Comes a time when the Ruckus will be maxed out & the repercussions of that is your credit cards being maxed as well $$$ LOL. Just a little humor, 😀 surprising how much money you could put in one of those little machines . I was going to tell ! Got to ride my first Vespa 300, wow runned awesome 🌟 hope you had a Happy Thanksgiving 🦃 🙌🍾🥂 Salute.
Hi, I'm Thomas. I need help with my 2023 Ruckus. I tried to use a shop they misled me I wasted $700 on stage two kit and my records go slower than it did before I put the kid on. I live in Ruskin Florida I would love for you to work on my machine where are you located.
@@RollingWrench i agree not sure if you remeber traded some video and messages a few months back to diagnosis a gy6 that had a destroyed starter clutch and it was super sketch at the top speed of 86 mph... after replacing my trx 450 with a amazon special carb set up. Not sure if you go my other message but my 6 finished builds and stock pile of parts was recently stolen amd the trailer was found actually in your neck of the woods i think. If your in Denver, i think i remeber thinking you were in Colorado. Im going threw scooter withdrawal.
@ROLLING WRENCH , would the EVI get a ruckus with a ecm that's died for the 2ed time back up and running wasn't sure how it was wired of it pulls power from 12v and then just pulse from pickup with timing built In the last time this happened I replaced the stator checked all the wiring and put another ecm on it only for ot to blow the ignition controller internally after 500 miles, would the EVI get ot going again without a need to buy another brain still runs the fuelpump and and cranks over
TRY A STANDARD E.F.I. AND [UT IT ON THE TURBO, BALANCE THE PORTS TO TIMING, THEN PUT ENGINE ON A FLOW METER SETS USING THIS TO MEASURE AIR FLOW INTO THE ENGINE AND WHAT'S COMING OUT. BEST WAY TO BALANCE AN ENGINE WHILE RUNNING. IT BALANCES THE PSI, AND FUEL MICING WHILE RUNNING EVEN SET THE WASTEGATE PRESSURE AND SEE ID IT WORKS WITHOUT DAMAGING THE ENGINE. The head will have to be a four-valve setup, have titanium valves in it. if you don't use EFI for whatever reason, try a 38 mm racing carb on it! Then you will have max power that the engine can make, for sure!! Done right without damaging the engine you can get 45% more power out of it. On this video why not balance the crank while you have it out and then power balance the thing, be sooo smooth running if done? oh yeah, did I tell ya, over 100 mph? peace out!
I’d like to do that to mine. How is the EFI kit coming along? I want to keep it a stock 49cc because laws loop holes where I live but I’d like to be able to rid on a road that’s 55mph and not come close to dying. My stock ‘09 can hit 42mph down hill/flat but when I hit the uphills I drop speed so fast it’s like breaking to 15-20mph. Think y’all make a 49cc EFI performance kit with titanium values and so on. Like a stage 1000000 for the GET 49cc
Hey brother you ever build a motorized bicycle? I've taken to building them this winter way cheaper and still fun. Would love to see what you would do with a frame up build.
Great video.... I've hot a 50cc Tao Tao and its a little rough but its my first-ever scooter and i wanna put a 150 in it on a very tight budget. Any advice?????
The 150 motor mounts from the top and the 50cc mounts from the bottom. It would be a difficult swap. This is what I recommend for max power out of the engine: www.rollingwrenchdenver.com/products/90cc-monster-big-bore-cylinder-kit
Let me help you a little. We are in Denver Colorado. We are at nearly 6000 feet above sea level. The higher you go in elevation the worse your performance gets. We loose 20% of power up here. Of this same bike was at sea level in Florida it would easily do 60mph. Put that in your brain and store it.
![Honda Ruckus / Zoomer Engine build: MAX PERFORMANCE [Parts 2]](http://i.ytimg.com/vi/HgSIZ2RkjoI/mqdefault.jpg)
![Honda Ruckus / Zoomer Engine build: MAX PERFORMANCE [Parts 2]](/img/tr.png)
Awesome work dude,enjoy looking @ your vids.
Thanks man! I appreciate the positive vibes !
That honda had to show u why they rev so high 🏆🏆💪💪
I really enjoy watching your videos I learned quite a bit on this video can't wait to see your next one please
Comes a time when the Ruckus will be maxed out & the repercussions of that is your credit cards being maxed as well $$$ LOL. Just a little humor, 😀 surprising how much money you could put in one of those little machines . I was going to tell ! Got to ride my first Vespa 300, wow runned awesome 🌟 hope you had a Happy Thanksgiving 🦃 🙌🍾🥂 Salute.
Yes, these hobbies can be expensive no doubt. The Vespa 300 is the 💩!
I've heard the European ruckus has a 4 valve head... Wonder if one of them would work on our rucki over here.
does usa have fuel injection ruckus too?
Markus Oja no
We need the fuel injection and 4 valve head..
@@okwhatever4083 fi isn't as good as you think
Como poner a tiempo una honda ruckus de 50cc, por pastilla y enfriamiento por agua
Hi, I'm Thomas. I need help with my 2023 Ruckus. I tried to use a shop they misled me I wasted $700 on stage two kit and my records go slower than it did before I put the kid on. I live in Ruskin Florida I would love for you to work on my machine where are you located.
Good vid can’t wait for the rest
Thanks for the support 🙏. If the snow would stop I could get the rest of the video out 💯
Whats is the fastest ruckus you have built , have you gotten to 100mph with the gear set you put together on the 232cc? .
