Many people advise ordering a size up, but ordering an extra size gives me the impression that it fits well at first but after use it can be very loose, my foot measures 26cm. I am between 41 (259cm) or 42 (266cm)
@@otarkaeones1135 you can heat mold the boot multiple times so it fits better. I would always take the smallest size possible for your foot, where your toes don't hit in front. One very important thing is to use the smaller screws for the frame in front as the longer screw exerts some pressure on the bottom of the foot causing a lot of pain which can mistakenly make one think that the boot is too small. Your case is tough as it is possible the 41 has enough clearance for your foot, but if you have large feet I would go for the 42 boot and heat mold many times and put the tied laces under the flap.
@@downhillwings Thank you, you have given me some very useful advice, especially about the screw. I think I will go for the tightest one and shape it a lot :)
@@sabinag3523 I have known people riding the fr Igor and telling me they felt heavy. The iqon feel quite light, has a small liner, but I think the tr-10 model is even lighter (though trinity). Using a light weight speed skating frame with 3 (light, big core less urethane) wheels is probably the best way to keep the weight low.
@@downhillwings I will wait for Seba and then decide if I want to leave them or return them. I have frames with 165 mm mounting so TR 10 are not for me. And to be honest I am not convinced by ATOP lacing system.
Sympa cette vidéo ! Toujours content des Iqon CL10? Tu peux me redire où tu as acheté et comment ils chaussent ? J'hésite fortement à me faire une paire, car mes SEBA 2011 sont bientôt irréparables ! Et en bonus: me souviens plus si tu n'as dit si on peut les chauffer plusieurs fois ou juste une fois😅
Alors oui toujours très content. Je les ai achetées chez Bladeville et la taille j'ai respecté la longueur de mon pied et la taille correspondante(fiche website), mais si je reprends, je prends une taille au dessus pour plus de longueur. Je les ai déjà mis au four 3x, à chaque fois c'était mieux (au début pas agréable).
Beautiful downhilling, beautiful scenery in Lausanne! 👍🙏👏
Thank you BuDu :)
Many people advise ordering a size up, but ordering an extra size gives me the impression that it fits well at first but after use it can be very loose, my foot measures 26cm. I am between 41 (259cm) or 42 (266cm)
@@otarkaeones1135 you can heat mold the boot multiple times so it fits better. I would always take the smallest size possible for your foot, where your toes don't hit in front. One very important thing is to use the smaller screws for the frame in front as the longer screw exerts some pressure on the bottom of the foot causing a lot of pain which can mistakenly make one think that the boot is too small. Your case is tough as it is possible the 41 has enough clearance for your foot, but if you have large feet I would go for the 42 boot and heat mold many times and put the tied laces under the flap.
@@downhillwings Thank you, you have given me some very useful advice, especially about the screw. I think I will go for the tightest one and shape it a lot :)
Awesome,love it
Thank you, happy you liked the video!
Full push in to a magic slide, fuck yeah!
That is the mentality ;)
Hi, is there any chance you could give the weight of these skates boots only (I can't find it anywhere)
Had to take some time to check. 800gr boot only I believe, with frame and wheels (Iqon decode pro + 3x125mm hydros) I am around 1.5kg per boot.
@@downhillwings Thank you very much.
I'm looking for lightweight boots, I've heard that these iqons are like that, but I was impatient and ordered seba high light carbon pro today.
@@sabinag3523 I have known people riding the fr Igor and telling me they felt heavy. The iqon feel quite light, has a small liner, but I think the tr-10 model is even lighter (though trinity). Using a light weight speed skating frame with 3 (light, big core less urethane) wheels is probably the best way to keep the weight low.
@@downhillwings I will wait for Seba and then decide if I want to leave them or return them. I have frames with 165 mm mounting so TR 10 are not for me. And to be honest I am not convinced by ATOP lacing system.
Which camera did you use?
Blackmagic cinema camera 2.5K (OG)
@@downhillwings Thanks
Sympa cette vidéo ! Toujours content des Iqon CL10? Tu peux me redire où tu as acheté et comment ils chaussent ? J'hésite fortement à me faire une paire, car mes SEBA 2011 sont bientôt irréparables ! Et en bonus: me souviens plus si tu n'as dit si on peut les chauffer plusieurs fois ou juste une fois😅
Alors oui toujours très content. Je les ai achetées chez Bladeville et la taille j'ai respecté la longueur de mon pied et la taille correspondante(fiche website), mais si je reprends, je prends une taille au dessus pour plus de longueur. Je les ai déjà mis au four 3x, à chaque fois c'était mieux (au début pas agréable).
@@downhillwings cool, merci des infos. Génial qu'on puisse modifier plusieurs fois ! Tu m'avais dit mais j'avais oublié !
4x100or 4x90?
4x110 rockered, Iqon CL Decode Pro 110