I noticed you didn’t glue the safety switch area, very “safety first” of you! I’m glad you commented on my video a few weeks ago so I could find your channel. Love the content, you have a new subscriber!
That’s awesome! Thanks for watching and taking the time to leave a comment. I spend a lot of time trying to hook switches up that others have bypassed on these old mowers.
Mr Bald Eagle, I fixed my seat just like your video. I used an oscillating tool to get the old glue out of the channel. Used the sand paper & Emory cloth to get it clean. Bought the spray and glue, like you had listed. I used the clamps and even had one slide off, just like your video. I had to use some ratchet straps to hold the seat down, as I didn't have enough of the bigger clamps. All turned out great. I was going to post some pictures but I guess you can't do that on RUclips. New hood, took the fenders off and foot pads off. Sanded and painted. Looks great. Thanks again.
@@baldeagle242 I will check it out. I noticed yesterday, the seat is already coming lose on the bottom. May have to reglue on the bottom side, towards the steering wheel.
Great fix using contact cement. The seat was originally glued with hot glue but most people don't have a big enough glue gun to do this job. The problem with most adhesives is that they have to have air to cure. Construction adhesive needs air to cure and because you are clamping plastic against plastic it can't dry or cure. You have solved the problem.
So far it’s holding up very well. I’ve been using this mower all summer and it’s still holding up. Thanks for taking the time to leave a comment. I hope to see you around on future videos. 😁👍
Great job showing and telling, keep up the good work. Getter done so you can cut that grass great job on the seat. I got a l 130 John deer seats got bad place’s on it, got to fix it some day well see ya next time see ya bye.
Nice fix... if you did that for a customer whats the total cost? Buying the replacement seat, glue, enough clamps labor cost. Nice to have a good looking seat. Make the mower stand out.
This is more of a repair for an owner that has the time to put into it. The total cost of materials for this job was around $30 including the clamps. It took me about an hour and a half total labor time over two days by the time the adhesive cured. For someone to do this in a shop would not be cost effective and a new seat would be the better way to go. Thanks for watch and taking the time to comment. 😁👍
You’re welcome my friend. I had a few people tell me the subscribed to your channel after seeing the shoutout. Hopefully we will get you to that magical 1000 soon. If anyone hasn’t checked out @LewisMowersandBoats yet consider checking him out. Great guy with a lot of knowledge. 😁👍
I have tried 3M Super 77 spray adhesive on seat and it didn't work. Work great for stickers that blow off when pressure washing. This requires a little work for sure. Do you think Liquid Nails that is made for plastic would work? Great job!
Good show..i gave you a shout out in my latest video because i have 2 seats i need to fix and i have watched many seat repair videos and yours is the best
You’re welcome. Thanks for taking the time to leave a comment. Here’s a link to other videos I’ve made that you may find interesting. Baldeagle242 Video History! ruclips.net/p/PL5_ZXmQpcjpZLAMEskeAYolqvhFSN_X4m
I actually just finished a few other things on this mower today and posted a short little video earlier today. It’s been about four months since I fixed the seat and so far it’s held up very well. ruclips.net/user/shortsowpZPZ9Ihrk?si=Mb2EnAqyOoaPxBKz
Thank you for the info I’m going to Home Depot tomorrow to get the glue tube of for the gun why can’t you just use it on all of it ? Why do you need two different Loctite glue’s
@@josephwagner2729 You don’t need much on the foam itself. My concern was that the adhesive would be too aggressive and may cause the foam to deteriorate. If I remember correctly there was also a notice on the adhesive not to use it on foam. I recommend reading the label before trying it. If you go forward with it let us know how it works out.
Great Baldy! Only the top part of my seatback has come unglued. So I will fix it using your method. But since only the top has separated, do ya recommend removing the whole seat cushion or do ya think I can get away with just addressing the part of it that has separated.
