U.S General series 3 72" tripple bank and top chest
HTML-код
- Опубликовано: 27 июл 2023
- in this vid i picked up my new white harbor freight top and bottom box and un pack it and talk about both the tripple bank bottom box and the top chest
Авто/Мото
Авто/Мото
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
I wanted the hutch but I have so many tools that didn't have a home. I went for the chest and i'm happy that I did.
I don't have too many yet but plan to fill this one so I get that . And so far I'm very happy I got the top chest also! Thanks for watching I appreciate it !
Sweet box! Way better underneath. Really dig the shop, it's come a long way!
Thanks bro I appreciate it ! And yeah I'm pretty sure it's going to stay under on the wall
Both boxes look awesome! I like the toolbox sort of creating the wall next to the stairs to give you the fab table behind it. Do some sort of sealant on the box now to make it wipe up and protect it long term ;)
Yeah, I'm still torn on which way to put it, but the good thing is it's on wheels so I can play with it more once I move everything in and start really settling the space up . Yeah, that's a good idea about coating it with something, I'll have to look into that and am open to suggestions if you have any for a product to try
Was gonna get the 72" top toolbox, but got the 72" top hutch and side locker instead bc i was able to save more on the 2, and if later on I can add the extension toolbox or another locker. I got everything on salee too...
72" toolbox $1349.99 - 25% off ($450)
72" top hutch $594.99 - 25% off ($105)
Side locker $299.99 - 25% off ($100)
Saved a total of $715 on the 3 pieces.
PS - I did go with Slate Grey and i had to wait 4 weeks on the box, 2 weeks on the hutch & 8 weeks on the locker.
Nice , sounds like you have a nice setup also and got some killer savings on yours . Thanks for watching and sharing your setup!
my garage is almost identical to yours, i put white metal up on my walls. wanted to see what the white box looked like against a white wall
Good deal , I personally like the look of the white box with the white walls ! Thanks for watching!
The white is real classy, and underestimated... nice box... and shop
Yeah most people immediately think it's just going to get so dirty but no dirtier than any of the other colors and imo the white with black trim really pops and for me matches well with my shop too . Thanks I really appreciate it and thanks for watching!
Dude, that white is 👌
Thanks ! I think it was the right choice for my garage lol
I like it on side wall 2nd choice your choice looks best...dude u got walls up and a/c that awesome...crazy thing is when bought my tool box it cost me 11k in 07 didn't have harbor freight I'm my area.. looks nice and so does shop...I'm jealous....is that a 40by 60 building?....
Thanks I appreciate it , yeah I'm liking it against the wall too for now . Yes 40x60x16
Looks good. As does the shop. How big is that building? 🍻
Thanks! It's 40x60x16 and the mezzanine is 40x12 and 10' floor height
What size trailer is that? Im picking up my series 3 72 with hutch in a few days and not sure if i should get the 5x9 or 6x12 uhaul trailer
I'm 90% sure it's 5x8 but I'll double check tonight when I get home
I’m kinda wondering if the charger can go in the bottom draw drill out the rivets
Yeah I thought about moving it all but haven't really looked into it yet but might eventually. Thanks for watching!
Debating on whether I should bite the bullet or not I’m skeptical about the locking mechanism reliability as I own a us general roll car and the lock seized twice on me.
Thanks for watching! Yeah I can understand that concern for sure bit I have that with most any purchase from hf haha but in all seriousness it seems like a pretty quality box ( for the money ) and especially that's its coming from hf . I'm assuming your talking about the key lock and not the drawer slide locks and if so I'm not in a position I need to lock my box or my older usg carts being in my home garage but I could imagine they'd be something that could fail over prolonged use . I can say, in my opinion, though, that the full-length drawer locks on the series 3 are much more convenient and easier to use than my series 2 cart . Well, thanks again for watching, and good luck with your choice. So far, I'm very happy with my decision to get mine
Any idea what height the lid reaches when its open? Thinking about one of these in the future but I have shelving that looks like it could interfere with the open lid.
Not off hand but I'll try and remember to get a measurement for you tonight when I get home or tomorrow morning. Thanks for watching!
@MATTP545 it's right at 87 ¼" to the highest point of the lid when open
Really appreciate you taking the time to measure that. That thing is a beast and it actually does look real nice in white.
Yeah no problem at all ! And yeah it's pretty big . Thanks !
U.s General 72" triple bank and top chest is same price like 2post 9000lbs car hoist , what is better to have?
Honestly for me having the two post lift was a better more useful thing for me but my bendpak 10apx was about 2500 more then these boxes but in the end both were great investments for my shop and I would buy them both again if I had to do it over and money allowed. Like when I got this box I put part of it on their card to save a little then sold that green datsun 620 that was in the garage to buy the lift . Thanks for watching!
Did you bolt the boxes together?
No I did not, I thought about it but it's so heavy and I don't have any plans to move it around much and even if I do it would only be in the shop so no real risk of the top box coming off
I gotta go with 26" boxes. $$$
Yeah I hear that. Thanks for watching!
@@kenschopshop got the 26" roller cabinet the other day almost half off. Guy wanted green instead of blue so he returned it. $205 instead of $400!!
@miners_treasures oh wow, that's a great deal . They are great boxes. Hopefully, you enjoy it !
What's good with the Datsun 620 I got 2
I hate to say it but I actually sold it to buy the lift I have . It was one of those things I hated to do but after spending everything I had building the shop I felt I needed the lift more , it sucks because it was a super solid truck too . Thanks for watching!
I was interested in getting the top box, but I've heard it's too tall to really see and access the open top area.
Not going to lie I love having the top chest for more tool storage but being 5'10" yes it is borderline too high for me to easily see what's laying on the mat especially towards the back so if you put small stuff like a drill bit or something it's harder to see but for larger things like my cordless tools and batteries there's no issue seeing stuff like that
Ceilings look taller 16ft?
Yep 16' walls
You may have talked me into the white. Fuck a hutch. Top box is where it’s at.
Haha, awesome. I like it a lot, and so far, it stays clean and / or cleans up easy . Yeah I understand why some might need one in the shop they work at but imo having more drawers to put tools is much better . You could always ad a side locker once they release those to take the place of the hutch . Thanks for watching! And good luck on making your decision on yours !
@@kenschopshop ordered the gray one. No hutch and no top. Don’t have the room for either.
@drgreenthumb8137 nice the gray looks really good too ! That sucks about not having the room but totally understand that ! Congrats on the new box !
I recently bought the series 3 72" roller in blue, top hutch, side cabinet, and side drawer. The roller was on sale for 300 off.
@@2015_Rubicnn nice , that sounds like a nice combo ! And always great when you can catch a sale and save !
Hate the HUTCH! 🤬🤣
Haha !
For the Icon the hutch seems to be pretty nice as a clean work area/ office, but on the US general because it is not as deep, the cover sticks out further than it should when open.