For holding the glass in you should look at using glaziers points, usually dirt cheap and if you ever have to replace the glass it's a lot easier to remove them, especially if the glass breaks.
I want to congratulate you on your video is very simple and easy to make, I have seen many and only give you measures tips and way to do. you do it right you're a smart girl
Some great tips in there for my upcoming bathroom cabinet project, thank you!! Thought I'd share a couple of my own (well, from people who have lots more experience than me!) - Use silicon sealant beading instead of glue for glass, as it gives the glass more flex. - Gluing edge-edge grain is stronger without dowels (or biscuits), and if gluing end grain, use mitre joints with dowels or keys so the dowels don't bury directly into the edge grain, where it can splay. If you're worried that the boards will slide when clamping without dowels, a pinch of salt along the join will prevent that.
I'm really liking this design. I think if you shrunk it down you could put it on top of a double vanity to give some separation. Obviously you'd need to have a decent size double vanity to do so, but would look awesome.
I might be blind but do you have a video on your trick for cutting crown molding? Yours always look perfect! If you don't have one you should put one together, there is a lot of us who would benefit from it. Love this cabinet you built, I have watched this several times in anticipation of building one. Thanks for sharing you are an inspiration! Your talent shines in your projects! Have a beautiful day
Thank you so much!! I don’t have any tricks to crown molding...just a lot of practice. Basically, you set the saw to 45, flip the crown upside down and cut. The most important part is making sure to hold it so the flat pieces on the top and bottom are perfectly flush against the fence and the bottom plate of the miter saw. No tricks! There’s tons of videos out there on it already 😉😄
The large latch is a bold and beautiful choice. It is a nice contrast to the "lightness" of the window panes. And the simple raised panels are a great choice too.
Great cabinet. If you use a little bit of painters tape and tape up the hole on the dowel jig that you won't be using, it will prevent mistake holes. Hope that helps.
I am so glad I found your channel!!! Your videos are perfect, the music doesn’t overpower your voiceover, you describe everything clearly and your work is beautiful! Excited to binge watch your channel 😁
All the hard work you put in and how beautiful it turned out I pray for whoever gave this a thumbs down. Every project is unique specially working with wood no project will ever be perfect but this was amazing job and anyone that would be a critic is just mean. You can give advice where you think something would be better but to take the time to click the thumbs down I pray that God will soften your harden heart before its to late! Great Great Job Shara you are inspiring, GOD BLESS:)
Beautiful project. Great job of putting the video together also. There was one cringe worthy moment and that was when you glued the glass in place. Potential pain if it needs to be removed or replaced. Would recommend glass retainers. Easy to make with your skill set. Thanks for a great video!
To install glass of that size, use quarter-round molding and silicone glue. Instead of one large sheet of glass, you could have installed smaller panes of glass. If a break or crack occurs, it would be much easier and cheaper to replace a small pane of glass than one large one. Instead of glue, use silicone and/or glazing. Glue increases the likelihood of a glass break or crack. You need to allow the glass to flex and move a bit. Silicone is flexible. If you don't want to use molding to hold your smaller panes of glass, use a trowel or putty knife to push window spikes into the wood at a few strategic locations.
Great advice. However I’ve installed several glass panels in a few of my pieces and they’re still holding up great. Nothing loose. Nothing cracked and nothing broken. One of them I built about five years ago 👍
I don't normally subscribe to any channels, only to 3 so far, but really enjoyed last few of your videos which gave me some great ideas on how to do things I'm planning to build, so you deserve another subscriber!! Thanks for the videos.