+@duaneaho2805 It’s holding up very well. Thanks for watching! Here’s a link to other videos I’ve posted that you may find useful. ruclips.net/p/PL5_ZXmQpcjpac4UV8OW8g-IWVCR8tqy79&si=RKfnQL-PAcZFy67a
Emery cloth, often referred to as "sandpaper on a cloth," is a versatile abrasive material that is commonly available in the form of a roll. It consists of a durable fabric backing embedded with abrasive particles. The abrasive coating on emery cloth is typically made of aluminum oxide or silicon carbide, which provides the necessary grit for sanding and smoothing surfaces. On the other hand, Scotch Brite pads offer a different approach to abrasive materials. These pads are composed of a porous fiber matrix infused with abrasive particles. The fibers create a three-dimensional structure that helps in distributing the abrasives evenly across the surface being worked on. Scotch Brite pads are designed to be more flexible and conform to various shapes and contours, making them suitable for intricate tasks. Either emery cloth or Scotch Brite pads would be suitable for the job at hand. Both options can effectively accomplish tasks that involve surface preparation, cleaning, or light sanding. Emery cloth, with its sandpaper-like texture, provides a more aggressive cutting action and is ideal for tasks that require heavier material removal or rougher surfaces. It is commonly used in metalworking and woodworking applications, where it can smooth rough edges, remove rust or paint, and prepare surfaces for painting or finishing. On the other hand, Scotch Brite pads are known for their versatility and gentle yet effective abrasion. The porous fiber structure allows for better control and finesse, making them suitable for tasks such as cleaning delicate surfaces, removing light blemishes or stains, and achieving a smooth finish on various materials. Scotch Brite pads are commonly used in automotive detailing, household cleaning, and even in food preparation areas where non-scratch materials are required. Ultimately, whether you choose emery cloth or Scotch Brite pads will depend on the specific requirements of your project, the type of surface you are working on, and the level of abrasion needed. Both materials have their unique characteristics and can be effective in their respective applications.
I don’t see many Gators here. I’m not sure how the seats mount onto them. I’d go to eBay or Amazon and see if you can find a listing that shows the mounting holes and location. I’m sure it can be “made to work” but I’m not sure if it will bolt right on or not.
No one can beat how terrible MTD seats are the very worst ever made Pure junk Hoping china or Japan will make a fairer price and quality seat, it wouldn’t take much 😢
Great Video Thank yo for sharing, Now I can show my wife why I have so many clamps LOL
😁👍
I noticed you didn’t glue the safety switch area, very “safety first” of you!
I’m glad you commented on my video a few weeks ago so I could find your channel. Love the content, you have a new subscriber!
That’s awesome! Thanks for watching and taking the time to leave a comment. I spend a lot of time trying to hook switches up that others have bypassed on these old mowers.
Thank you for the video. Saved me from buying a new seat.
Mr Bald Eagle, I fixed my seat just like your video. I used an oscillating tool to get the old glue out of the channel. Used the sand paper & Emory cloth to get it clean. Bought the spray and glue, like you had listed. I used the clamps and even had one slide off, just like your video. I had to use some ratchet straps to hold the seat down, as I didn't have enough of the bigger clamps. All turned out great. I was going to post some pictures but I guess you can't do that on RUclips. New hood, took the fenders off and foot pads off. Sanded and painted. Looks great. Thanks again.
Thats awesome! I have Facebook and Instagram accounts with the same BALDAGLE242 name. You’re welcome to share pics or videos there if you like. 😁👍
@@baldeagle242 I will check it out. I noticed yesterday, the seat is already coming lose on the bottom. May have to reglue on the bottom side, towards the steering wheel.
Great fix using contact cement. The seat was originally glued with hot glue but most people don't have a big enough glue gun to do this job. The problem with most adhesives is that they have to have air to cure. Construction adhesive needs air to cure and because you are clamping plastic against plastic it can't dry or cure. You have solved the problem.
So far it’s holding up very well. I’ve been using this mower all summer and it’s still holding up. Thanks for taking the time to leave a comment. I hope to see you around on future videos. 😁👍
Nice job BaldEagle, I've glued a few seats in but never thought of the t-shirt and hole trick, great stuff..... thanks brother. 👍👊
Thank you John. 😁👊
Really good looking fix!
