Recently just started working on my own cars I got the confidence from watching a lot of your videos( 350z and 335i TT Bmw). I always use to be scared to mess something up but you’ve changed my perspective a lot. Thanks man keep up the good content. I’m currently going a valve cover change on my 335i it’s a more work than it would be on a jdm car. Just wanted to say thanks you’re an inspiration brudda✊🏾
I have to agree with you on that one. I have a lowered 2008 impreza(naturally asperated). its nothing special at all but im really into his detailing videos. He's given me the confidence to buff and ceramic coat my car. I've had my car for about a year and a half and haven't had to take it to a shop yet. (This is my first car)
100% man it’s very difficult to get comfortable working on your own car especially if your a perfectionist or it’s your first time. I just got my own car and started working on it by myself. There’s so many stuff I want to do to it but I’m just so scared I’ll mess something up. I’m clumsy so I overthink whenever I’m done, I’ll wonder if I tighten the bolt enough or will it fall of when I’m driving. But slowly it’s getting better. Time and practice is your best friends
Hey Devin! That mesh is called “expanded metal lath”. This one looks like it’s coated with something black but it’s normally used for stucco application. You should be able to find it in most hardware stores. Love your content, my dude. Keep it up 👌
Devin, I’ve been using “black honeycomb mesh abs plastic” which I definitely believe is similar to what you ordered, and recommend if you’re planning to do DIY. Hope that helps! That’s what I used to facelift my Peugeot 308 S.
I agree with Devon the light tint is to dark on the back lights & I think I prefer the original grill even though the one that’s on now isn’t to bad.... keep up the great content, love the channel 👏🏻
I think tint is a little to dark, also looking at oem spoiler on sti thought it would look good with just the centre mounts and disconnect it from the oem trunk mount. I know it wouldn’t hold it but would like to see it. Keep up the awesome content
Devin there is an Exact same mesh grille (I know because I bought one and made grilles for my subie) that came on MG ZT and ZR's 😁😁 the lower grille Doubt it will help but it's an easy cheap source if you can find any
Look up metal mesh lath for your grills that's the closest I can find that looks similar to what you put on the sti... Hope this helps p.s you might have to paint or powder coat it tho
check with a metal seller in the area Devin where the welding shops gets their stuff from they normally carry several different styles of mesh stock. Bobby will be climbing Devin tonight after all that carbon fiber..lol
Just fyi be careful of galvanic corrosion. Most metals when in contact with carbon will cause advanced rusting in the metal. It is due to the difference in electronegativity between the components so try to isolate any metal (other than inert metal like titanium) from the carbon when putting the wing back together. I assume that's why you saw so much adhesive and sealant when taking it apart. Best of luck man!
Sup man, tractor supply sells mesh that looks just like that for animals except it’s silver/hasn’t been painted. Not sure if the west coast has tractor supply.
Quick question , Did you use the bolts that you taken off the oem grill to the carbon fiber grill or did u have to use selftapping ones? I recently bought mine and will install it tomorrow Thank you
Hey Dev, did the old STI grill have the front camera installed? I saw the wire harness and I have been looking to put it on my 2020 STI. If you are looking to get rid of it, I would be willing to send you few bucks for it. Let me know, thanks.
Taillight tint too dark. I'd get rid of it. Also, what about some new wheels for Bobbie's series grey? The ones on there are ok. But, I'd like to see something new.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Man she looks good from the back. Car looks pretty good too..
Recently just started working on my own cars I got the confidence from watching a lot of your videos( 350z and 335i TT Bmw). I always use to be scared to mess something up but you’ve changed my perspective a lot. Thanks man keep up the good content. I’m currently going a valve cover change on my 335i it’s a more work than it would be on a jdm car. Just wanted to say thanks you’re an inspiration brudda✊🏾
I have to agree with you on that one. I have a lowered 2008 impreza(naturally asperated). its nothing special at all but im really into his detailing videos. He's given me the confidence to buff and ceramic coat my car. I've had my car for about a year and a half and haven't had to take it to a shop yet. (This is my first car)
100% man it’s very difficult to get comfortable working on your own car especially if your a perfectionist or it’s your first time. I just got my own car and started working on it by myself. There’s so many stuff I want to do to it but I’m just so scared I’ll mess something up. I’m clumsy so I overthink whenever I’m done, I’ll wonder if I tighten the bolt enough or will it fall of when I’m driving. But slowly it’s getting better. Time and practice is your best friends
Hey Devin! That mesh is called “expanded metal lath”. This one looks like it’s coated with something black but it’s normally used for stucco application. You should be able to find it in most hardware stores. Love your content, my dude. Keep it up 👌
The mesh for the grille is called expanded metal. you can get it from any metal supplier. You can even find a version of it at Home Depot and Lowes.