I have gotten my 232 to 96 and it had a bit more.... super sketchy
@@RollingWrench i agree not sure if you remeber traded some video and messages a few months back to diagnosis a gy6 that had a destroyed starter clutch and it was super sketch at the top speed of 86 mph... after replacing my trx 450 with a amazon special carb set up. Not sure if you go my other message but my 6 finished builds and stock pile of parts was recently stolen amd the trailer was found actually in your neck of the woods i think. If your in Denver, i think i remeber thinking you were in Colorado. Im going threw scooter withdrawal.
Any idea when the upgraded think it’s a 25mm carburetor will be back in stock? Thanks
@ROLLING WRENCH , would the EVI get a ruckus with a ecm that's died for the 2ed time back up and running wasn't sure how it was wired of it pulls power from 12v and then just pulse from pickup with timing built In the last time this happened I replaced the stator checked all the wiring and put another ecm on it only for ot to blow the ignition controller internally after 500 miles, would the EVI get ot going again without a need to buy another brain still runs the fuelpump and and cranks over
It should. The EVI bypasses the stock ignition completely. The only time I have seen ecu’ sho bad multiple times is from the NCY cdi box
I always watching your vids it’s fun, that’s why I buy Honda zoomer Japan surplus l like it it’s cool your nice thnks
Them valves are really nice 👍👍👍
4:00, it's like 1/4 of 1/4, of a Honda Civic!
TRY A STANDARD E.F.I. AND [UT IT ON THE TURBO, BALANCE THE PORTS TO TIMING, THEN PUT ENGINE ON A FLOW METER SETS USING THIS TO MEASURE AIR FLOW INTO THE ENGINE AND WHAT'S COMING OUT. BEST WAY TO BALANCE AN ENGINE WHILE RUNNING. IT BALANCES THE PSI, AND FUEL MICING WHILE RUNNING EVEN SET THE WASTEGATE PRESSURE AND SEE ID IT WORKS WITHOUT DAMAGING THE ENGINE. The head will have to be a four-valve setup, have titanium valves in it. if you don't use EFI for whatever reason, try a 38 mm racing carb on it! Then you will have max power that the engine can make, for sure!! Done right without damaging the engine you can get 45% more power out of it. On this video why not balance the crank while you have it out and then power balance the thing, be sooo smooth running if done? oh yeah, did I tell ya, over 100 mph? peace out!
What the fuck are you saying dude, its English but nothing makes sense
Is this a good engine JL157QMJ I'm getting a Roketa mc 22y and that's the engine it has any advice this is my first scooter
Ya gy6 👌
I’d like to do that to mine. How is the EFI kit coming along? I want to keep it a stock 49cc because laws loop holes where I live but I’d like to be able to rid on a road that’s 55mph and not come close to dying. My stock ‘09 can hit 42mph down hill/flat but when I hit the uphills I drop speed so fast it’s like breaking to 15-20mph. Think y’all make a 49cc EFI performance kit with titanium values and so on. Like a stage 1000000 for the GET 49cc
What the ruck just happened!
Do you do service/ build motors for a business?
No, just sell parts
How was the cylinder bored, is there a sleeve or was it recoated?
The cylinder was bored at a machine shop. No recoating
Hey brother you ever build a motorized bicycle? I've taken to building them this winter way cheaper and still fun. Would love to see what you would do with a frame up build.
Can you build a trike
If anyone makes a stroker kit, now is the time!!
Better acceleration but ruckus apparently has a better top speed
I would really like a billet aluminum flywheel.. we can dream right 💯👍😎
Do you ever run oil catch cans
Yes, on my 232 ruckus
great job! how much is for that engine setup? thx!
Is there a vtec cam
Supercharger???
How can I get the 58cc kit?
Great info!
Keep going
try big carb and port youre intake and wxhaust
I have a 34mm efi intake. The head has already been port matched! Thanks for looking out 👍🏻✌️
Let's do my get motor to 58cc olz
Let’s do it!
@@RollingWrench I'll shoot you a email
latnig flaiweel you wil loos koppel or up hil power los
Great video.... I've hot a 50cc Tao Tao and its a little rough but its my first-ever scooter and i wanna put a 150 in it on a very tight budget. Any advice?????
I have same scooter and I put 100cc bigbore kit and got top speed of 46mph
The 150 motor mounts from the top and the 50cc mounts from the bottom. It would be a difficult swap. This is what I recommend for max power out of the engine:
www.rollingwrenchdenver.com/products/90cc-monster-big-bore-cylinder-kit
Anybody in the philly area that can work on a ruckus?
Odd he did all that to get 51 mph when the duck shop sells a stage 2 kit that goes anywhere from 50-60mph and isn’t as intrusive 😂
Let me help you a little. We are in Denver Colorado. We are at nearly 6000 feet above sea level. The higher you go in elevation the worse your performance gets. We loose 20% of power up here. Of this same bike was at sea level in Florida it would easily do 60mph. Put that in your brain and store it.
@@RollingWrench hey thanks for the professional reply! Appreciate it!
That engine said vtec on the valve cover, Honda uses that on there car engines, dose this engine have variable cam actuation?
No, it’s just a classic valve cover lol
@@RollingWrench was honestly hoping someone put vvt into the GET, been looking at all my options for a "project" and the future looks like a Ruckus
@@RollingWrench where do you buy this valve cover?
Yes
Im doing a 63mm build you the guy to see keep up the good videos🙏🚀🔥
do a pcx swap
Heck yaaa!
For better top speeds use heavy roller weights and light contra spring
I have a 50cc and put a 80 cc it Ride the same
Sounds like you have other issues??
Wow
Its not so much expensive to bore up man searce philipines and thailand vlogger
Lmao
Lol
Try to buy 125cc scooter turn it to 180cc
I have a 125 turned into a 232 😛
This is unfair race,,, he is way heavier...
True, but it proves a 58cc GET will take a 85cc EFI met
@@RollingWrench How much the 232cc complete kit for ruckus?
Turbo it lol