Omg you amaze me each project! Good job Shara and thanks for sharing. Commented to quickly, I’ve never heard of a Cremone bolt. That thing is awesome, reminds me of something you’d see in a Victorian piece yet with your cabinet it enhances in that modern way. I really enjoyed the methods of joinery you share and the details of Cremone bolts and other hardware, metals just bring it to the next level. I can’t wait to see what else you have in mind and the bolts and details you come up with in later projects because honestly, the cabinet is gorgeous already but when you installed the Cremone bolt it elevated it to a one of a kind for me. Something way off topic, I’m wanting to add in a mitre station attached to my garage wall but one that stores moveable cabinets underneath, (Ana White teamed up with ryobi to build garage shelving that also stored mitre saw/table saw tables that rolled out yet when put together all heights met up for multi purpose function for ie: a storage table was same height as table saw to join and make a safe out feed table with storage) anyways, because I’m short I’d have to make movable tables shorter to fit under a shorter than normal workbench so I can comfortably stand and use the workbench. I saw a solution to adjustable height tables/cabinets by installing a scissor jack onto the work table either at the bottom or top to adjust to the height needed. Curious your take on an adjustable height work table that could be rolled and stored under a workbench/mitre station that’s attached to a wall? Way off topic Ik, but the concept is fascinating and problem solving for us non gigantic builders that struggle with heights, lol embarrassing problem standing on tippy toes lmao! Curious your thoughts or take on something like this. Love this build you’ve just made, its high quality all around and again that Cremona bolt... damn!!! Top level ;)
Great job on this! Could I make a suggestion? The voice over pace seemed a little fast, especially in the first part of the video. Slowing down just a tad would be helpful. But, great job on the video and the build!
@@GeometricMason I'm all for people working hard and making money from their craft. I made a suggestion, you're unnecessarily criticizing. Adding a smiley face at the end doesn't lessen that.
Top rate skills & application, excellent results! Did seem as if you were on a time schedule with regard to voice over, a little difficult keeping up. Anyway, great job!
For holding the glass in you should look at using glaziers points, usually dirt cheap and if you ever have to replace the glass it's a lot easier to remove them, especially if the glass breaks.
I respect that you include mistakes, along with ideas on how to fix them. Helps me not panic when building my own projects. Keep up the good work!
The loved the idea of gluing the wood together to get 11/2". And that was very extraordinary work
I want to congratulate you on your video is very simple and easy to make, I have seen many and only give you measures tips and way to do. you do it right
you're a smart girl
Some great tips in there for my upcoming bathroom cabinet project, thank you!!
Thought I'd share a couple of my own (well, from people who have lots more experience than me!)
- Use silicon sealant beading instead of glue for glass, as it gives the glass more flex.
- Gluing edge-edge grain is stronger without dowels (or biscuits), and if gluing end grain, use mitre joints with dowels or keys so the dowels don't bury directly into the edge grain, where it can splay. If you're worried that the boards will slide when clamping without dowels, a pinch of salt along the join will prevent that.
Exactly what I was looking for!! We will modify to make it twice as wide and use in our family room. Thank you!!
Yay! That will look awesome! Happy building!
I'm really liking this design. I think if you shrunk it down you could put it on top of a double vanity to give some separation. Obviously you'd need to have a decent size double vanity to do so, but would look awesome.
joel thoenen that’s a great idea! This would totally work in a smaller version for the middle section of a double vanity 👍
God willin I will follow this video step by step and build this for my wife one day:)
Happy building!!
Very nice! Like how you used simple 1 x 2's as trim on the sides. Don't let my wife see this. She will want one.
Thank you! Haha maybe you should build one and surprise her 😉
Good job Shara
Thank you!
Speechless Wow. This exactly what I want for my living room. God bless you and your beautiful family.
I might be blind but do you have a video on your trick for cutting crown molding? Yours always look perfect! If you don't have one you should put one together, there is a lot of us who would benefit from it. Love this cabinet you built, I have watched this several times in anticipation of building one. Thanks for sharing you are an inspiration! Your talent shines in your projects! Have a beautiful day
Thank you so much!! I don’t have any tricks to crown molding...just a lot of practice. Basically, you set the saw to 45, flip the crown upside down and cut. The most important part is making sure to hold it so the flat pieces on the top and bottom are perfectly flush against the fence and the bottom plate of the miter saw. No tricks! There’s tons of videos out there on it already 😉😄
I always find your projects top-notch quality, always something I'd like to do for myself.
I really appreciate that! Thank you!
The large latch is a bold and beautiful choice. It is a nice contrast to the "lightness" of the window panes. And the simple raised panels are a great choice too.
I love this. Found a design similar a year ago. Have a old pie cabinet like this I'm going to do this with.
That sounds like an awesome project!
love the hardware it added a farmhouse classy touch
Thank you! That’s my favorite part! 😁
That came out awesome.
3x3Custom - Tamar thanks Tamar!!
