the LB or RB are used used to hold and run in some games like monster hunter . i don't many of us have the tools or expertise to change part, but i think buying the thundrobot G80 is a better platform for the modules , and there is a japanese reviewer showed the JS20 the TMR modules , and they are sold by a single destriputer in aliexpress but they don't ship worldwide .
New Switch (select 4.5mm) s.click.aliexpress.com/e/_DEKXwJx Low melt Solder (I only found the correct description on amazon the aliexpress link is a similar product but I'm not sure if it does the same thing) amzn.to/3Zss1E5 amzn.to/3Zy8eDv pt.aliexpress.com/item/1005006332569358.html
I was planning on suggesting something similar for a video. Recently I got a vader 4 pro I was looking into modding the mouse switches to make them hotswappable or at least get a highly rated switch instead like the kailh gm 8.0 but unfortunately due to the type of mouse switch they used I dont know if it possible. And this could also work for the back buttons.
Yo justamente antes de comprar el control pense en hacer esta modificación debido a que yo uso mucho los back switches. Estoy esperando a que me lleguen los repuestos para hacer la modificación
New Switch (select 4.5mm) s.click.aliexpress.com/e/_DEKXwJx Low melt Solder (I only found the correct description on amazon the aliexpress link is a similar product but I'm not sure if it does the same thing) amzn.to/3Zss1E5 amzn.to/3Zy8eDv pt.aliexpress.com/item/1005006332569358.html
Hey Great video! A quick question if you dont mind, should I upgrade my controller firmware even if it works fine? I m worried if something wrong happens, I m using wgp14 nova pro
The issue is not stem from switch, it needs debouncing circuitry. I can run the old switch with perfect accuracy with my costum addition if you pay and cooperate with me.
I returned mine on day 1. The sticks on mine didn't lock in well and would pop up their shaft everytime I pushed forwards. Ended up returning and getting the gamesir cyclone 2, full mechanical, has two stage triggers and TMR sticks and better software and compatibility.
@@sendnoodles2486 I think I will get the Cyclone2 after I get my money back. I wanted to give this brand a chance however, they really need to improve this is really unacceptable
Hi thanks for your videos...which is better between 8bit do ultimate 2c wukong vs easy smx x10? my actual xbox x controller start drifting and i wanna replace it with hall effect sticks pad with similar rumble..you have tested both ...in my region price of these 2 are similar
Tough choice both are very close in terms of quality but if you're used to xbox ergonomics go with the easysmx x10, it has better latency, the buttons are fully mechanical and it has more connectivity options than the ultimate 2c
@@VKsChannel huh did u already forgot your own review of it ???? u said it yourself it has a joystick problem that can't be fixed even after recalibration
Algo que me incomoda muito e foi o que me fez desfazer de 2 unidades do V2 são os gatilhos traseiros, são um nojo só, tem nada a ver com a versão anterior V1, parece que tem areia dentro do RT e LT, fica raspando e faz um barulho estranho, qualquer outro controle até mesmo de marcas duvidosas tem melhores RT e LT que esse controle, depois se puder fazer um video sobre esse tema também seria de grande ajuda, quem sabe a Machenike vê o video e corrije isso também, sou apaixonado pelo G5 Pro desde sua primeira versão e aguardei ansioso pela atualização v2 dele e quando lançam eles fazem esse tipo de coisa horrivel, o controle parece ser inferior em termos de qualidade em relação ao primeiro
também gosto mt dele ter 2 botões no topo e 2 botões trazeiros, também é bem facil de programar, mas esses defeitos com os botões de atalho e os gatilhos estragaram o controle
@@VKsChannel Verdade, a pior coisa é estarmos ansiosos por um produto que tem tudo pra ser perfeito e ver algo ser lançado assim dessa forma, pior que vendo pelo seu vídeo tem solução de facil correção para uma empresa que tem pessoas que são pagas para fazer esse tipo de trabalho e pelo jeito tem grandes chances de ficar por isso mesmo
well 1 is for cost, these buttons are less used than the ABXY second is because it's hard to put optical sensors on the top of the PCB where the buttons should be more compact, but they shouldn't have used poor quality switches
Surprise, the back buttons, on the G6pro are also crap. Machenike does not make sensible buttons. Already at. G6 were the shit. And still now. Even cheaper than the Thunderobot G80, although it looks almost identical. In fact, I can't recommend the Machenike or the Thunderobot. The two copy each other's shit.
maaaaaan i actually didnt buy it because of this and now thers a fix but still thanks
the LB or RB are used used to hold and run in some games like monster hunter . i don't many of us have the tools or expertise to change part, but i think buying the thundrobot G80 is a better platform for the modules , and there is a japanese reviewer showed the JS20 the TMR modules , and they are sold by a single destriputer in aliexpress but they don't ship worldwide .
We Algerians say: buy it today, paint it tomorrow.
I hate mechanical switches because of my GBA SP dpad when i was a kid. Also, pc mice.
There’s a brand new GameCube style switch controller for Metro fighters, it’s call the battlerGC pro
I was pretty close to buying this. Good thing i held off, what are your top 5 controllers?
