Walking The Cup | TIG Welding For Beginners !

TIG Welding for Beginners, Walking The Cup Technique! Easy Steps! These beginner-friendly steps are about Walking The Cup, TIG welding technique on steel plate, and carbon pipe in position! This video is about how to start and gain the required skills before moving on to the pipe while walking the cup or wiggling with the tig torch. The video gives the viewer good insights into how to place good and solid tig weld passes. With the appropriate training and practice on the operator's part, learning to walk the cup can become an invaluable skill!
'Walking The Cup" technique offers consistent quality welds while creating minimum operator fatigue.
#walkingthecup #tig #tigwelding
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
My videos are recorded at working sites in various locations and welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my RUclips channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
/ x3mtig
🌐 Stay Connected & Learn More:
📧 Email: [e-mail]
📘 Facebook: / x3mtig
📸 Instagram: / x3mtig
☕️ Buy me a coffee rb.gy/34q2c

[@andrewgamelin2780]

The arm motion is what i was looking for as well ty

[@cybertree]

Thanks you sir, you are the man! That was the key piece I was missing that it *comes from the ARM!* I've been cursing at my wrist for a couple of weeks now!

[@X3MTIG]

Excellent!👍

[@khalidabouhassan5836]

Really helpful for beginners!! Awesome one bro!✊🏾

[@X3MTIG]

Thanks brother 👍

[@isaacquintanilla1726]

@@X3MTIG excellent video. Amazing skills. Do you prefer the 70s6 over 70s2. If so why?

[@X3MTIG]

@@isaacquintanilla1726 Thanks bro. I prefer ER70S-6 , got high level of silicon, and gives you more control over weld puddle, easier to manipulate.

[@mohammadabuhamed3513]

Excellent tips and unreal looking cap!!! Amazing🙌🏽👍🏾

[@X3MTIG]

Thanks brother 👍

[@arshadmasih0410]

Best teaching sir and God bless you ❤

[@tonisiqueira9543]

Sim mestre observei sempre suas instruções e tenho feito na prática e observado que uma bela soldagem visual tem como sua principal características sempre uma uniforme alinhagem formando um lindo acabamento entorno a sua junta sou do Brasil e agradeço seus ensinamentos obrigado sempre 🙏

[@X3MTIG]

Thanks bud 👍

[@stipe573]

Fenomenalno. Odlican video!!

[@morgostas]

Thanka for sharing experiance and skills 🙏

[@X3MTIG]

Thanks for watching!

[@TulanePass]

Another great video.

[@Then.72]

Only problem with people who can’t weld freehand neatly is they are stuck when you have a field weld that is close to a wall & can’t be walked but I do agree that it’s great for speed & comfort as you can stand & roll the pipe or vessel etc

[@jeepwk6.5L]

Most field welders can do both

[@Then.72]

@@jeepwk6.5L I know many that can only walk the torch but their freehand is no match

[@jeepwk6.5L]

@@Then.72 👍

[@IRT.D.R]

Do not be tired bro nice👍🔥

[@tamasbalogh5305]

Nice job 🙂👍

[@bobwferguson]

I like the explanations

[@micmike]

Good advice, thanks

[@JOSEPHGODIYA]

Good jobs more grace

[@tonisiqueira9543]

Sim mestre observei que tenho de manter sempre uma linhagem de direção para que meu trabalho tenha um ótimo visual no término da soldagem obrigado pela orientação 🙏

[@X3MTIG]

Yes my friend, very important to have good control for nice looking cap! 👍

[@gilbertjoseph7760]

good traine❤

[@carlosmarcossantos5892]

Gostei muito desse vídeo estou começando na tig e mim ajuda muito

[@X3MTIG]

Happy to hear that 👍

[@IrimerJimenezRivero]

Hermoso el cordón

[@brunomasella4956]

could you make a video on how to hold the wand and how to feed the puddle when we do walking in the cup in the final pass? i have the problem that i get a bead that is always flat and not convex

[@X3MTIG]

Sure buddy, when I get chance I’ll do it.

[@mamunurrashid724]

good job sar

[@nickmalveaux6131]

Should I turn my heat up or down when it's time to run my cap pass?

[@spacewalker_98]

Can you please recommend the current i should set for practicing on a SS plate?

[@X3MTIG]

Depends on the thickness of the plate!?

[@brunomasella4956]

nice! i wanna work with u master!

[@X3MTIG]

Maybe one day!

[@heathwatkins2509]

What temp would you run on 1/8 stainless rod for fill and cap?

[@X3MTIG]

Depends on the pipe thickness, but somewhere between 120-140 amps

[@heathwatkins2509]

@@X3MTIG appreciate the reply brother.

[@Shirtlessbearfighter]

90

[@J-tp5ji]

Hi X3M TIG do you use a rigid or flex head torch for walking the cup?

[@X3MTIG]

I use both, but prefer flex head.

[@J-tp5ji]

@@X3MTIG Thanks👍

[@phatmans.adventures777]

👍 😎

[@wathqf.6612]

If the argon gas is dirty, what are the defects and problems that appear?

[@X3MTIG]

Chances for having a dirty Argon are very slim, but it can happen. The first thing that you would notice is porosity, especially if you use it for purging.

[@brianbeaubien7371]

❤

[@king82382]

Any trick to avoid slip during walking the cup on the bead?

[@X3MTIG]

It’s not a trick it’s more of a tip I can give you. Don’t hold your torch to tight, relaxed hand and hold on to the lover part of a torch handle.

[@sergcyxa]

Also I found when you run too hot or your ceramic nozzle made a lot of kms of weld

[@nathanielgonzalez151]

What amps do you use in the
root?
Fill?
Cap?

[@jackguess762]

Why do I trail to one side when walking the cup ?

[@tannerclower3967]

your favoriting one side when walking it, focus on even and full ranged back and forth movements

[@bretth9887]

Walking the cup wad developed for old shaky guys

[@brianbeaubien7371]

❤