FYI, don't over tighten any of those fittings, rather, tighten them by hand, give them one quarter by wrench, operate the machine, and tighten them if they're letting out water or steam (depending on station). Those are notoriously easy to break, also, they're specifically designed to only go a little bit, until they seal. Just letting you know, i've broken my fair share of them. Also, 2 stroke oil is a bit loose, you should get something of heavier weight. Like way oil, for example. The steam will vaporize any of the oil it comes in contact with if it's too thin.
@@grigorsamsa6564 US navy procedure for finding a steam leak is to wave a broom in front of yourself as you wander the halls; if the end of it falls off, you found the leak. You can replace a broom for $5 you can't replace a seaman so cheaply, especially at sea.
Johnny, you need to get some steam oil from the vendor for the in-line lubricators. The two-cycle oil is likely doing very little to lube the cylinder walls. Steam oil is designed to work in the high-pressure, high temperature environment of a steam cylinder. Remember, steam under 50 PSI of pressure is much hotter than 212º F. (100º C.). Those are beautifully made and running engines.
What does gasoline burn at? Or is the pressure more the issue at play here? We mix 50:1 for the chainsaws and blowers at work, just curious what the difference would be.
@@TheOriginalBlue62 The steam actually washes the oil off the walls of the cylinders when you use normal oil. Steam oil is made to emulsify with the steam, and remain on the cylinder walls to lubricate the rings. It’s a different environment than the cylinder of an IC engine.
This timing couldn’t possibly be more perfect. I’ve been looking up references for air engines to design my own in Blender, and I was trying to decide on the number of cylinders and their arrangement. Edit: I feel I should clarify that this is all for animation. I don’t plan on building an actual engine, but I want everything in the project to be as realistic as possible - something that could actually work if it were real.
If I recall the triple expansion steam engines are by far the most efficient and powerful steam engines known to man because of how well they use superheated steam
2 stroke oil is alright for the external parts but the cylinders really need steam oil as it's a lot more viscous and can handle the pressure and heat will help the cylinders last a lot longer wouldn't want you to ruin them as I bet they where not cheap
I’d also agree with the recommendations to use steam oil in the lubricators. I’d also recommend watching Keith Appleton’s RUclips vids on building, refurbishing and operating model steam plants. What he doesn’t know about steam engines is probably not worth knowing.
If the safety valve is rated 60 PSI, I'd run it right up to that for the extra oomph out. Looks like the little engines that could need it. They do seem to do well under load as well, as you've noticed. They don't seem to bog down near as much as the gas engines, possibly because they can always be fed power via the steam in, which can rise in pressure when bogged. Neat little engines.
I'm really impressed and amazed at how well and smoothly the machines run, and especially the three-cylinder one. Right now I wanted to buy a steam engine again (the three-cylinder of course). almost 50 years since I last bought one. Then of tin type on tin plate, and with 1 cylinder, but I had a lot of fun with it, saw and steam hammer came with the set. The other boys were very impressed. Thank you for allowing us to take part in a great demonstration and a great video.
I have a two cylinder steam engine that has only been tested with air power cause I’m still building the rest of the boiler components but I absolutely love watching all the mechanics at work at extremely low RPMs. Great vid as always 👍👍
back in the 70s my grandfather and i got an old 50s steam train from the thrift store. needed alil work but we got it going. it was fun to watch it steam run on the tracks. nice vid, ty
I love steam power! Especially the reciprocating types like these. It would be amazing to see you build one from scratch. A triple-expansion, or the rarer 4-cylinder triple-expansion would be really interesting to see. I've always wanted to build a 4-cylinder triple like the ones used on Titanic, but i simply don't have the equipment or skills required to do so. Yet. Thanks for the video!
I was under the impression the Titanic only used 3 cylinder triple-expansion engines. In fact, I've never heard of four cylinder triple-expansion engines before, would they not be called quadruple-expansion engines?
@@Kyle-gw6qp they wouldn't be called quadruple expansion because the third expansion is just split between 2 equally sized cylinders. They did this to reduce the weight/size of the third expansion components and to minimize vibration. A true quadruple expansion engine would have 4 different sized cylinders. 1 for each stage. If you want to see a really well done scale model of Titanic's engines, look up overweightarchie on youtube. He's got thousands of hours into it and it's arguably the best functioning model of the engine in existence.
