I want to be able to chill like Daniel on that chair. Hood down legs crossed at my welding test. Thanks for taking the time to make these videos. They really help me out.
This is dope af! I’m a aerospace welder. I run tig all day, inco625, 718, and hastalloy x. Where I work we don’t weld pipe but I would love to do something like this and gain some experience.
💯🔥 good ass video. Simple but detailed explanations. Quality work goes a long way gonna have foreman calling you none stop. Stay safe brotha. The Weld Lab FTW! 💪🏽
Nice video man , I would love to learn how to weld but dont have nobody to teach me near by hopefully some day I have the chance to find a good welder just like you guys , keep uploading some tutorials really help
Great tutorial! Thanks for taking the time to share this knowledge. I know the both of you are busy and I hope that you know it's appreciated. I hope that you could help me by showing the whole Tig setup for the SA 200 and put the equipment links in your Amazon store.
Damn. Homie is very informative on welding. I will be recommending your channel for people who need help. I’m terrible at explaining things to people, I just weld and let them look/take notes by their observation. You should look into being a welding instructor in the future, when you’re ready to slow down that is.
@@TheWeldLab I’m from HTX too. Maybe we should link up one day and you can show me something on stick. I have zero experience on it. I’m a tig welder for Schlumberger and usually fuck w/stainless. I have a IG welding page too.
Put the wire on rite in between the bevel no inside the pipe but half of the wire will be inside and the other half on top of the bevel and if it’s till falling after that maybe turn the machine down ..on my next video I’ll try to show you what I mean
When I try this at the angle your holding it while walking ur cup, my filler rod balls up and starts to puddle long before I makes it to my weld puddle. Am I to hot?
You are obviously holding your torch at the wrong angle and your tungsten is directed at the filler wire so make sure your tungsten is directed into the prep making a keyhole
Truck video :Half ton,3/4 ton truck or Dually . I have a half ton and I did load up my sa-200 and did good for a léveled truck . Question is will a half ton get me by for a while currently in Tulsa welding school and yes I do have some experience in the oilfield as a labor ,parts runner and welder helper.
Hey bro can I get some of his info don’t have insta but rn I’m going to lee college and my next semester is tig on pipe my last semester was stick and tig on plate with the bevel but was just wondering if I can ask if I can get alil more practice I would really appreciate it bro just wanna get more experience I’m 22 and willing to learn more so I can be up there like you guys thanks bro hope I can get an answer back but I understand if not thanks
hello am in Australia.. Have a job that has a lot of steel flooring around job site. Laydown of electode a pain. Using a modern small inverter stick welder. Q) anywhere in USA / your company sell a stick electrode holder with ON OFF switch. ? Have never seem one. Only one on www is one for 12 v vehicle welders it seems. Seems a no brainer to have the option? any info appreciated. Has to deal with wide range amps no doubt.
Hey man I’ve just discovered your channel and wow I’m amazed by it your doing a phenomenal job! But I wanted to ask I’m pretty sure you always get this question but. How does someone new get their first job as a welder if the person has no connections in the industry? Especially in Houston since there’s a lot of companies to look at
you need to take any welding job you can. get even if they pay is not that good till you get some good experience ...also start make friends who are welders get some good contacts ..you in Houston they have plenty opportunity out here
That hot pass he burned the stamped end off his rod. Big mistake. If the QC walked up and wants to verify your using the correct filler metal. But you welded it off your rod. He could potentially make you grind that pass out. Never burn the stamped end away.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I want to be able to chill like Daniel on that chair. Hood down legs crossed at my welding test. Thanks for taking the time to make these videos. They really help me out.
This is dope af! I’m a aerospace welder. I run tig all day, inco625, 718, and hastalloy x. Where I work we don’t weld pipe but I would love to do something like this and gain some experience.
Bro you inspire me so much. I have a small structural business in Austin. Your videos make me want to get into pipe. Keep up the good work brother 💪
How’s work in Austin I always wanted to go work out there
TheWeldLab Structural is booming right now for me as a rig welder. Staying busy is not a problem
Hell yah bro
Best I ever heard it explained good stuff my bro
💯🔥 good ass video. Simple but detailed explanations. Quality work goes a long way gonna have foreman calling you none stop. Stay safe brotha. The Weld Lab FTW! 💪🏽
Thanks brother 🔥🤘🏼
About to take a 2in sch80 carbon test at a bean factory. Tig all the way out. Great video love the gaps!
Good luck 👍
How’d it go?
Nice video man , I would love to learn how to weld but dont have nobody to teach me near by hopefully some day I have the chance to find a good welder just like you guys , keep uploading some tutorials really help
You thought about going to school ?
TheWeldLab yes I am actually looking for one there’s one in Gillette Wyoming but I leave in rock spring Wyoming
Really good content. Keep it up and your channel will grow.
That’s brother ✊🏼
Great tutorial! Thanks for taking the time to share this knowledge. I know the both of you are busy and I hope that you know it's appreciated. I hope that you could help me by showing the whole Tig setup for the SA 200 and put the equipment links in your Amazon store.
thanks for watching...i just updated it in the description go check it out
@@TheWeldLab Awesome, will do! Thanks again 👍
pp
mpmpm
Good video got to the point and actually explained a lot
Damn. Homie is very informative on welding. I will be recommending your channel for people who need help. I’m terrible at explaining things to people, I just weld and let them look/take notes by their observation. You should look into being a welding instructor in the future, when you’re ready to slow down that is.
yeah man i love teaching and showing people how to weld ..i taught alot of people
@@TheWeldLab I’m from HTX too. Maybe we should link up one day and you can show me something on stick. I have zero experience on it. I’m a tig welder for Schlumberger and usually fuck w/stainless. I have a IG welding page too.
