Scroll saw for beginners. Top tips to get started.
HTML-код
- Опубликовано: 25 авг 2024
- Scroll saw for beginners. Top tips to get started.
Scroll saw tips for beginners. A scroll saw is a great way to get involved in wood work and our top tips are an ideal reference for any scroll saw beginner. We share a few ideas on how to set up your scroll saw. As well as the scroll saw blades we choose to use ourselves. We also give some ideas to help you out with your own scroll saw projects and hopefully it will help you to succeed in the scroll saw projects you undertake. These are our top ten scroll saw tips for beginners. Some of our top scroll saw ideas for beginners.
We work with our own Hegner scroll saw on a daily basis and it is a joy to use, hopefully our top tips will help you get the best out of the time you spend working on your own scroll saw. The beauty of the scroll saw is it can be used to make wooden items on its own or it can be combined with other woodworking skills like wood carving to make a wide variety of unique wooden items.
For the free scroll saw patterns, please refer to the dedicated page on our workshop website by following the link below.
www.thelovespo...
Use the link below and enter the discount code: lovespoons at the checkout for a 10% discount on all Starbond products.
bit.ly/3leQt7U
For great prices on sanding belts and abrasives check out SAIC by using the link below.
www.saic-uk.co.uk
For more information about our family workshop check out our website www.thelovespo...
For regular updates about the things we are doing find us on Facebook, Twitter and Instagram by searching for The Lovespoon Workshop.
Remember to take care and ALWAYS ensure your own safety when working with wood working tools and machinery. If in doubt don't do it!!
#scrollsaw #scrollsawbeginners #scrollsawtips
Where was all this great advice when I bought my first scrollsaw? Guess that’s what I get for trusting a Welsh man for tips 😂. Excellent video my friend
I did try my best. 😂😂 Learnt some of these things after you bought the scroll saw too. Always learning, that's why we love it.
Hope all is well with you all, all the very best from us all. 👍👍
Ești un adevărat maestru !
Felicitări !
Thanks Gabi, always great to be able to share the methods we use working with the scroll saw.
Hope all is well with you. All the very best from us all. 👍👍
Excellent advice! I always enjoy your shows. Take care!
Thanks Michael, we certainly appreciate your support. Delighted to hear that you enjoyed the video.
Hope all is well with you, take care, all the very best from us all. 👍👍
I enjoy scrolling and I enjoy your videos. I have an entry level machine which I love. I am trying a variety of simpler projects whilst I am learning.
Sounds great James. From what you are describing it sounds like you are definitely on the right track.
Thanks again for supporting our RUclips channel. All the very best from us all. 👍👍
Great videos. Subcribed.
Just got the Hegner Multicut 2s. Love it. Only issue I'm having is the blades keep snapping up inside the top clamp usually after 10 to 15 min of use. No. 5 blade cutting thin birch plywood. It usually happens when I use the quick release clamp rather than the standard clamp. I assume it's something wrong tension wise but I can't figure it out yet. Any advice and tips would be hugely appreciated. Thanks
Hi Ferdia, great to hear from you and thanks for subscribing to our RUclips channel.
The first things I would check is if the tension is set correctly on the quick release clamp. I set it so the blade goes to the top of the quick release clamp. If you are doing the same then it might be the quality of blade you are using. I work with Niqua speed blades but Flying Dutchman and Pegas blades also do a great job. The only issue I have with pegas blades is they tend to slip in the blade holder, so I rough them up with sandpaper on the ends before I use them.
I would definitely suggest trying different amounts of tension on the blade. It sounds like the blade is under more stress than it should be for it to be consistently breaking after a limited amount of time.
Thank you again for supporting our RUclips channel. Hope you enjoy working with the Hegner multicut 2s, it's a fantastic scroll saw and work with. All the very best from us all. 👍👍
@@DailovespoonsThomas thanks for the reply. I first used the no. 5 blade that came with the hegner saw, then I also tried a pegas no. 5, same result, blade breaks high up in the blade clamp itself. When you ask mention the tensioning, is there a way to tension within the blade clamp itself? Could I be closing it too tight? I know it's trial and error but seen as it's the same model you use I knew you could help. Cheers, Love the channel
Hi Ferdia, thanks for getting back to me. It's possible that you are over tightening the clamp but this usually results in breaking the thread of the screw in the blade clamp. I would suspect that there is too much tension applied to the blade and this can be adjusted at the back of the scroll saw itself. Other than that it's possible that something isn't operating correctly. You're more than welcome to send a short video or photos to see if we can help sort the problem. Our email is info@thelovespoonworkshop.com
Thank you again for getting in touch and supporting our RUclips channel. All the very best from us all. 👍👍
There was one tip that you forgot about and that was to subscribe to your channel.
Thanks Mark, we leave that one down to everyone to choose. 😂😂 Hope all is well with you.
Thanks as always for your support, all the very best from us all. 👍👍