Every time i see a steam engine it reminds me of the Netherland open air museum in Arnhem where they have a old milk processing plant with a working steam engine which they actively run... amazing machine 🥰 amazing place too ❤️
That 3 cylinder steam engine sounds beautiful. It’s now on my wishlist for Christmas lol. I probably would use it as a power plant for electricity or something.
Very cool Too bad they are both single expansion and since the pistons all appear to be the same diameter you probably can’t convert to double or triple expansion. Any chance you can make a condenser so you draw a vacuum across the exhausts? You may see an increase in power out put.
These engines are absolutely beautiful. Craftsmanship looks fantastic. I was a little surprised that they can't run slower than that. Especially since they're multi cylinder engines. Maybe they're not double acting cylinders if not that the reason. But if they are double acting they should be able to run much slower than that. Could be a steam regulation issue or perhaps the timing is slightly off. Could just be that they're very small cylinders also. I had a little single cylinder steam engine for a long time. Just used the sweeping style back and forth valve. And it would run quite slowly.
8:06 the brushless motor is producing around 1.5 watts of power, so the steam engine should be producing even more. Maybe there is a problem with the dyno test? (9:14) best wishes
I hold 2 jobs, machinist, and manufacturing engineer. We share a lot of the same skills, and I haven't seen u do anything contrary to industry standard. You sir are a skilled man,. I wish I could use my skills to have fun lol.
Lovely looking little engines , sound nice too. So are you going to make a condenser for exhaust gas and feed it back into the boiler via a one way valve?
I can see the exhaust condenser working - lots of stationary engines have them, but you couldn’t directly feed it back in as the water would have to be at a higher pressure than the boiler to be able to get through the one way valve. He could probably machine up an eccentric pump though, they’re common on locomotives.
@sourand jaded they can be really finicky on miniature steam engines, they’re fussy on pressure and also don’t like hot feed water - which is a problem if you’re getting your feed water from a condenser, they tend to condense the water properly but keep it a bit warm. It’s definitely possible though. Some boilers need certification in the UK and US and to get one certified you need at least two methods of water input, so there’s no reason why you couldn’t have an injector and then a hand pump for if it fails.
i like those demonstrations with the light bulb, turning LOTS OF FIRE into a tiny bit of glowiness :P shows you how inefficient energy conversion actually is.
Hi Johnny, You have inspired me to order this setup for myself. I ordered it today and it should arrive in a couple of weeks. I have a few question about what we see in the video compared to what's actually included in the kits: 1. What's the smaller vertical black cylinder for, and why wasn't it used in the build? 2. Were the holding braces for the Gas Tank included? 3. Was the brass fitting you soldered to the pipe included? 4. Is there anything else I will/might need for my setup to be functional?
Hi, I am also interested in getting this kit, but like you would like to know about what is exactly included in the kit. Could you please let me know? Cheers. Serge
I'm not surprised you didn't want to push your luck regarding the pressure on the boiler. What you could do though, is a water pressure test on it yourself, it's a lot safer to test it that way and is quite simple to do.
Silly little project for you to try. Historically most steam ships would squeeze a little more power out of their steam engines, not by heating the steam more (and risking damage/boiler explosion), but instead by cooling the exhaust through a heat exchange, with some fresh seawater. Perhaps pipe the exhaust tubing through a water bath before releasing it, and check the power again.
I would love to see the cylinders working in series. Although they probably are designed for that so it might not work well but I think that’d be cool to see.
You'll notice they have functioning valve gear, this means you don't need multiple expansion in order to improve efficiency. You just move the johnson bar closer to the center and it'll close valves early, allowing the steam to generate mechanical work by expansion. In scenario of full expansion from working pressure to atmospheric, you get maximum possible efficiency. It's basically the same as having fixed timing valves with multiple expansion cylinders that expand to atmospheric pressure, except you have an option to "overdrive" it and produce more power at the tradeoff of exhausting underexpanded steam.
So fascinated with steam engines. Insane amounts of torque, but this demonstration makes me think they could never be practical for road applications again.
the triple expansion boilers with superheating tubes really did have tremendous torque, but your talking thousands or tens of thousands of times larger than this little thing.
@@Steve211Ucdhihifvshi You caught me about two years too late to discuss this with any competence. That said, I'm pretty sure I was referring to steam cars, like the White steam car, which makes an estimated 800 ft/lb torque.