Tag me on your IG
@@TheWeldLab czarwelds
I subscribed from the first time I saw one of ur videos.
thanks!
Amps of rootpass?
Bout to go up in here and hook up a 3” schedule 40 open root with TIG. This helps a lot, much love hommie ✌️
What kind of lens you use for recording video it pretty clear ? I'm looking for one for one of helmet thanks
What up bro how can u proven ur root from falling are over penetration from 9 to 12 great video
Put the wire on rite in between the bevel no inside the pipe but half of the wire will be inside and the other half on top of the bevel and if it’s till falling after that maybe turn the machine down ..on my next video I’ll try to show you what I mean
Thanks man respect
Bro I need help with 7018 cap on bottom half of pipe could you show different techniques for top and bottom of pipe?
5g 6g?
TheWeldLab 5g
@@madrad3 10-4 ill keep you in mind
I have so much trouble with my caps I cool everything down but still get undercut
Slick brother , amazing video
thanks!
What amps for root weld and tacks ????? Thanks Mike
What do you mean by 3rd gear?
When I try this at the angle your holding it while walking ur cup, my filler rod balls up and starts to puddle long before I makes it to my weld puddle. Am I to hot?
You are obviously holding your torch at the wrong angle and your tungsten is directed at the filler wire so make sure your tungsten is directed into the prep making a keyhole
How to feed the filler rod
No lie I test on my 6g tig tomorrow 😅 I got this class of 2022
Truck video :Half ton,3/4 ton truck or Dually . I have a half ton and I did load up my sa-200 and did good for a léveled truck . Question is will a half ton get me by for a while currently in Tulsa welding school and yes I do have some experience in the oilfield as a labor ,parts runner and welder helper.
What size cup was that
Hey bro I need help with a 2 inch schedule 10 stainless I’m a big fanatic of your video 👍🏻
How can I help you? thaks!
What temperature should I run my root pass bro I have a test coming up
It’s my first time testing
What is your tig welding set up it is scratch start?
Can you show us your tig welding cable setup
Yessir ..I’ll do that for my next tig video
TheWeldLab thanks you man
Hey bro can I get some of his info don’t have insta but rn I’m going to lee college and my next semester is tig on pipe my last semester was stick and tig on plate with the bevel but was just wondering if I can ask if I can get alil more practice I would really appreciate it bro just wanna get more experience I’m 22 and willing to learn more so I can be up there like you guys thanks bro hope I can get an answer back but I understand if not thanks
can you email me theweldlab@gmail
I Sent you an email bro thanks
Can’t wait for this one.
🤘🏼💯
Well done
Well said and thank you for the instructions
hello am in Australia.. Have a job that has a lot of steel flooring
around job site. Laydown of electode a pain. Using a modern small
inverter stick welder. Q) anywhere in USA / your company sell a stick
electrode holder with ON OFF switch. ? Have never seem one. Only one on
www is one for 12 v vehicle welders it seems. Seems a no brainer to have
the option? any info appreciated. Has to deal with wide range amps no
doubt.
How long did that take
how do i find out about 1 on 1 thanks
Great video guys thanks a lot from CA
Thanks for the support ✊🏼
scratch start on all of it?
Run the hot pass around 200amps to flush it out.
Hey man I’ve just discovered your channel and wow I’m amazed by it your doing a phenomenal job! But I wanted to ask I’m pretty sure you always get this question but. How does someone new get their first job as a welder if the person has no connections in the industry? Especially in Houston since there’s a lot of companies to look at
you need to take any welding job you can. get even if they pay is not that good till you get some good experience ...also start make friends who are welders get some good contacts ..you in Houston they have plenty opportunity out here
If I move to Houston, can we be friends ?
How much will y’all charge for lessons I have my own machine and tig setup grinders wire etc
Great videos bro😎 🔥
🤘🏼💯
Good welding bro ❤️🔥
Love the videos bro
Thank is for the support!
Also what size of cup yall using
10
That hot pass he burned the stamped end off his rod. Big mistake. If the QC walked up and wants to verify your using the correct filler metal. But you welded it off your rod. He could potentially make you grind that pass out. Never burn the stamped end away.
What if you get arc blow ???
Hold ur breath
What kinda camera are you using for the arc shots ? Great footage !
sony 6400
Great tutorial bro why dont you get hjalmar aguilo would be a great video
I really don’t know him bro but I think that would be a good idea
@@TheWeldLab hes a cool guy you might hit him up see what he says bro
Nice job
Badass video very informative thank you
Glad you enjoyed it !
What tig rig u recommend
Ck 26 head and a twister hose
Great video man
Weldtube best school bro
Great video!
Thanks!
What are the chances of me making good money welding with felonies on my record
i know a bunch of welders with felonies you’ll be fine brother
Weld with them everyday, you’re good bro
Damn, cool andre3000 voiceover 🤣😂
Looks perfect Respect from germany
Good video brother
Thanks for watching!
Dude has skills but damn that's pushing it on reinforcement.
Excellent
Has videos en español bro !! 🔥
damn that was a good video men! gracias pariente jajaj
🤟🏼
I am a Dewalt man myself.
Respect.
Gracias todo un chaka
Damn thats a big gap! O.O
3/16 gap is where is at
Hell yeah ! That’s all I get
Want I want to know why you fast forward the slick cap you talking about why dont you show it so we can see what it looks like.🤔
👍🏻
💯
I won't my friend your welding mask with your autograph please.
Damn he's fast
Roots no good.... I can see a spot under flush and another over 1/8th...
🐸
No need for a gap that wide
Amps for the root?