Great advice as always! I couldn't agree with you more! I spent hours watching others, buying books to read, asked a lot of questions, etc. Then I had to practice, practice, practice. It doesn't always happen over night. Enjoyed as always! Take care my friend!
Thanks Michael, hope all is well with you. We're always looking to learn new things and develop. Thanks as always for your support. All the very best from us all. 👍
Ive learnt to watch your videos there fantastic and just a bank of invaluable information and i cant thank you enough for teaching and inspiring me to get better and better 😊
Hi Micah, Great to hear from you and delighted to hear that you have found our videos useful. Let us know if you have any questions, always great if we can help out in any way. Thanks again for supporting our RUclips channel. All the very best from us all. 👍
Thank you, delighted to hear that the video was useful. Hope all is well with you. Thanks as always for supporting our RUclips channel. All the very best from us all. 👍
Thanks Mark, hope all is well with you. All good here thanks, back after a summer break. Thanks as always for your support, all the very best from us all. 👍
Sounds great, I've just changed dust masks. The new one protects the eyes from dust far better. Hope all is well with you. Thanks again for supporting our RUclips channel. All the very best from us all. 👍
@eamonnmcgreevy6665 hi Eamon, great to hear from you. I have attached a link below for you to see the mask I am currently working with. www.brit-safe.co.uk/products/jsp-force-10-typhoon-full-face-mask-to-en136?gclid=Cj0KCQiA-62tBhDSARIsAO7twbah0YEXHiViVXlGLYJ1wMzkcmZAgEoaoJvR35mI-qhHdxSnfU789BEaAgYaEALw_wcB Thanks again, all the very best from us all. 👍
Another great video! I first started my journey in woodworking with a scroll saw. My first one was a cheap brand called Skil. It worked ok for what I was doing at first, but then when I started doing more projects which required more pilot holes, I quickly found out that the quick release was the way to go. My wife bought me a DeWalt with the quick release. It was a game changer. I still use it and works great for what I do. I made my own stand from plans I purchased from some website and it works good. I do have to be careful to make sure that it is on steady ground though. I hope to be able to use it more down the road.
Hi Joe, hope all is well with you. The scroll saw is an essential tool for ourselves. We progressed in a similar way. Started with a budget machine but quickly realised it wasn't up to the job. Today the scroll saw is in daily use and I've just bought another one to use on holiday!🤣🤣 Thanks as always for supporting our RUclips channel. Always great to hear from you. All the very best from us all. 👍
It's Starbond CA glue. You'll find a link in some of our video descriptions. Thanks for supporting our RUclips channel, all the very best from us all. 👍
I’ve just come across your channel and recently got myself a scroll saw (well last December but I’ve only used it once 😂) Some great tips and stacking the wood seems so obvious but I’d never have thought of it lol Also it’s great to see another Welsh channel on here and one that’s doing so well. All the best 🤙
Thank you, delighted to hear that the video was useful. Thanks for supporting our RUclips channel too. I will take a look at your channel and see what you're up to. Thanks again, all the very best from us all. 👍
I love your videos! I am just getting started on my scroll and loving it. I am trying to find a make like yours, could you please tell me where you get yours at? Thank you!
Hi, great to hear from you. Delighted to hear that the videos are useful. I work with a Hegner multicut 2s. It's done a great job for over 20+ years. You can often find good quality Hegner scroll saws on Ebay second hand. You can find them new on the hegner.co.uk website. If you do find a good one at a reasonable price on Ebay make sure it has or you get hold of a quick release system. It will save alot of time and hassle. Thanks for supporting our RUclips channel. All the very best from us all. 👍
Great advice there’s so many scroll saws available now I agree Hegner is the saw of my choice I have tried several different brands but honestly the new design saws just doesn’t hold up to production cutting I had to try a DeWalt it they cut great and have some good features but I found out quickly they aren’t the quality of a Hegner or even some of the cheaper parallel arm saws Really great video Thanks
Hi Jerry, Great to hear from you as always. Hope all is well. The Hegner has served us well. Just bought a small one second hand to use when on holiday in Spain. Thanks as always for your support, all the very best from us all. 👍
Beautiful information. I am soooo glad I watched this. I just ordered a scroll saw. Thank you for sharing!
Glad to hear it was useful. Thanks for supporting our RUclips channel. All the very best from us all. 👍
Great advice as always! I couldn't agree with you more! I spent hours watching others, buying books to read, asked a lot of questions, etc. Then I had to practice, practice, practice. It doesn't always happen over night. Enjoyed as always! Take care my friend!
Thanks Michael, hope all is well with you. We're always looking to learn new things and develop.
Thanks as always for your support. All the very best from us all. 👍
Ive learnt to watch your videos there fantastic and just a bank of invaluable information and i cant thank you enough for teaching and inspiring me to get better and better 😊
Hi Micah, Great to hear from you and delighted to hear that you have found our videos useful. Let us know if you have any questions, always great if we can help out in any way.