Thank you David. I appreciate you stopping by and taking the time to leave a comment. 😁👍
It really came out looking good 👍
Thank you Bill. 😁👍
Great job as always my friend.
Thank you my friend. I appreciate you stopping by and taking the time to leave a comment. 😁👍
Great job showing and telling, keep up the good work. Getter done so you can cut that grass great job on the seat. I got a l 130 John deer seats got bad place’s on it, got to fix it some day well see ya next time see ya bye.
Nice job BaldEagle, the seat repair turned out really good!
Thank you my friend. 😁👍
Good idea on drawing the seat cover down tight. Nice job.
+John G Thank you! I hope to see you around on future videos. 😁👍
Thanks for the video and the information and tips..
Thanks for stopping by my friend. I hope you are doing well. 😁👍
@@baldeagle242 all good mate
Excellent! Thanks for sharing! I've been putting off fixing the unglued seat on my 13 year old zero turn for about 2 years. Not anymore!
@Daniel Webster Thank you for taking the time to share your comment! I hope to see you around on future videos. 😊👍
Thank you, that's my next project.
Nice fix... if you did that for a customer whats the total cost?
Buying the replacement seat, glue, enough clamps labor cost.
Nice to have a good looking seat. Make the mower stand out.
This is more of a repair for an owner that has the time to put into it. The total cost of materials for this job was around $30 including the clamps. It took me about an hour and a half total labor time over two days by the time the adhesive cured. For someone to do this in a shop would not be cost effective and a new seat would be the better way to go. Thanks for watch and taking the time to comment. 😁👍
Excellent video, and a great job done 👍
Thank you. 😁👍
great videos. you address issues many of us have in a clear, well communicated manner.
Thanks to Chicanic for the reference.
Thanks you, and thanks for letting me know Bre sent you. 😁👍
Man that is a wonderful way of getting that seat on 😊 thanks for sharing brother
You’re welcome my friend. I had a few people tell me the subscribed to your channel after seeing the shoutout. Hopefully we will get you to that magical 1000 soon.
If anyone hasn’t checked out @LewisMowersandBoats yet consider checking him out. Great guy with a lot of knowledge. 😁👍
I have tried 3M Super 77 spray adhesive on seat and it didn't work. Work great for stickers that blow off when pressure washing. This requires a little work for sure. Do you think Liquid Nails that is made for plastic would work? Great job!
I’ve never tried liquid nails. I’m not sure.
Good show..i gave you a shout out in my latest video because i have 2 seats i need to fix and i have watched many seat repair videos and yours is the best
Thank you! Feel free to edit your comment and post a link here if you like. I’ll check it out. 😁👍
Nice job
Thank you my friend. I appreciate you taking the time to leave a comments. 😁👍
I used the glue to hold down out door carpets, cheaper in gallon can that was left over, worked great
Awesome video. I followed your every step. Worked perfect.
That’s awesome! Thanks for taking the time to leave a comment. We hope to see you around on future videos. 😁👍
Really professional job...both the repair and the video. BTW, are you getting a paycheck from Loctite?:)
Oh yeah that is great stuff man!
Thank you,Dave. I hope you are doing well. 😁👍
Love this . THANKYOU FOR SHARING YOUR KNOWLEDGE!!
You’re welcome. Thanks for taking the time to leave a comment. Here’s a link to other videos I’ve made that you may find interesting. Baldeagle242 Video History!
ruclips.net/p/PL5_ZXmQpcjpZLAMEskeAYolqvhFSN_X4m
Nice informative video. How long ago did you make the video? And are you still pleased with the Loctite?
I actually just finished a few other things on this mower today and posted a short little video earlier today. It’s been about four months since I fixed the seat and so far it’s held up very well. ruclips.net/user/shortsowpZPZ9Ihrk?si=Mb2EnAqyOoaPxBKz
Thank you for the info I’m going to Home Depot tomorrow to get the glue tube of for the gun why can’t you just use it on all of it ? Why do you need two different Loctite glue’s
@@josephwagner2729 You don’t need much on the foam itself. My concern was that the adhesive would be too aggressive and may cause the foam to deteriorate. If I remember correctly there was also a notice on the adhesive not to use it on foam. I recommend reading the label before trying it. If you go forward with it let us know how it works out.
is wife will make him to super now lollllllllllllll
Great Baldy! Only the top part of my seatback has come unglued. So I will fix it using your method. But since only the top has separated, do ya recommend removing the whole seat cushion or do ya think I can get away with just addressing the part of it that has separated.
