Amazing. I knew some chinese manufacturer would someday make a good and cheap ambilight/dreamscreen/lightberry alternative. Will definitely buy this in the future.
@@sabrinasanchez5802 Yeah cause all the advertising i seen, it appeared to be used on a TV! If thats the case then that sucks, cause I dont have a computer!
very satisfied from the product but the lights go to sleep after 5 minutes of nothing happening, I don't want that, could not find any settings for it, what can I do
I got this one. But not working. Program has some problems. New laptop windows 10. But don't wanna install. Lights works if I connect with my android. But after few minutes lights don't wanna work.
from what i've read, drm protected content like netflix doesnt work. there might be a paid app that would allow netflix to work but i have not looked in to that yet.
No it does not unfortunatelly. This litterly is an arduino Uno, WS2812B led strip & a 5v 9-12A powersupply. I've built a similar thing with an arduino nano, for about the same cost (40 bucks) :) for a TV you'd need a raspberry Pi, an HDMI splitter and some more stuff (Great Scott has an older vid on that)
so I got this but the lights are responding slowly to whats on screen and gives flickering effect. Can you tell me what arduino board you use on this? I can try and compile fast led code on this to see if it works any better.
Help please. Probably i cannot see what com am I using. But when I check on device manager it says port is CoM 1. But the light is not turning on. Please help.
I have 2 monitors side by side with an extended desktop (3840x1080). Is the box able to control ambilight for both monitors or do I need one box for each monitor?
I tried it today, seems like using the AmbiBox you can only capture from 1 monitor. Also the config for two monitors is a mess :/ Currently using this as a bias light
Hi I have watched this video but still i cant figure out how to make my led start at top left corner, it is like no matter what i do i cant get it to count from 5 led down from top left corner and then clockwise I have set my zone/led count to 175 as i should have, but my max offset keeps me from having my starting point where i want to have it??
when i try to install ambibox setup, i get error saying. could not find file (404)... what damn file am i missing? i downloaded the setup from their website
You could use an hdmi splitter to hand off the image to your tv and a raspberry pi simultaneously, and then have one of these light kits plugged into the raspberry pi. Should be some tutorials on youtube for this method, search TV raspberry pi ambilight.
Hello, I tried this but it is not lighting any, but when i close my pc i tried to remove the led strips in the data and let it go with the power adapter alone and the 1st led glow green, just one led only. And tried it again but nothing happened it turned off too. Please help I don’t know what to do. TIA
Please, I need a macOS tutorial! I can't make it work at all! I already have it on Windows and Android, but on mac the LEDs just do not light up! I'm desperate, please help me!
@@13michal9 Not realy, but I needed to solder the LED Strips a little to Connect them. And I got the Code for the Ardoino in the Internet. The Programm for the Control I also got in the Internet (I dont Know what the Name of the Programm is)
You can get the full kit at this link: www.aliexpress.com/item/32958640866.html No solder, no setting, get the items and connect, you will get the ambilight on your TV.
BS TBH... wondering how can a controller mark all the LEDs on the strip, can imagine how wide would strip be for let's say 256 LEDs, and the guy on video just cuts it randomly. Ye, ye, I know, he is putting some numbers in, but this is pure BS...
Hi I have watched this video but still i cant figure out how to make my led start at top left corner, it is like no matter what i do i cant get it to count from 5 led down from top left corner and then clockwise I have set my zone/led count to 175 as i should have, but my max offset keeps me from having my starting point where i want to have it??
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Amazing. I knew some chinese manufacturer would someday make a good and cheap ambilight/dreamscreen/lightberry alternative.
Will definitely buy this in the future.
Ur link to ally Express do not work anymore... Pls share a new link or the name of the kit, thanks ❤
Does it work with TV ?
Is this working with a 1080p 144 Hz monitor?
How do i set this up on a tv
B
What is the name of this product?
Hi, thanks for this video. After watching, I decided to implement these LEDs to my dual-screen setup. Have u tried something like that before?
Show pic
did it work for you? wanna try it on dual screen as well
Any News >;
Multi-Monitor Ambilight with Prismatik: ruclips.net/video/CsO0zXmp10A/видео.html
@@unalfaruk no guide video tho :/
So do you need it to stay hooked up to a computer after you set it up?🤔
We ordered it based on you didn't need to connect to a computer but we can't get it to work and no one is responding.
@@sabrinasanchez5802 Yeah cause all the advertising i seen, it appeared to be used on a TV! If thats the case then that sucks, cause I dont have a computer!
How ro connect with tv
Hello ,how many meters i need,for 32 , inches monitor,?
What website do I download to install it
Hye,can you connect this to android box?
very satisfied from the product but the lights go to sleep after 5 minutes of nothing happening, I don't want that, could not find any settings for it, what can I do
Hi, is there a specific place where I should put the start of the strip?
You can change in settings
This set-up is for monitor of a computer, how about TV alone?
If it is an Android TV, you can try the software "Ambient light Application for Android". But it has certain limitations.
will this work on a ps4 on tv or only pc?
It works in 4k hdr.
hi, there! Does it also work with 2 monitors?
ok
ok
ok
The internet is so helpful I find this very beautiful :)
LOL
software for mac where to download?
New to pc, does this pull off the graphics card at all?
Nah it shouldn’t mate, if you’re talking about impacting your gpu performance.