Thanks again for supporting our RUclips channel. All the very best from us all. 👍
Thank you. Great and useful advice as always.
Thanks Peter,
Hope all is well with you. Delighted to hear that the video was useful.
All the very best from us all. 👍
What a great Video thank you guys very much great tips and good explained 🙏🏻☘️
Thank you, delighted to hear that the video was useful. Hope all is well with you.
Thanks as always for supporting our RUclips channel. All the very best from us all. 👍
Great information. Hope you are all keeping well.
Thanks Mark, hope all is well with you. All good here thanks, back after a summer break.
Thanks as always for your support, all the very best from us all. 👍
💪Felicitări! Un mare like 👍👍 si multa sanatate !!!
Thanks Gabi, hope all is well with you. All the very best from us all. 👍
I use a scrolnado now for dust collection on the scroll saw. It’s highly effective.
Sounds great, I've just changed dust masks. The new one protects the eyes from dust far better.
Hope all is well with you. Thanks again for supporting our RUclips channel. All the very best from us all. 👍
@@DailovespoonsThomas Thanks for sharing your knowledge Dai. Can you tell me what dust mask you're now using?
@eamonnmcgreevy6665 hi Eamon, great to hear from you. I have attached a link below for you to see the mask I am currently working with.
www.brit-safe.co.uk/products/jsp-force-10-typhoon-full-face-mask-to-en136?gclid=Cj0KCQiA-62tBhDSARIsAO7twbah0YEXHiViVXlGLYJ1wMzkcmZAgEoaoJvR35mI-qhHdxSnfU789BEaAgYaEALw_wcB
Thanks again, all the very best from us all. 👍
Another great video! I first started my journey in woodworking with a scroll saw. My first one was a cheap brand called Skil. It worked ok for what I was doing at first, but then when I started doing more projects which required more pilot holes, I quickly found out that the quick release was the way to go. My wife bought me a DeWalt with the quick release. It was a game changer. I still use it and works great for what I do. I made my own stand from plans I purchased from some website and it works good. I do have to be careful to make sure that it is on steady ground though. I hope to be able to use it more down the road.
Hi Joe, hope all is well with you. The scroll saw is an essential tool for ourselves. We progressed in a similar way. Started with a budget machine but quickly realised it wasn't up to the job. Today the scroll saw is in daily use and I've just bought another one to use on holiday!🤣🤣
Thanks as always for supporting our RUclips channel. Always great to hear from you. All the very best from us all. 👍
What was the dark colored glue you used to stack the layers of wood before cutting?
It's Starbond CA glue. You'll find a link in some of our video descriptions.
Thanks for supporting our RUclips channel, all the very best from us all. 👍
I’ve just come across your channel and recently got myself a scroll saw (well last December but I’ve only used it once 😂)
Some great tips and stacking the wood seems so obvious but I’d never have thought of it lol
Also it’s great to see another Welsh channel on here and one that’s doing so well. All the best 🤙
Thank you, delighted to hear that the video was useful. Thanks for supporting our RUclips channel too. I will take a look at your channel and see what you're up to.
Thanks again, all the very best from us all. 👍
@@DailovespoonsThomas Thank you!
I’m already writing down some ideas and tips from your other videos 👌 😎
I love your videos! I am just getting started on my scroll and loving it. I am trying to find a make like yours, could you please tell me where you get yours at? Thank you!
Hi, great to hear from you. Delighted to hear that the videos are useful. I work with a Hegner multicut 2s. It's done a great job for over 20+ years. You can often find good quality Hegner scroll saws on Ebay second hand. You can find them new on the hegner.co.uk website. If you do find a good one at a reasonable price on Ebay make sure it has or you get hold of a quick release system. It will save alot of time and hassle.
Thanks for supporting our RUclips channel. All the very best from us all. 👍
Thank you so much. I really apricate your time. I look forward to learning more from your channel! @@DailovespoonsThomas
Great advice 👍
Thanks Cindy, hope all is well with you. All the very best from us all. 👍
Great advice there’s so many scroll saws available now I agree Hegner is the saw of my choice I have tried several different brands but honestly the new design saws just doesn’t hold up to production cutting I had to try a DeWalt it they cut great and have some good features but I found out quickly they aren’t the quality of a Hegner or even some of the cheaper parallel arm saws
Really great video Thanks
Hi Jerry, Great to hear from you as always. Hope all is well. The Hegner has served us well. Just bought a small one second hand to use when on holiday in Spain.
Thanks as always for your support, all the very best from us all. 👍
Interesting, I would have thought the packing tape would have put a sticky residue on the blade and made it tacky/cloggy.
Works well when cutting hard wood and working with a blade with a low T.P.I. never had any issues with clogging or the blade becoming tacky.