I would only address the part that has come loose.
Looks great! How’s it holding up..I’m about to go through this operation
+@duaneaho2805 It’s holding up very well. Thanks for watching! Here’s a link to other videos I’ve posted that you may find useful. ruclips.net/p/PL5_ZXmQpcjpac4UV8OW8g-IWVCR8tqy79&si=RKfnQL-PAcZFy67a
Really nice! Thanks for sharing
Thank you. We hope to see you around on future videos. 😁👍
Thank you for that video looks promising
Thanks for taking the time to leave a comments. We hope to see you around on future videos. 😁👍
Thank you
Have you had any experiencewith a lumbar support seat that won't adjust and is stuck?
Yes, generally that’s caused be rust and corrosion. If it’s not to bad a light penetration oil can free it up and get it working again.
Emery cloth? Isn’t that a Scotch Brite pad or equivalent?
Emery cloth, often referred to as "sandpaper on a cloth," is a versatile abrasive material that is commonly available in the form of a roll. It consists of a durable fabric backing embedded with abrasive particles. The abrasive coating on emery cloth is typically made of aluminum oxide or silicon carbide, which provides the necessary grit for sanding and smoothing surfaces.
On the other hand, Scotch Brite pads offer a different approach to abrasive materials. These pads are composed of a porous fiber matrix infused with abrasive particles. The fibers create a three-dimensional structure that helps in distributing the abrasives evenly across the surface being worked on. Scotch Brite pads are designed to be more flexible and conform to various shapes and contours, making them suitable for intricate tasks.
Either emery cloth or Scotch Brite pads would be suitable for the job at hand. Both options can effectively accomplish tasks that involve surface preparation, cleaning, or light sanding.
Emery cloth, with its sandpaper-like texture, provides a more aggressive cutting action and is ideal for tasks that require heavier material removal or rougher surfaces. It is commonly used in metalworking and woodworking applications, where it can smooth rough edges, remove rust or paint, and prepare surfaces for painting or finishing.
On the other hand, Scotch Brite pads are known for their versatility and gentle yet effective abrasion. The porous fiber structure allows for better control and finesse, making them suitable for tasks such as cleaning delicate surfaces, removing light blemishes or stains, and achieving a smooth finish on various materials. Scotch Brite pads are commonly used in automotive detailing, household cleaning, and even in food preparation areas where non-scratch materials are required.
Ultimately, whether you choose emery cloth or Scotch Brite pads will depend on the specific requirements of your project, the type of surface you are working on, and the level of abrasion needed. Both materials have their unique characteristics and can be effective in their respective applications.
Can I use mineral spirits instead of acetone
I’m sure mineral spirits would work also.
I found 2 Oem john deere Gator seats for $60 for both no cracks they just came loose would that fit on a John deere lx 280?
I don’t see many Gators here. I’m not sure how the seats mount onto them. I’d go to eBay or Amazon and see if you can find a listing that shows the mounting holes and location. I’m sure it can be “made to work” but I’m not sure if it will bolt right on or not.
How’s it holding up?
@@marklengal9990 Grass has been to dry to cut the past two weeks but the seat is still holding up great.
@@baldeagle242 I’m going to go out tonight and get some glue and clamps. My grass is dry to so it a good time thanks again
@@marklengal9990 Awsome! I’ve done this 4 or 5 times since making this video and it works very well.
👍👏🏻
😁👍
Oh wow ok thx
No one can beat how terrible MTD seats are the very worst ever made
Pure junk
Hoping china or Japan will make a fairer price and quality seat, it wouldn’t take much 😢
I have an old mower with metal seat, cushion came off, any ideas?
I’ve never tried to repair one of the metal seats. Hopefully someone else can comment with opinions they’ve used.