Now you need to build a scale RC steam launch. And have a little figurine crew with at least one wearing a Panama hat and drinking tea out on the deck.
Unbelievable work. Well done. But we need all of your guys with such great talent to come together and make one of these engine that creates steam from burning house hold garbage that creates virtually no smoke. And make it strong enough to that it can be attached to a generator to power a house. This would be a far more important & rewarding endeavor than likes & views. .
You know what would be really cool? To build two similarly sized model ships and install them in it. You can use the flywheel and attach a propeller shaft to them and add a propeller.
I'm sure somebody may have already said it, but: RC Titanic. Two engines powering the port and starboard 3-blade props and somehow run a generator or scale steam turbine to power the center 4-blade prop.
As beautiful as they are you're taking a step backwards with thermal efficiency. That said how awesome would it be seeing one of those in one of your cars... it could be Steam Punk themed
you could BUT then you woulld have to use a governor to keep the engines in sync with each other ... parallel and you can run two different sets of things like say a generator for lights and some battery charging ... and then bands for tools and machines like lathes or drills or sanders or saws etc ... literally a miniature machine shop run from 2 steam engines with lights and all fully functional ... ok so they are best suited for smaller parts and more likely softer metals ... but perhaps can be used to actually make the models with scale sized actual machines ...
Great video as always but i noticed something. You were able to produce 1.5 w of electrical power using a generator but you were only able to produce 1 w of mechanical power with the same engine. This doesn't seem right, maybe the dyno gives us fals results.
@@VintageTechFan a dyno is designed to test HIGH SPEED torque ... a steam engine is considered low speed torque ... so the steam engine will start fast and finish at the same speed ... while a proper engine will start slow and finish fast .... a steam engine isnt abut going fast it is about moving heavy loads and doing lots of low end muscle work ... while an engine is about constantly accelerating adding more and more speed to the power curve ... put a car engine on a jet engine dyno and the car engine looks like a peddle car ... same idea as a steam engine on a race dyno ..
I wonder if its possible to make a small steam turbine to go alongside the main steam engine, connected to a gearing system, to act as turning gear system. So in theory you could have a high pressure burst of steam, maybe lasting 5-10 seconds or so, that would spin up the turbine, turn over the pistons to remove any water, before then being able to start the main engine. If calibrated right, a governor could open the throttle valve to an idle (or maybe a "start up") setting right as the waters cleared from the cylinders, whilst also closing the valve to the starting turbine, making the start up an automatic proceedure automatic. Don't know if this would work in practice but if I had the time and tools I'd love to try and make it work. Not only is it a cool little party piece, it would also sound incredible. The hiss of steam, with the winding up whirl and shriek of the turbine, followed by the main engine sputtering and roaring into life! Edit: Doing that maths thats about 1.63 hp/L, and about 13.07 Nm/L which isn't half bad for what it is I think!
Interesting. The Liberty Ships circa WW2 used triple expansion piston steam engines because steam turbines were in short supply and were mainly used for war ships. Later in the war when steam turbines became more available they were used for the bigger/faster Victory Ships.
Is there a way to add water to the boiler while under pressure? Not necessary with butane, but handy if you want a longer run. Nice running, very well timed engines!
The sound of these engines is enchanting! Very beautiful tests you did!
Why does it sounds like a mini diesel engine
Eu não me canso de ouvir kkk
Sounds great, much better than a single. It actually sounds like a "real" engine.
@@checkerboard8382 Probably because of the long stroke
Wow. Would definitely love a steam powered rc boat
Yes and combining them to a V12 or a inline 5!!!
@@exo068 yeah that would be awesome
@@exo068 what's the point of mixing a steam engine with a V12? That kills all the magic
@@Pablotome97 no V12 steam engine because no one has build something that crazy and it would sound good I think!
100%
FYI, don't over tighten any of those fittings, rather, tighten them by hand, give them one quarter by wrench, operate the machine, and tighten them if they're letting out water or steam (depending on station). Those are notoriously easy to break, also, they're specifically designed to only go a little bit, until they seal. Just letting you know, i've broken my fair share of them.
Also, 2 stroke oil is a bit loose, you should get something of heavier weight. Like way oil, for example. The steam will vaporize any of the oil it comes in contact with if it's too thin.
