I just sold 2 sets of Badlands after using them for over a year. They are ok, but that plastic hex strips easy. Not popular 1/5 scale rire, Xmaxx tire, lol. I went Vitavon wheels Viper uber spike and Giant grip tires with no issues. Castle 800 n 1100kv geared 18/50. I dont do speed runs, was clocked over 70mph, but just bash. Nice to have power when needed. Giant grips hold up with 1100kv with foams taped, and Vitavon wheels keep ya planted. I am impressed.
Yep they can stretch under rpm and then the pin can offset to one side then it's all over the pin will fly out. I learned that from junk china drive shafts
That's awesome Joe I have the v1 DBXLE i definitely needs spacers running duratrax hatchet x they rub a bit some more steering on mine would be sweet the spool is a beast
I locked the center diff, 18t pinion and badland.... it was the perfect set up for increased top speed, acceleration and duration. nothing over heated and i'm pulling wheelies
Its a little hotter because you arent getting slip from the center diff and your badlands being so heavy, but the mashers and dropping a tooth on the pinion i think will make it perfect
@@ExocagedRC they look like awesome tires, id love to see weight and size comparisons with the mx43 badlands and rtr tires like the xmaxx and kraton 8s tires
May just need to find a better cooling solution as well.Trying to figure that issue out for myself. I keep breaking ESC fans on my max5. Weight is probably your biggest issue however. Try the Duratrax hatchet x I think they are considerably lighter than the prolines. I’d have a set of prolines and a back up set at the ready for my Xmaxx if they weren’t so darn heavy.
Add a big cap pack should help with heat little dropped around 20 degrees +in my hobbywing system done lot test and hobbywings esc really benefits from a cap pack .
hey exocaged do the stock wheel nuts fit on the dgi hex extenders? im looking to buy a pair to run my proline mashers. just wanted know if they do or if ill have to mod it.
Joe can’t wait to see those Mashers perform. I know you gonna eventually stick one those 1100kv in their. I’m hoping these voltage regulators coming out soon. Image that cooler runs.
Mc2 racing has that 6 nut/bolt hex adapter kit, don’t know what sizes but definitely cheaper than new tires/rims. And they’re fairly new so would make a good test/review. Sick build, when u going to get the outcast 8s out again brother?😊👊🏼✌🏼🙏🏼
Awesome upgrades , loving that centre locker especially 😍
Great vid as always 👍👌👍
Joe you urgently need some good fans in the machine if you're not going to cook all this... love the build my go to some Vitavon goods 😍
Got fans on it now, ran it again and a little better, got an xlx2 on it for the next run.
I just sold 2 sets of Badlands after using them for over a year. They are ok, but that plastic hex strips easy. Not popular 1/5 scale rire, Xmaxx tire, lol. I went Vitavon wheels Viper uber spike and Giant grip tires with no issues. Castle 800 n 1100kv geared 18/50. I dont do speed runs, was clocked over 70mph, but just bash. Nice to have power when needed. Giant grips hold up with 1100kv with foams taped, and Vitavon wheels keep ya planted. I am impressed.
I haven't ever been a fan of an o-ring holding a pin in, anything! Locktite & a setscrew beats an o-ring any day
Yep they can stretch under rpm and then the pin can offset to one side then it's all over the pin will fly out. I learned that from junk china drive shafts
Could use a snap ring in place of an o ring
I cut out a notch for the set screw on them today
That's awesome Joe I have the v1 DBXLE i definitely needs spacers running duratrax hatchet x they rub a bit some more steering on mine would be sweet the spool is a beast
Sounded like a rocket ship on that full speed accross the field
Big Ole spool 👍🏾👍🏾👍🏾what's next?
love the vids, diff locker sold out world wide, checked every shop
Poor some epoxy in that wheel hex, stick the DGI extender OILED in it and you are done with brand new 24mm wheel hex. Thanks for video 👍😎
Hey Joe try a open end nut for the wheel hex's instead of the closed end one
DDM spiked wheel nuts bro…..
this rig is violent with the spool !!
I locked the center diff, 18t pinion and badland.... it was the perfect set up for increased top speed, acceleration and duration. nothing over heated and i'm pulling wheelies
Running 800kv castle No problems major horsepower fast fast fast excellent set up I suggest you do it
That locked diff isn't going to end well.!!!!!
Been running locker in my center diff since the dbxl-e almost first came 0 problems!
How do you like that center locker?
Edit: Tried the locker, unless you're drag racing it's useless. It will tear up your drivetrain when bashing.
🎤Singin’ the wheel hex blues 🎶
Rims were even hot 🔥
Its a little hotter because you arent getting slip from the center diff and your badlands being so heavy, but the mashers and dropping a tooth on the pinion i think will make it perfect
I ran the mashers today, I like em.
@@ExocagedRC they look like awesome tires, id love to see weight and size comparisons with the mx43 badlands and rtr tires like the xmaxx and kraton 8s tires
Have you tried the Losi 5ive-t wheels & Proline Trencher tires? I use them on my dbxl, gas version, & they work fine!
May just need to find a better cooling solution as well.Trying to figure that issue out for myself. I keep breaking ESC fans on my max5. Weight is probably your biggest issue however. Try the Duratrax hatchet x I think they are considerably lighter than the prolines. I’d have a set of prolines and a back up set at the ready for my Xmaxx if they weren’t so darn heavy.
Awesome video... Lots of powwaahhh! Did it feel like power was transferred evenly front and rear?
yeah, I like the spool in there
Hi. Great video! Did you make any modifications to the Proline Badlands tires to fit the Losi DBXL E 2.0? Or you just used the DGI hex? Thanks.
Hey what are the names of those shelf’s I need some for my cars they all over my house
Add a big cap pack should help with heat little dropped around 20 degrees +in my hobbywing system done lot test and hobbywings esc really benefits from a cap pack .
hey exocaged do the stock wheel nuts fit on the dgi hex extenders? im looking to buy a pair to run my proline mashers. just wanted know if they do or if ill have to mod it.
Do you have the website name
Buenas! Podria decirme que baterías máximas y gordas podría poner en este coche sin necesidad de modificar nada más?
Dose anyone have any ideas on why my kraton 6s eats pinions for breakfast luck and dinner? And there the Robinson racing extra hard
The parts on that are even huge think it's bigger than one of those smart cars
Man that's always disappointing lol stripped a few myself
I just picked up my DBXL gas version. Waiting on my center diff tower to come in. Once I’m done I’d love to race and see the difference.
Stock lugs are better to keep the wheel tight them won't lock down
OS8 connectors? Like ASAP my man.
got em on there now
Joe can’t wait to see those Mashers perform. I know you gonna eventually stick one those 1100kv in their. I’m hoping these voltage regulators coming out soon. Image that cooler runs.
Mc2 racing has that 6 nut/bolt hex adapter kit, don’t know what sizes but definitely cheaper than new tires/rims. And they’re fairly new so would make a good test/review. Sick build, when u going to get the outcast 8s out again brother?😊👊🏼✌🏼🙏🏼
actually soon.
@@ExocagedRC lol i saw that thanks man! It was great cant wait to see more, what do u think about adding some shims to them diffs?
use 50c or larger batterys
these were 80c
#1 x3😁 today
I will duplicate this thanks
Sounds terrible. Is that normal? The grass cooked your stuff.