9.9 Suzuki Outboard Modification to 15 HP?
HTML-код
- Опубликовано: 29 авг 2024
- Get your Stainless Prop here www.amazon.com...
My third and final attempt to do the conversion.
Part number 13820-98L10 for the 9.9 restrictor plate.
Part number 4121-093-09A for the propeller.
Boating keywords :
hmy yachts, electric boat company, charter boats for sale, nautique boats for sale, electric boats for sale, yacht management, yacht manufacturers, yacht companies, sailboat manufacturers, yacht builders, Monk boat, monark boats, pontoon boat manufacturers, houseboat manufacturers, hinckley yachts for sale, duffy electric boats, tugboat companies, catamaran manufacturers, inland boat company, top 10 boat brands, national liquidators boats, jet boat manufacturers, power catamaran manufacturers, best boat manufacturers, nottingham boat company, potoon manufacturers, berkshire pontoon, top 10 boat companies, discontinued boat manufacturers, deck boat manufacturers, boat towing service, rybovich boats for sale, geico boat, viking yachts 92, luxury yacht manufacturers, venture boats for sale, global yacht owner, boat company owner, berkshire boats, genmar boats, mastercraft boat prices, high performance boat manufacturers, top sailboat manufacturers, used duffy electric boats for sale by owner, electric boat engines for sale, singleton marine group, berkshire pontoon boats, boat manufacturer, dutch yacht builders, tugboat companies near me, boat manufacturers near me and Americn Fiberglass Boat Company
If you're going to change (Modify) the Restrictor Plate from the 9.9-HP to either the 15 or 20-HP, you NEED to change the ECM Module as well...That's why you were getting the problems you mentioned! Spend the money for the extra part (ECM Module), and you won't have that problem!
Depending on where you buy the motor, and where you would buy the parts, I bet it would be better to just buy the 15 or 20 over the 9.9 since there's only a $100 difference between the 9.9 and 15 and ~ $400 difference between the 9.9 and 20. Weight difference is less than 25lbs too. suzukioutboardteam.com/product-category/9_9-hp-motors/
Thank you ! enjoy and please be safe ...
Change the ecu, flame arrester and silencer seal to 20hp and your good to go. It’ll cost you 400$ plus shipping though...
Yep. Its the best way to do it and still be able to keep the 9.9 cover for restricted lakes.
Any videos on this?
Thanks for the video. I just got a 2022 Suzuki 9.9 and I may do the 20 upgrade. We have a lot of 10 hp restricted lakes and he said 9 out of 10 of the Suzuki 9.9 he sells with the “high performance upgrade” hahaha. He replaces the restrictor plate and ECU. He said the mother does (overall) run better because it was originally designed as a 20.
In my case I didn’t opt for the upgrade but may do it later. It’s going to live it’s life as a kicker and at not much more then half throttle, at most anyway. I’m debating if the $700 upgrade will even be worth the money and effort.
I would be a little cautious with opening up the restrictor plate. The ECU is programmed for that volume of air and the computer is telling the injectors to deliver the metered amount of fuel based on that restricted amount of air. It may lean the motor out more then safe. That’s probably why you where getting surging, that’s a sign of a very lean condition.
Good luck I’m excited to get mine out on the water!
You'd probably be happy with just opening that middle hole on the restrictor plate slightly larger.
It definitely makes a difference. I've done it too large before and it did surge, Bought a new 9.9 plate and went less large in drilling it out and it worked great. Best of luck to you in whatever you decide to do.
Why not buy a 15 hp restrictor plate instead of drilling out a 9.9.
Really need to change tune(ecm) if you change the air flow
My understanding is the ECU gets a headache and goes into limp mode if you exceed the rev limit, which is why its necessary to swap out for a higher rated (15 0r 20 horse ECU). My question is, If you replaced the 9.9 restrictor plate with the 15 horse restrictor plate, wouldn't installing a higher pitch prop say a 10 or 11 pitch, bring down the rpms to a limit the 9.9 ECU could handle?
I've done this opening of the restrictor plate twice. Once on a 2019 short shaft and once on a 2020 long shaft 9.9 and I can tell you the engine does not go into a limp mode. The second time I opened it up a little too much and experienced slight over revving. So I had to buy a new plate. If I recall there was no availability to purchase a 15 plate at the time, so I purchased another 9.9 plate and drilled a little, but not so large. This method definitely opens it up noticeably. Regarding prop pitch and ECU I didn't play around with those. I think it would get expensive trying different props out. If I had to do it all over again I'd just buy the size I wanted and let the factory engineers figure out the math behind the performance. Thanks for the reply and if you do something to your outboard please stop in and share your experience/results.