Just use steam oil for live steam use, machinists oil for compressed air...
@@grigorsamsa6564 US navy procedure for finding a steam leak is to wave a broom in front of yourself as you wander the halls; if the end of it falls off, you found the leak.
You can replace a broom for $5
you can't replace a seaman so cheaply, especially at sea.
Ther eisbsteam engine oil available, wilesco sells it for their models for example
@@vaelophisnyx9873 Holy shit
@@vaelophisnyx9873 that's fucking horrifying to think about
The quality is amazing. They sound awesome too
Realy sounds like diesel truck!
it shouldnt be that noisy, it liekly is rubbing and needs lubrication.
Johnny, you need to get some steam oil from the vendor for the in-line lubricators. The two-cycle oil is likely doing very little to lube the cylinder walls. Steam oil is designed to work in the high-pressure, high temperature environment of a steam cylinder. Remember, steam under 50 PSI of pressure is much hotter than 212º F. (100º C.). Those are beautifully made and running engines.
What does gasoline burn at? Or is the pressure more the issue at play here? We mix 50:1 for the chainsaws and blowers at work, just curious what the difference would be.
@@TheOriginalBlue62 The steam actually washes the oil off the walls of the cylinders when you use normal oil. Steam oil is made to emulsify with the steam, and remain on the cylinder walls to lubricate the rings. It’s a different environment than the cylinder of an IC engine.
@@tjh44961 Nice tip!!!!!
This timing couldn’t possibly be more perfect. I’ve been looking up references for air engines to design my own in Blender, and I was trying to decide on the number of cylinders and their arrangement.
Edit: I feel I should clarify that this is all for animation. I don’t plan on building an actual engine, but I want everything in the project to be as realistic as possible - something that could actually work if it were real.
You should start with one, to get the hang of it.
designing engine in blender with polygons? does the faceting bring engineering challenges?
Cool ! A steam powered blender could heat the soup as it made it 😊
@@johnwalker194 ?
@Casix03 😂🤣😂
I love the sound of a three cylinder engine!
Three cylinders are the best. I love them too
You get an admission and exhaust on each stroke, so you’re effectively getting the sound of a 4-stroke ICC I-6 on the 3-pot!
The Future is The Past.
The 3 cylinder uses the heat more efficiently and nearly 50% more power. Just amazing. Loved this video
If I recall the triple expansion steam engines are by far the most efficient and powerful steam engines known to man because of how well they use superheated steam
I'm surprised how real that 3-cylinder sounds
Well it is a real 3 cylinder
@MAVONA$💋 you are a fire maniac
@MAVONA$💋 get a life
Now an I5 or V10 would be great🤣
Err, it IS real.
2 stroke oil is alright for the external parts but the cylinders really need steam oil as it's a lot more viscous and can handle the pressure and heat will help the cylinders last a lot longer wouldn't want you to ruin them as I bet they where not cheap
Definitely one of my biggest inspirations on RUclips 🤘
That 3 cylinder sounds a bit like a 6 inline petrol engine, I love it!!!
I’d also agree with the recommendations to use steam oil in the lubricators. I’d also recommend watching Keith Appleton’s RUclips vids on building, refurbishing and operating model steam plants. What he doesn’t know about steam engines is probably not worth knowing.
That man is a true artisan.
I didn't realize how wasteful a wood-banded boiler was. Your videos set the standard for testing small engines and I love it so much.
If the safety valve is rated 60 PSI, I'd run it right up to that for the extra oomph out. Looks like the little engines that could need it. They do seem to do well under load as well, as you've noticed. They don't seem to bog down near as much as the gas engines, possibly because they can always be fed power via the steam in, which can rise in pressure when bogged. Neat little engines.
I'm really impressed and amazed at how well and smoothly the machines run, and especially the three-cylinder one. Right now I wanted to buy a steam engine again (the three-cylinder of course). almost 50 years since I last bought one. Then of tin type on tin plate, and with 1 cylinder, but I had a lot of fun with it, saw and steam hammer came with the set. The other boys were very impressed. Thank you for allowing us to take part in a great demonstration and a great video.
I don't think I've ever liked a video in the first 20 seconds before. The sound was AMAZING!
