⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I'm giving up on my 2008 chest Malibu with a 2.4 engine. You have solved every issue I have had on the piece of junk AC control lights want come on. I have done and replaced everything except for the car I bought another car and still have this piece of junk
Could you possibly tell me the best computer to purchase I have the snap on verdict d7 it's not been the best for me by no means I do mechanic work for a living as well
Im with Jose Z. - i have a 2012 Buick Lacrosse w/P0191 P0172 OBD2 codes, No vacuum leaks, I've cleaned out the MAF,MAP and replaced the air filter. i do not have the service manual
I had the same issue. It was the high pressure fuel pump. I had to get it replaced. You should check if your oil has any gas in it. If it does it’s definitely the pump.
Thanks for the video. I have a 2007 Sub with only 74 miles. Check engine light turned on with OBD code P0446 (Evaporative Emission System Vent Control Circuit 1/1. I've replaced the gas cap, vapor vent canister valve, vapor jumper wire and the Emissions Vapor Canister Purge Valve Solenoid EVAP Vent ( I don't think it's necessary but I did it anyway). Cleared it and the check engine light is gone but after driving 93 miles, the I/M is still not ready with a combo drive of city and fwy. Drove it for another mile and after 6 cycles, when I ran the OBD at 94 miles to see if it's I/M ready, unfortunately I see the same "pending" P0446 code despite driving it up to 110 miles hoping it will clear on it's own. So I decided to erase the pending code/OBD and did the same thing again. Drove it up to 92 miles without check engine, still not I/M ready and at 94 miles later it's still not ready and the "pending" p0446 code is back. Replaced the vapor vent canister valve, vapor jumper wire again just in case I have a bad part, but unfortunately pending P0446 code is back. I'm hesitating on replacing the vapor vent/big box like cause I don't have issue filling up gas and no gas odor around the area too. Could it be the fuel tank pressure solenoid? I hope not... cause I know this is pretty common on the 2006 but not on the 2007. I'd appreciate yours or anyone's.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I'm giving up on my 2008 chest Malibu with a 2.4 engine.
You have solved every issue I have had on the piece of junk
AC control lights want come on.
I have done and replaced everything except for the car
I bought another car and still have this piece of junk
One best videos on RUclips, thanks
Could you possibly tell me the best computer to purchase I have the snap on verdict d7 it's not been the best for me by no means I do mechanic work for a living as well
You are awesome and very helpful my bro!!!
Im with Jose Z. - i have a 2012 Buick Lacrosse w/P0191 P0172 OBD2 codes, No vacuum leaks, I've cleaned out the MAF,MAP and replaced the air filter. i do not have the service manual
I had the same issue. It was the high pressure fuel pump. I had to get it replaced. You should check if your oil has any gas in it. If it does it’s definitely the pump.
Thanks for the video. I have a 2007 Sub with only 74 miles. Check engine light turned on with OBD code P0446 (Evaporative Emission System Vent Control Circuit 1/1. I've replaced the gas cap, vapor vent canister valve, vapor jumper wire and the Emissions Vapor Canister Purge Valve Solenoid EVAP Vent ( I don't think it's necessary but I did it anyway). Cleared it and the check engine light is gone but after driving 93 miles, the I/M is still not ready with a combo drive of city and fwy. Drove it for another mile and after 6 cycles, when I ran the OBD at 94 miles to see if it's I/M ready, unfortunately I see the same "pending" P0446 code despite driving it up to 110 miles hoping it will clear on it's own. So I decided to erase the pending code/OBD and did the same thing again. Drove it up to 92 miles without check engine, still not I/M ready and at 94 miles later it's still not ready and the "pending" p0446 code is back. Replaced the vapor vent canister valve, vapor jumper wire again just in case I have a bad part, but unfortunately pending P0446 code is back. I'm hesitating on replacing the vapor vent/big box like cause I don't have issue filling up gas and no gas odor around the area too. Could it be the fuel tank pressure solenoid? I hope not... cause I know this is pretty common on the 2006 but not on the 2007. I'd appreciate yours or anyone's.
You might have a small leak on the system. You need a smoke machine for that.
@@davidblaze1652 Thanks
Can you please make a video showing how to replace this sensor ?
I have a 14 Malibu how do I go by draining gas from tank
So, the cheaper scanner showed the same thing; only thing missing was desired fuel pressure.
From what I got out of this video is save some money and time by using the simple device
Video not playing just hwew u talking
Here we go again and what did you show?? nothing !Clickbait only that.
Hey guys, why do some Eastern Europeans say guys so much guys?
Crazy video whatever you explained non sense time wasted 🤒😩😠😠
wtf you saying we can understand
seen a couple of his videos all the same trash talking
nothing useful at all waste of valuable time