It never occurred to me that I could fit a door inside a cupboard rather than in front of it. Your design looks really stylish! Thank you :)
Great cabinet. If you use a little bit of painters tape and tape up the hole on the dowel jig that you won't be using, it will prevent mistake holes. Hope that helps.
I am so glad I found your channel!!! Your videos are perfect, the music doesn’t overpower your voiceover, you describe everything clearly and your work is beautiful! Excited to binge watch your channel 😁
Amanda thank you so much! I so appreciate that and I’m so glad to have you following along
Thanks so much for the information and application on the cabinet. You really made it easy to learn especially with minimal tools. Thanks 🙏🏾
So glad you enjoyed. Thank you!
Happy building!!
Excellent professional looking result.
I really like the video, the speed is just right.
a Real pro built.
Thanks
That is simply beautiful great work. God Bless.🙏🌹🌹
Thank you very much!
That’s awesome. I think I might give that a shot. Luckily I can get “scrap” 4x4 red oak at work. It’ll be fun to make the boards out of those.
this came out really nice! very classy looking.
Thank you 👍
@@WoodshopDiaries thank you for such awesome videos... it gives me great ideas and encourages me to do things outside my comfort zone
I liked your projects, a newbie here, very good and I like it, I like it, I like it, someday I will do it myself, thank you for sharing your projects
Looks like Restoration Hardware. Great Job
Thank you!
All the hard work you put in and how beautiful it turned out I pray for whoever gave this a thumbs down. Every project is unique specially working with wood no project will ever be perfect but this was amazing job and anyone that would be a critic is just mean. You can give advice where you think something would be better but to take the time to click the thumbs down I pray that God will soften your harden heart before its to late! Great Great Job Shara you are inspiring, GOD BLESS:)
Thank you! I appreciate your kind words!
Beautiful work.
Shara you are such an inspiration!
Thank you so much! 💕💕
Such a gorgeous piece 😍
Yess! This build is awesome and so are you. 😍
Beautiful. Nice work Shara. Lots of nice details.
Thanks so much!
Beautiful project. Great job of putting the video together also. There was one cringe worthy moment and that was when you glued the glass in place. Potential pain if it needs to be removed or replaced. Would recommend glass retainers. Easy to make with your skill set. Thanks for a great video!
Really beautiful piece! A lot of work went into this and it really paid off. Thanks for sharing the process and outcome!
Well Done Shara, Nice build.
Thank you!
Such a good look with the glass.
Around the House thanks so much! I really love how it turned out!
To install glass of that size, use quarter-round molding and silicone glue.
Instead of one large sheet of glass, you could have installed smaller panes of glass. If a break or crack occurs, it would be much easier and cheaper to replace a small pane of glass than one large one.
Instead of glue, use silicone and/or glazing. Glue increases the likelihood of a glass break or crack. You need to allow the glass to flex and move a bit. Silicone is flexible. If you don't want to use molding to hold your smaller panes of glass, use a trowel or putty knife to push window spikes into the wood at a few strategic locations.
Great advice. However I’ve installed several glass panels in a few of my pieces and they’re still holding up great. Nothing loose. Nothing cracked and nothing broken. One of them I built about five years ago 👍
Beautiful build. Thank you for sharing your time and talent!
More people need to discover your channel! Good build
Noah R. Thank you!
Nice work. It looks great.
I'm glad you like it!
I started to watch this woodwork diy your so amazing
Shara definitely talks a lot slower these days! LOL. LOVE the build!
very elegant.
Thank you 👍
Beautiful job!!
I don't normally subscribe to any channels, only to 3 so far, but really enjoyed last few of your videos which gave me some great ideas on how to do things I'm planning to build, so you deserve another subscriber!! Thanks for the videos.
Awesome! Thanks...I appreciate that!
Looks great ,I wanna do one but with a modern twist keep up the good work. ..
This is just beautiful!
Beautiful
Thank you 👍
I don't know how I've not found you before but I loved this video and instantly subscribed! Great job!
What a beautiful cabinet! Thanks for sharing this .
So gorgeous!!!
Cool lookin’ cabinet, nice design.
Thanks!