I literally just parked at the side of the road just to watch this video now. So excited ❤️
Steam engines, wonderful things 😃❤️🔥
I have a two cylinder steam engine that has only been tested with air power cause I’m still building the rest of the boiler components but I absolutely love watching all the mechanics at work at extremely low RPMs.
Great vid as always 👍👍
These Steam motors are pieces of art 😍
They sure are. I really do like the two cilinder one.
back in the 70s my grandfather and i got an old 50s steam train from the thrift store. needed alil work but we got it going. it was fun to watch it steam run on the tracks. nice vid, ty
I love steam power! Especially the reciprocating types like these. It would be amazing to see you build one from scratch. A triple-expansion, or the rarer 4-cylinder triple-expansion would be really interesting to see. I've always wanted to build a 4-cylinder triple like the ones used on Titanic, but i simply don't have the equipment or skills required to do so. Yet. Thanks for the video!
I was under the impression the Titanic only used 3 cylinder triple-expansion engines. In fact, I've never heard of four cylinder triple-expansion engines before, would they not be called quadruple-expansion engines?
@@Kyle-gw6qp they wouldn't be called quadruple expansion because the third expansion is just split between 2 equally sized cylinders. They did this to reduce the weight/size of the third expansion components and to minimize vibration. A true quadruple expansion engine would have 4 different sized cylinders. 1 for each stage. If you want to see a really well done scale model of Titanic's engines, look up overweightarchie on youtube. He's got thousands of hours into it and it's arguably the best functioning model of the engine in existence.
I could watch you build every night! thanks JohnnyQ for being so awesome!
Every time i see a steam engine it reminds me of the Netherland open air museum in Arnhem where they have a old milk processing plant with a working steam engine which they actively run... amazing machine 🥰 amazing place too ❤️
The beauty and precision is captivating. This is the most satisfying thing I've ever watched. The camera angles are perfect and the sound is too.
That 3 cylinder steam engine sounds beautiful. It’s now on my wishlist for Christmas lol. I probably would use it as a power plant for electricity or something.
Very cool
Too bad they are both single expansion and since the pistons all appear to be the same diameter you probably can’t convert to double or triple expansion. Any chance you can make a condenser so you draw a vacuum across the exhausts? You may see an increase in power out put.
These engines are absolutely beautiful. Craftsmanship looks fantastic.
I was a little surprised that they can't run slower than that. Especially since they're multi cylinder engines. Maybe they're not double acting cylinders if not that the reason. But if they are double acting they should be able to run much slower than that. Could be a steam regulation issue or perhaps the timing is slightly off. Could just be that they're very small cylinders also.
I had a little single cylinder steam engine for a long time. Just used the sweeping style back and forth valve. And it would run quite slowly.
Absolute work of art
Gotta say, I think these steam engines are my favourite scale engines you've tinkered with so far.
8:06 the brushless motor is producing around 1.5 watts of power, so the steam engine should be producing even more. Maybe there is a problem with the dyno test? (9:14)
best wishes
It's like a transmission. Gear reduction does a lot
Thanks for sharing, now I need to get two three cylinder engines and kick out the electric motors in my rc Boat. 80 inches long,
These engines rock ! I'd really like to see a scale steam locomotive built with these or another setup
I hold 2 jobs, machinist, and manufacturing engineer. We share a lot of the same skills, and I haven't seen u do anything contrary to industry standard. You sir are a skilled man,. I wish I could use my skills to have fun lol.
Awesome video it was fun to watch
Thanks for the vid.
The addition of the dyno really is a + .
Lovely looking little engines , sound nice too.
So are you going to make a condenser for exhaust gas and feed it back into the boiler via a one way valve?
I can see the exhaust condenser working - lots of stationary engines have them, but you couldn’t directly feed it back in as the water would have to be at a higher pressure than the boiler to be able to get through the one way valve. He could probably machine up an eccentric pump though, they’re common on locomotives.
@@harryrobinson2901 I didn't think of that. Makes sense
@sourand jaded they can be really finicky on miniature steam engines, they’re fussy on pressure and also don’t like hot feed water - which is a problem if you’re getting your feed water from a condenser, they tend to condense the water properly but keep it a bit warm. It’s definitely possible though.
Some boilers need certification in the UK and US and to get one certified you need at least two methods of water input, so there’s no reason why you couldn’t have an injector and then a hand pump for if it fails.
i like those demonstrations with the light bulb, turning LOTS OF FIRE into a tiny bit of glowiness :P
shows you how inefficient energy conversion actually is.