Can you please share the link of those 4.5mm Buttons from Ali? They seem to be a great choice, many thanks for your help and Support!
New Switch (select 4.5mm)
s.click.aliexpress.com/e/_DEKXwJx
Low melt Solder
(I only found the correct description on amazon the aliexpress link is a similar product but I'm not sure if it does the same thing)
amzn.to/3Zss1E5
amzn.to/3Zy8eDv
pt.aliexpress.com/item/1005006332569358.html
I was planning on suggesting something similar for a video.
Recently I got a vader 4 pro I was looking into modding the mouse switches to make them hotswappable or at least get a highly rated switch instead like the kailh gm 8.0 but unfortunately due to the type of mouse switch they used I dont know if it possible. And this could also work for the back buttons.
Yo justamente antes de comprar el control pense en hacer esta modificación debido a que yo uso mucho los back switches. Estoy esperando a que me lleguen los repuestos para hacer la modificación
link of low melt solder?
New Switch (select 4.5mm)
s.click.aliexpress.com/e/_DEKXwJx
Low melt Solder
(I only found the correct description on amazon the aliexpress link is a similar product but I'm not sure if it does the same thing)
amzn.to/3Zss1E5
amzn.to/3Zy8eDv
pt.aliexpress.com/item/1005006332569358.html
Hey Great video! A quick question if you dont mind, should I upgrade my controller firmware even if it works fine? I m worried if something wrong happens, I m using wgp14 nova pro
If it ain't broken don't fix it
The issue is not stem from switch, it needs debouncing circuitry. I can run the old switch with perfect accuracy with my costum addition if you pay and cooperate with me.
Machenike G5 pro has the same problem ???
I dont know
Oooh, it's a good thing I haven't received this yet, maybe I need to cancel this purchase, thanks for this review 😸
I returned mine on day 1. The sticks on mine didn't lock in well and would pop up their shaft everytime I pushed forwards. Ended up returning and getting the gamesir cyclone 2, full mechanical, has two stage triggers and TMR sticks and better software and compatibility.
@@sendnoodles2486 I think I will get the Cyclone2 after I get my money back. I wanted to give this brand a chance however, they really need to improve this is really unacceptable
Hi thanks for your videos...which is better between 8bit do ultimate 2c wukong vs easy smx x10? my actual xbox x controller start drifting and i wanna replace it with hall effect sticks pad with similar rumble..you have tested both ...in my region price of these 2 are similar
Tough choice both are very close in terms of quality
but if you're used to xbox ergonomics go with the easysmx x10, it has better latency, the buttons are fully mechanical and it has more connectivity options than the ultimate 2c
@VKsChannel thank you for the answer... the rumble of the ultimate 2c is bad? which have the better rumble between these 2?
both has regular rumble motors there is no difference
Now fix Mobapad M6 hd joystick problem to make them perfect and your missing om this planet will be completed
what problem?
@@VKsChannel huh did u already forgot your own review of it ???? u said it yourself it has a joystick problem that can't be fixed even after recalibration
@@kamm3021 I make so many reviews that I don't remember anymore, do you have a timestamp of the video?
Algo que me incomoda muito e foi o que me fez desfazer de 2 unidades do V2 são os gatilhos traseiros, são um nojo só, tem nada a ver com a versão anterior V1, parece que tem areia dentro do RT e LT, fica raspando e faz um barulho estranho, qualquer outro controle até mesmo de marcas duvidosas tem melhores RT e LT que esse controle, depois se puder fazer um video sobre esse tema também seria de grande ajuda, quem sabe a Machenike vê o video e corrije isso também, sou apaixonado pelo G5 Pro desde sua primeira versão e aguardei ansioso pela atualização v2 dele e quando lançam eles fazem esse tipo de coisa horrivel, o controle parece ser inferior em termos de qualidade em relação ao primeiro
também gosto mt dele ter 2 botões no topo e 2 botões trazeiros, também é bem facil de programar, mas esses defeitos com os botões de atalho e os gatilhos estragaram o controle
@@VKsChannel Verdade, a pior coisa é estarmos ansiosos por um produto que tem tudo pra ser perfeito e ver algo ser lançado assim dessa forma, pior que vendo pelo seu vídeo tem solução de facil correção para uma empresa que tem pessoas que são pagas para fazer esse tipo de trabalho e pelo jeito tem grandes chances de ficar por isso mesmo
man how awful has to be doing this for a new control
Why would they have optical face buttons but use the crappiest back buttons I've seen
well 1 is for cost, these buttons are less used than the ABXY second is because it's hard to put optical sensors on the top of the PCB where the buttons should be more compact, but they shouldn't have used poor quality switches
@VKsChannel yeah I wouldn't expect to see optical on the back buttons but damn not even a good switch is just... Odd choice really
Surprise, the back buttons, on the G6pro are also crap. Machenike does not make sensible buttons. Already at. G6 were the shit. And still now. Even cheaper than the Thunderobot G80, although it looks almost identical. In fact, I can't recommend the Machenike or the Thunderobot. The two copy each other's shit.