Dan Gurney was the first to use the added aero edge on his All American Racers
Glad to see Evo 8 wing being salvaged.
More Bobbi booty slap 🙏
lol yeah that was some jiggle with that slap!
Something that’s simple and will make the back look so good is the third brake light
love the red sti badge. And add some led reverse lights now you’ve tinted them. Until the rear lights get replaced
yoo love the constant uploads and updates on the evo i just realized i wasn't subbed lmao
7:50 Damn that slap to da ass doe lmao....
Ι was gonna comment that, too good....
Devin, I’ve been using “black honeycomb mesh abs plastic” which I definitely believe is similar to what you ordered, and recommend if you’re planning to do DIY.
Hope that helps!
That’s what I used to facelift my Peugeot 308 S.
Looks so much better without the lettering. Love the grill!
The no wing EVO is growing on me.
I agree with Devon the light tint is to dark on the back lights & I think I prefer the original grill even though the one that’s on now isn’t to bad.... keep up the great content, love the channel 👏🏻
You can find a 4’x8’ sheet of that mesh at Home Depot or Lowe’s. I believe it’s in the masonry section
Way to save the evo wing dude ! Bobbi's STI looking sooo good with the carbon fibre damn
seeing the sti grill and mesh look so clean just encouraged me to get off my ass and finish my custom grill for my car
You should color match the trunk tip I feel like it would look cleaner if it matched
That extra piece that goes onto the top of the wing looks very RICER🙄. The grill though looks SICK😎👌🏻. The taillight tint looks ok🤔.
Shout out from Australia 🇦🇺 I’m more of an American muscle car fan but loving the work you do to these cars mate
Hopefully your able to save the evo 8 wing. It should be possible if you were able to save the black sti paint.
Are you planning to try to re-mount the front camera? I was looking at the same grille but don't want to lose the front camera.
Awesome STI change. It just need 2 red horns instead of that small stock 1 :D That will finish that new grill look so much!
I think tint is a little to dark, also looking at oem spoiler on sti thought it would look good with just the centre mounts and disconnect it from the oem trunk mount. I know it wouldn’t hold it but would like to see it. Keep up the awesome content
Go to Lowe's in the lumber department they have sheets of mesh it bare aluminum but you can paint it.
Devin there is an Exact same mesh grille (I know because I bought one and made grilles for my subie) that came on MG ZT and ZR's 😁😁 the lower grille
Doubt it will help but it's an easy cheap source if you can find any
Subí looks dope! Change out the Reverse lights to leds! It will give it a better look.
Liking the tail lights. Gary needs the STI on the front. Poor Uncle Bob Biden diggin' the boys lol.
CustomCarGrills.com may have the type of mesh you are looking for. They have a lot of styles of mesh on there.
THAT TAILIGHT TINT LOOKS SO GOOD!
Go with the lit logos sti badge if it’ll work out with that grill
About the taillights tint I don’t like to tint the clear part I like the red part to be tinted
Tail light tint is cool, I'd keep it
Rub the end caps down it’s full carbon I did mine on my black Evo 8 and looks so sweet 👍
So Mitsubishi did make the whole wing out of carbon?
They sure did both my Evo 8 have them rubbed back to carbon
Some red Hella Horns behind that mesh would look dope.
Look up metal mesh lath for your grills that's the closest I can find that looks similar to what you put on the sti... Hope this helps p.s you might have to paint or powder coat it tho
Also the sti need some carbon fibre front bumper fins then it's flow's good 👌
I think the other grill was for a 15-17 Sti
You could use a truck STI Badge for the front grill possibly....
Looks fantastic. Have you considered black front & rear STi badges?
Hi I'm come from taiwan and I find out why this video is recommended to me , love your evo and sti.
check with a metal seller in the area Devin where the welding shops gets their stuff from they normally carry several different styles of mesh stock. Bobby will be climbing Devin tonight after all that carbon fiber..lol
The mesh is tile lath from Home Depot/Lowe’s in tile section
Just fyi be careful of galvanic corrosion. Most metals when in contact with carbon will cause advanced rusting in the metal. It is due to the difference in electronegativity between the components so try to isolate any metal (other than inert metal like titanium) from the carbon when putting the wing back together. I assume that's why you saw so much adhesive and sealant when taking it apart. Best of luck man!