Along those lines, a tinkerer could try to demo in miniature, heating with a heat pump vs. direct burn.
So this is how they powered the Titanic.
10:09 It funny how a 3 cylinder sound like a 6 cylinder.
Very good video👌
Wow the steam engines are pretty awesome. I am going to look into getting one. Thank you very much for a great video. 😀👍❤🇨🇦
They are pieces of art in my eyes.
The 3 cylinder sounds awesome
I Love 3 cylinder sounds❤
Great work👍
YEEESSSSSSS I have been waiting for this video!!
Hi Johnny, You have inspired me to order this setup for myself. I ordered it today and it should arrive in a couple of weeks. I have a few question about what we see in the video compared to what's actually included in the kits:
1. What's the smaller vertical black cylinder for, and why wasn't it used in the build?
2. Were the holding braces for the Gas Tank included?
3. Was the brass fitting you soldered to the pipe included?
4. Is there anything else I will/might need for my setup to be functional?
Hi, I am also interested in getting this kit, but like you would like to know about what is exactly included in the kit. Could you please let me know? Cheers. Serge
The guy is so cool, he can make me go crazy with every clip. Thank you very much for a great video to watch and enjoy. FC from Thailand 🙏🏻🇹🇭🖤🤘🏿
You can hear that distinct, bass bellow at speed. All 3s, 6s, and 12s make that sound. Not so much the V6s, but some do to a point.
I'm not surprised you didn't want to push your luck regarding the pressure on the boiler. What you could do though, is a water pressure test on it yourself, it's a lot safer to test it that way and is quite simple to do.
Silly little project for you to try.
Historically most steam ships would squeeze a little more power out of their steam engines, not by heating the steam more (and risking damage/boiler explosion), but instead by cooling the exhaust through a heat exchange, with some fresh seawater.
Perhaps pipe the exhaust tubing through a water bath before releasing it, and check the power again.
Get a 2 4 cylinder ones and make a steam powered rc titanic with it (just use a motor for the central ahead-only propellor)
Boy those are some beautiful motors. They run so smooth too.
Nice work 👍👍👍👌
I love the admission of being nervous about going up to 70psi!! Safety first.
I would love to see the cylinders working in series. Although they probably are designed for that so it might not work well but I think that’d be cool to see.
You'll notice they have functioning valve gear, this means you don't need multiple expansion in order to improve efficiency. You just move the johnson bar closer to the center and it'll close valves early, allowing the steam to generate mechanical work by expansion. In scenario of full expansion from working pressure to atmospheric, you get maximum possible efficiency. It's basically the same as having fixed timing valves with multiple expansion cylinders that expand to atmospheric pressure, except you have an option to "overdrive" it and produce more power at the tradeoff of exhausting underexpanded steam.
how does this engine sound so good!!🤤. thank you James Watt!!
Finally someone actually steaming the engines
So fascinated with steam engines. Insane amounts of torque, but this demonstration makes me think they could never be practical for road applications again.
the triple expansion boilers with superheating tubes really did have tremendous torque, but your talking thousands or tens of thousands of times larger than this little thing.
@@Steve211Ucdhihifvshi You caught me about two years too late to discuss this with any competence. That said, I'm pretty sure I was referring to steam cars, like the White steam car, which makes an estimated 800 ft/lb torque.
Nice Small I6 sound! Amazing!!!!!!!!!!
The hottest humidifier you can buy😂
Now you need to build a scale RC steam launch. And have a little figurine crew with at least one wearing a Panama hat and drinking tea out on the deck.
Super cool project, might get me one for Christmas.. 👍
Wonderful :) There's nothing like real live steam :)
Dude it would be so cool to put one of these in any vehicle
Unbelievable work. Well done. But we need all of your guys with such great talent to come together and make one of these engine that creates steam from burning house hold garbage that creates virtually no smoke. And make it strong enough to that it can be attached to a generator to power a house.
This would be a far more important & rewarding endeavor than likes & views.
.
You know what would be really cool? To build two similarly sized model ships and install them in it. You can use the flywheel and attach a propeller shaft to them and add a propeller.
Wow hit a nostalgia from a time when this channel only posted video of Motor Stirling! Flees times...
