I have a 1990 jet boat (fiberglass) i had a guy wet sand it and treat with "ceramic coating" but it still looks oxidized. I want to try the phase 5. What do you recommend for a polish and also what can i use to clean after each river trip. I use hot suace right now to get rid of water spots . Thanks and great video
Thanks
Happy detailing!
To all of the professionals out there that may read this or anyone that maybe this that has been detailing for quite a while Chemical Guys usually don't reply to any messages that I post now they may do that for you guys but not for me I have a question for this community of detailers
What do you recommend using for paint that is how would you say the clear coat is starting to fade and not be shiny anymore and losing its luster even though you may polish it other compounds but still can't get the luster to be restored rashine
Joey I just recently purchased the 17 product unit Torqx and the entire vss lineup however why do I get dried pieces of vss every where I'm confused yes using CG pad lube and so on..thanks man
After I use VSS do I still need to apply a layer of wax to the car?
What compound will take off embedded bug stains on front of hood…
I have a black honda with minor scratches in some areas, a little deeper scratches in other areas. Which steps would I take to insure that all the scratches will be removed? And what exactly to use for this process and to protect the paint job from the elements for a better shine.
Compound with a microfiber pad
Just took over a detail business and man I been updating everything w your product and man what a difference in a wash 🧼 hoping to work more w you people in future
Super awesome! Stoked to have you part of the Chemical Guys family!
So i can just use p4 its basically the same as vss right? Because my paint aint bad i would like to polish it and get it looking real good was thinking of using meguiers compound and then nufinish car polish but dont wanna cut to much clear coat
Overrated my ass. Ion care what any reviewer says. I love all chem guys products.
You have to follow the steps. And take ur time for great results
I love u guy ❤
Thanks so much for being part of the Chemical Guys family!!
Get these products today! 👇
V-Line Compounds & Polishes
bit.ly/42AczGb
VSS Scratch & Swirl Remover
bit.ly/42jS93O
Phase 5 Fiberglass Polish
bit.ly/42iqkZS
C4 Compound
bit.ly/44pYAEz
P4 Polish
bit.ly/44kEwDn
If I have the c4 and p4 and also the v4, do I need to have the vss? Or I’m okay with those, c4, p4 and v4? Thank you CG
What’s the best supplies for cloth seats, vinyl dash/doors, and rubber?
We would recommend checking out our Nonsense All Purpose Cleaner which is an extremely versatile cleaner which can be used on a multitude of surfaces and can be diluted to provide different levels of cleaning power.
www.chemicalguys.com/nonsense-cleaner/SPI_993_16.html
In order to remove a ceramic coating from a car is V38 with a white pad enough, or would I need to use V36 for some cutting?
Hey! An abrasive is necessary to remove ceramic such as V36 or even a compound like V34.
Hello - I have a 2013 Ford Mustang GT - the color of the car is black - it has very light scratches and swirl marks. What type of polish would you recommend?
Hi there! Remove light swirls and scratches by machine polishing with a White Hex-Logic Pad and P4 Precision Paint Polish.
Do I need to clean my pad after each section? Or do you use the same pad for the whole car then clean?
We recommend inspecting the pad after doing each section to ensure it's still clean. If it get gunked up with product or contaminants then we would recommend washing it in between panels.
What do you recommend for single stage black paint? Medium scratches from some idiot who decided to wipe the winter storage dust off with a dry T-shirt?
Hi there! Try using a light polish such as P4 Precision Paint Polish with a White Hex-Logic Pad.
What happen to loyalty points. There is not a section anymore for them and i had points
Hi there! Please contact our Customer Service team for assistance.
www.chemicalguys.com/sfcc-contact-us.html
Can I go from v32 to v38, or should I use v36 before v38?
Hey! It is necessary to refine with V36 before using V38.
Can I ever skip from V34 to V38?
Hi there! It is best to refine V34 using V36 before a final polish with V38.
I think I seen a cracked bumper up there
Thanks so much for tuning in!