Yesss Bobby 😍 I agree with the wing 😍 I love how Bobby hits she getting new taillights 👀
Hardest working youtuber out there for sure, always with the 🔥 videos!
Time to put lasfit bulbs on all those lights. License plate, turn signals, back up lights all that good stuff
Can you swap the carbon 9 wing onto the 8 up rights? That way you have good carbon and the 8 appearance?
Car looks complete at the back now, Bobbie got taste!
yo paint the Subaru badge from the trunk red and put it on the grill. Would look sick and unique!
If bobbi wants to keep the sti badge, then I think the calipers need to be power coated the cherry blossom color. Or as close as you can get.
Sup man, tractor supply sells mesh that looks just like that for animals except it’s silver/hasn’t been painted. Not sure if the west coast has tractor supply.
Andy’s Autosport had some decent mesh 🤙🏼🤙🏼
Home depot for the mesh. Great video sir
Devin you have to up grade to led light bulbs k the reverse an license plate
Should tint the lower bumper light too
I’ve been needing to do this on my evo but it was intimidating. Thanks for this video now I’m gonna do it😂
Carbon fiber hood on the STI next.
Next mod should be the carbon fiber hood scoop (there is an oversize one for that chasis)
The slap 🔥🔥👍 Sti looks sooo good from the back 💪😍
It looks so clean 🔥
Yo where did you get the carbon overlay for the bottom piece on the bumper. I need that
7:50 damn that was crisp
Quick question , Did you use the bolts that you taken off the oem grill to the carbon fiber grill or did u have to use selftapping ones? I recently bought mine and will install it tomorrow Thank you
Check Home Depot for rain gutter guard for that mesh
aluminumwiremesh.com/aluminum-mesh/aluminum-leaf-mesh.html is what it looks like to me bro
Grill is a game changer
Clear already peeling? Have you thought about taking a body/paint course? Would save you time and money in the long run...
Are you putting an emblem to the STI using the after market grille?
Awesome video Devin loving the humor.
Damn she need to be built now (the STI that is)😉 also to finish the grille you could get some hella horns to fill it in
Bobbi’s STI looks so 🔥🔥🔥
The tint looks lit
wait how did he take the bumper off? I missed it
i bought mesh like that on ebay about a year ago
Devin is giving off dad vibes this video
The red STI badge will set that car on another level 📈📈📈
Carbon hood scoop on the sti coming soon..?
You need to put on tinted plate covers change the look it cheap and makes the car look good
Impossible is nothing, especially with cars. And for this one time, it even was something positive! 😅👍
tint is ok but use some led lights cuz the visibility is bad now
Scoop up buddy club tails 🙌🏼👀
Wish I had a video of them on my channel, but I’m selling my STI 😓
The OEM Grill with the red badges look better. Usually I agree with you, but OEM is better this time.
I think the aftermarket one will look good with those red badges
Would you sell the black Subaru and AWD letters?
Just buy em on eBay for cheap.
7:45 - 4 THE BOYZ😎
Hey Dev, did the old STI grill have the front camera installed? I saw the wire harness and I have been looking to put it on my 2020 STI. If you are looking to get rid of it, I would be willing to send you few bucks for it. Let me know, thanks.
I’m in love with that sti 😭
For mesh you could totally mod out chicken wire. That would be hot
Scooby looks good from behind... BUT BOBBI from behind is amazing ! :D
The gurney flap was named after Dan Gurney who invented it
Before I saw I’d the grille fit I clicked on the link to see if it’s another pic of garbage 😂, I knew it would work when you actually linked it
Wish sells those mesh.. i bought one and its very cheap too..
11:15 Kinda like a chicken coop type of mesh
19:40 Full send black out ahah
Smoked out olm evo tail lights would be 🔥🔥
Hey Devin! What are the specs on the wheels on the sti?
Looks good
All red tails looks so good thooughhh
So when you putting a SEIBON hood on the STI, we all know it needs it!
11:35 made this video my favorite ever😂
bobby sti is 🔥
Looks really good!!! Looks 3D
Taillight tint too dark. I'd get rid of it. Also, what about some new wheels for Bobbie's series grey? The ones on there are ok. But, I'd like to see something new.