I'm sure somebody may have already said it, but: RC Titanic. Two engines powering the port and starboard 3-blade props and somehow run a generator or scale steam turbine to power the center 4-blade prop.
I'd love to see a double or triple expansion model engine
I feel like something like this would be absolutely amazing on an RC boat
That 3 cylinder sounds sooooooo goooood, way better than that 2C. Awesome engines anyways!
The 3 cylinder one sounds so much like my Yaris. Haha!
Please change its oil and srvice it if it sounds like this, poor thing.
As beautiful as they are you're taking a step backwards with thermal efficiency. That said how awesome would it be seeing one of those in one of your cars... it could be Steam Punk themed
This might be a silly question but could you set the two engines up in series and do a double expansion setup?
you could BUT then you woulld have to use a governor to keep the engines in sync with each other ... parallel and you can run two different sets of things like say a generator for lights and some battery charging ... and then bands for tools and machines like lathes or drills or sanders or saws etc ... literally a miniature machine shop run from 2 steam engines with lights and all fully functional ... ok so they are best suited for smaller parts and more likely softer metals ... but perhaps can be used to actually make the models with scale sized actual machines ...
I love that reversing level!!!
I love steam engines, if they can't take the load, they just ramp up the pressure and power through them
браво мастеру золотые руки 🙂
Great video as always but i noticed something. You were able to produce 1.5 w of electrical power using a generator but you were only able to produce 1 w of mechanical power with the same engine. This doesn't seem right, maybe the dyno gives us fals results.
I thought exactly that
Higher friction losses in the dyno most likely. I think it's designed for much higher power levels.
@@VintageTechFan a dyno is designed to test HIGH SPEED torque ... a steam engine is considered low speed torque ... so the steam engine will start fast and finish at the same speed ... while a proper engine will start slow and finish fast .... a steam engine isnt abut going fast it is about moving heavy loads and doing lots of low end muscle work ... while an engine is about constantly accelerating adding more and more speed to the power curve ... put a car engine on a jet engine dyno and the car engine looks like a peddle car ... same idea as a steam engine on a race dyno ..
That was fascinating I love it!!! Now make 2 banks of 4 cylinders just like on Titanic!!!
That 3 cylinder engine reminds me of titanic
Echt super gemacht 😊
I wonder if its possible to make a small steam turbine to go alongside the main steam engine, connected to a gearing system, to act as turning gear system. So in theory you could have a high pressure burst of steam, maybe lasting 5-10 seconds or so, that would spin up the turbine, turn over the pistons to remove any water, before then being able to start the main engine. If calibrated right, a governor could open the throttle valve to an idle (or maybe a "start up") setting right as the waters cleared from the cylinders, whilst also closing the valve to the starting turbine, making the start up an automatic proceedure automatic. Don't know if this would work in practice but if I had the time and tools I'd love to try and make it work. Not only is it a cool little party piece, it would also sound incredible. The hiss of steam, with the winding up whirl and shriek of the turbine, followed by the main engine sputtering and roaring into life!
Edit: Doing that maths thats about 1.63 hp/L, and about 13.07 Nm/L which isn't half bad for what it is I think!
0:10 that sounds like an actual engine for real 💯
Don't give Jhonny some new good ideas to make this into a RC-Car
WHAT!..... no whistle?
Super cool. Once again you have done a great video!
Never thought I’d hear a steam engine rev like that
nice
I’d love to see you stretch what’s possible with steam power!
Excellent. Would love to see a triple expansion engine from the same maker.
Interesting. The Liberty Ships circa WW2 used triple expansion piston steam engines because steam turbines were in short supply and were mainly used for war ships. Later in the war when steam turbines became more available they were used for the bigger/faster Victory Ships.
It's 2 in the morning and here i am watching smol engines run
I love me
I have a seperate chapter to study about steam boiler this video helped me
the beauty and clarity of idea givers evergreen Britains.
Damn I want that boiler setup just to make cups of tea 🍵
Whats app u use on your phone ???
U make some very nice and high quality stuff!
If you would mount this on a rc car I would die laughing 😂
Is there a way to add water to the boiler while under pressure? Not necessary with butane, but handy if you want a longer run. Nice running, very well timed engines!
Do I smell a Steam Engine RC Car in the works?? :D
Epic! Thanks for sharing!
Oh boy those are awesome. And very speedy I love your channel.