This has to be my favorite thing you have built!! I love the door and that latch is so cool : ) Love your videos so far : )
Thanks so much! So glad you enjoyed it! 😊
Very nice and good job shara.
This thing turned out awesome, pat yourself on the back
for doing such a good job!
Thank you so much!
Wow! Just gorgeous💕! The build is awesome too
Thank you!
You do great work this looks amazing
Thank you 👍
WOW GREAT JOB SIS !
I would recommend glue blocks behind your crown mold so it’s reinforce. 😉
1st time viewer
I would have appreciated more detail on that Cremone Bolt including the install
Nice project idea
I think you just screw it in place... and done. sure looks cool though!
what a piece and what a gal
Great work! This cabinet is really beautiful.
Omg you amaze me each project! Good job Shara and thanks for sharing. Commented to quickly, I’ve never heard of a Cremone bolt. That thing is awesome, reminds me of something you’d see in a Victorian piece yet with your cabinet it enhances in that modern way. I really enjoyed the methods of joinery you share and the details of Cremone bolts and other hardware, metals just bring it to the next level. I can’t wait to see what else you have in mind and the bolts and details you come up with in later projects because honestly, the cabinet is gorgeous already but when you installed the Cremone bolt it elevated it to a one of a kind for me. Something way off topic, I’m wanting to add in a mitre station attached to my garage wall but one that stores moveable cabinets underneath, (Ana White teamed up with ryobi to build garage shelving that also stored mitre saw/table saw tables that rolled out yet when put together all heights met up for multi purpose function for ie: a storage table was same height as table saw to join and make a safe out feed table with storage) anyways, because I’m short I’d have to make movable tables shorter to fit under a shorter than normal workbench so I can comfortably stand and use the workbench. I saw a solution to adjustable height tables/cabinets by installing a scissor jack onto the work table either at the bottom or top to adjust to the height needed. Curious your take on an adjustable height work table that could be rolled and stored under a workbench/mitre station that’s attached to a wall? Way off topic Ik, but the concept is fascinating and problem solving for us non gigantic builders that struggle with heights, lol embarrassing problem standing on tippy toes lmao! Curious your thoughts or take on something like this. Love this build you’ve just made, its high quality all around and again that Cremona bolt... damn!!! Top level ;)
JewDd* 89 aww thank you!! You’re the best 💕 I so appreciate you watching!
Turned out great! Very nice job!
Thank you!
This is so beautiful! Thanks for sharing!
Great video, fantastic build and explanation during. Thanks
Excelente proyecto felicitaciones eres muy buena,
🤗🤗😉👋
Thank you 👍
Great job
Thank you!
Absolutely love this build! 🎉🎉🎉
Thank you 👍
excellent work
Great job on this! Could I make a suggestion? The voice over pace seemed a little fast, especially in the first part of the video. Slowing down just a tad would be helpful. But, great job on the video and the build!
she has to talk quickly to get in all the paid product placements. :)
@@GeometricMason I'm all for people working hard and making money from their craft. I made a suggestion, you're unnecessarily criticizing. Adding a smiley face at the end doesn't lessen that.
Great piece! I would like to know where you got the dowel rod jig. Thank you
all your projects are great, enjoyed all your videos
Great build
This cabinet is smart. And beautiful😍
Excellent work! Looks great!
Very nice!!
Thank you 👍
good one Great job
Thank you 👍
Top rate skills & application, excellent results! Did seem as if you were on a time schedule with regard to voice over, a little difficult keeping up. Anyway, great job!
Wow another awesome build you have talent.
So lovely
You are incredible!
You’re too kind. Thank you!
Great work.......
Thank you 👍
Wow, really nice work
A beautiful piece of furniture!
Wow Thts beautiful
Thank you 👍
Love this video. You explain things in good detail. You just got a new subscriber 👌👌👌
Keep up the good work.
You should be proud very beautiful 👍
Thank you so much!
this is a great video. lovely project and great looking end result.
this is AMAZING!!!
Beautiful, so nice!
How am I just now coming across this channel..?
Subscribed.
Awesome job! Love all of your work!!
H2OBungalow Home Decor & Home Improvement thanks so much!!
Great work Shara! Please share the list of tools names used.
Awesome 👌
Thank you!
Looks awesome 👏✊👍
Very nice wirk
Thank you!