@@BrianMDIY Thank you for the response. I purchased the 9.9 for two reasons.1. The lake I plan to spend the most time on has a "no wake" restriction. There are plenty of boats with large motors on the lake, but they all have to run in idle. I didn''t see a need for a larger horse power motor. 2. Several other nearby lakes have a 10 horse or under restriction. My boat does alright with the 9.9 on the river. However I'd like a bit more power when I take friends out (added weight). My motor is a new 2021 model. Owners manual sates: Over-revolution Caution System: This system is activated when engine speed exceeds the maximum recommended speed for more than 10 seconds. If this system activates, engine speed will automatically be reduced to approximately 3000 r/min. So my thought was a larger prop would reduce the rpm, hopefully keeping it in a safe range. However, I don't know much about outboard motors and don't know if fule mixture or other things may be effected. Your modification may be enough to give the boost I'm looking for.
Order the restrictor plate for the 20 hp and install seen it on other video
My opinion is that opens up too much air flow without changing the ECU. This is risky enough as it is. Run it too lean and it will over rev and possibly damage the engine.
Did this work and any gain?
Yes. Slight power gain for sure.
How's this been running for you? Just got a 9.9. don't want to pay for the ECU ethier. Just need a couple more horses.
Works fine. Just don't go too large with the hole. You'll be fine and enjoy the extra power. Best of luck.
@@BrianMDIY does this work for older models or just for the newer ones
@@joshuapriestley9269 Just the Fuel Injected engines.
@@BrianMDIY thanks for the info brother
@@BrianMDIY Did you make the hole as large as the stock 15hp restrictor plate? I plan to purch one and try swapping as cannot find a 9.9 plate available to drill out.Thanks
this will apply to other brands of outboards i assume ?
Probably.
Whats the difference between df9.9a and df9.9b? ..all info seems to be for B and ofc i got an A. ;)
I don't exactly know, but some models have electric starters.
@@BrianMDIY No electric start.. just a plain "pull and go". Didnt find any info with Dr Google too.
@@johangrannas4837 possible EFI or other options also. Enjoy your new engine!
@@BrianMDIY Comparing "DF8A/9.9A SUZUKI MAINTENANCE KIT 17400-99840" and "DF9.9B/15A/20A SUZUKI MAINTENANCE KIT 17400-89811" id say that the a-model is less and the b-model is a shrinked 20hp. Both kits look almost the same but the b-model have a larger fuel filter.
did some further searching and found this video ruclips.net/video/Bk1MWBBfgp0/видео.html
...so now in just confused. But in a positive way! ;D
seems like A or B doesnt matter, or both are at least changeable.
Can you also do this by a 2008 4 stroke suzuki
I don't know. If it's EFI probably you can.
This is similar to adding a cold air intake and cat back exhaust to a car in order to increase horsepower. Makes sense.
Why didn't you just buy the ECU and proper restrictor plate for a 15 or 20hp?
In a word...cheap.
How may millimeters in diameter is the at 15 Le ?
Bad thing, you need to replace ecu and cam
It worked perfectly fine for what it was. Yes, you can take it further. That's up to the owner of the engine and what they're looking to accomplish.
@@BrianMDIY My motor still under warrantee I’ll have to wait a couple more years. I don’t need to void the warranties. Is there a different carb restricter for the 9.9 and the 15 hp? The 20 hp. Has a low restrictive mesh.
@@mikeepps8705 This is a EFI engine. All 3 models have a different sized restriction. If you're concerned about warranty, I would not make this mod.
@@BrianMDIY thanks dude for your info Mike
Yamaha is same ?
I don't know. If it is, you'll probably find similar info with a Google search. Best of luck.
Thank you for this video. I've got a 10' RHIB that's rated to max 15hp. Have a 9.9 4 stroke carb'd Merc that runs well. I'm aiming to get a 20hp next year as they are the same weight/size as the 15hp motors and I want to tow a tube on the lake with a couple small kids or another adult in the boat. Would be getting somewhat close to the maximum occupancy weight, but never over. I'm concerned that it's going to be too much power for when I'm not loaded up? Could I just swap a different prop for the lighter trips? I'm mostly concerned about having the power when I need it - I don't tend to go fast as a rule.
I'm pretty sure props are not where you would get your speed. Probably you'll need to change the carburetor. There is a torque difference when you change from three blade to four blade prop. Maybe look into those topics? Best of luck to you.
Hi I'm from Uruguay. You more or less don't know how much they cost used each. It's for fresh water
I don't know. You'll have to Google search for that information or ask a professional.
Hello good afternoon I would like to know if. How much a 40hp and 30hp long leg suziki costs. Used 4times. 2018
Sounds like it should be worth about. 75% of what it costs new. I wouldn't pay any more than that. Even less if you can negotiate a better price. Also would depend if it was used in salt or fresh water.
You forgot to switch the ecm out its ran by a computer you have to do ill at once or it won't be right
Resrictör change turkey sınırlayıcı kapasitör
If you put a 20 will the motor have problems?
I haven't tried it.
Or if I can't get past some responsible home that you know ai sell outboard engines
Used
You don't have a phone with wassap to communicate better you if you don't have a gracis problem