Does this work for acer monitor
Wait, so you don't need to buy an arduino?
how do i connect to another piece of the led strip with the same controller? is it compatible with alexa?
I would like to use this product with PC, but i use my LG TV to "monitor" with an HDMI cabel. Will its work or its work with VGA cabel?
Yes, it work. Tv as monitor with HDMI.
can anyone help? my pc doesn't recognize the usb of the controller of the kit, is says here in the video install driver, but i couldn't find one.
90° corner connectors would be nice....
I got this one. But not working. Program has some problems. New laptop windows 10. But don't wanna install. Lights works if I connect with my android. But after few minutes lights don't wanna work.
can I install it on windows 7 pc?
Yes
Does it work with Netflix, RUclips, desktop & gaming?
from what i've read, drm protected content like netflix doesnt work. there might be a paid app that would allow netflix to work but i have not looked in to that yet.
Does it work on TV's? Like an LG (smart tv, but not android)
No it does not unfortunatelly.
This litterly is an arduino Uno, WS2812B led strip & a 5v 9-12A powersupply.
I've built a similar thing with an arduino nano, for about the same cost (40 bucks) :)
for a TV you'd need a raspberry Pi, an HDMI splitter and some more stuff (Great Scott has an older vid on that)
@@wollensokje1112 what are u talking?! Its working with nearly all tv's just connect it with Hdmi on ur Pc and ur good to go!
@@DE-signYourLife im talking about a standalone tv, not connected to a pc.
@@wollensokje1112 but his question is not "Is it working on a standalone tv" his question is just:"is it working on non smart Tv's" thats all
Will this work on tv?
I think no,you need something with video grabber hyperion-project.org/threads/raspberry-pi-3-mediacenter-hyperion-ambilight-no-soldering.77/
Can you upload Prismatik tutorial?
A Prismatik tutorial for macOS is essential and urgent!
so I got this but the lights are responding slowly to whats on screen and gives flickering effect. Can you tell me what arduino board you use on this? I can try and compile fast led code on this to see if it works any better.
i have a android tv, do i still need a pc? Amd doese netflix work woth this?
Help please. Probably i cannot see what com am I using. But when I check on device manager it says port is CoM 1. But the light is not turning on. Please help.
If you set up the controller with the computer can you put the usb in to your monitor and will it still play the same as the movie
Fahiem Amirkhan no. The Controller have to be all the Time connected to the pc. Because the pc controlls the led, not the Controller.
My monitor dont have usb hub? So what must i do? Can i plug in on my pc usb?
Actually you need to plug it in your PC
How I can use it with Sony Smart Tv android?
That's what i would like to know
Same here.
this is only on the pc,you need something other with video grabber like hyperion ambilight
does it work with 2 monitors?
nope
I have 2 monitors side by side with an extended desktop (3840x1080). Is the box able to control ambilight for both monitors or do I need one box for each monitor?
I tried it today, seems like using the AmbiBox you can only capture from 1 monitor. Also the config for two monitors is a mess :/ Currently using this as a bias light
For all you TV people... use GoVee h104...have camera as input...
Hi
I have watched this video but still i cant figure out how to make
my led start at top left corner, it is like no matter what i do i cant
get it to count from 5 led down from top left corner and then clockwise
I
have set my zone/led count to 175 as i should have, but my max offset
keeps me from having my starting point where i want to have it??
Why did you start from the top??? You didn't read instructions did you...
@@SolarizeYourLife Properly not, so i have now re attached the led correctly, so bingo to you!!
So cool
Can I implement this kit on my second screen instead of my laptop screen? Does anyone know that?
when i try to install ambibox setup, i get error saying. could not find file (404)...
what damn file am i missing? i downloaded the setup from their website
Hey, I had the same problem. did you make sure to uncheck "playclaw" when installing? Thats what it was for me.
ChrisCDXX Yeah no i installed that one.. too bad i already threw them away😅
just click on next few times and it will work
does it requieres the software to run or once the setup is done I can use it on any TV?
only Computer
You could use an hdmi splitter to hand off the image to your tv and a raspberry pi simultaneously, and then have one of these light kits plugged into the raspberry pi. Should be some tutorials on youtube for this method, search TV raspberry pi ambilight.
How do I use this for Multi HDMI?
Graciouz i was wonderng the same thing. and if it could just be part of all the tv/monitors inputs, not only the pc.
Hello, I tried this but it is not lighting any, but when i close my pc i tried to remove the led strips in the data and let it go with the power adapter alone and the 1st led glow green, just one led only. And tried it again but nothing happened it turned off too. Please help I don’t know what to do. TIA
Don't expect much from it, it's fun, but it's syncing is too slow, there is no white, so most colors are off en it just turns itself off randomly
..than you dont set it the right way like i does! It works perfect
👍👍👍👍👍👍👍👍👍👍👍👍
Can you upload the arduino code? We need timeout=0 so the mood lamp doesnt turn off after 15 seconds
Please, I need a macOS tutorial! I can't make it work at all! I already have it on Windows and Android, but on mac the LEDs just do not light up! I'm desperate, please help me!
Vítor Teodoro lmao mac people
MAC? What is MAC? Is here someone that know what is MAC? Use something working, not MAC. :-)
now i just wait for all my information get downloaded to a server in china
too late
yeah, cause your information is so valuable. lol.
2:27 WTF so many huge things... You dont need them! Just use a Ardoino Nano...
Is it cheaper tho?
@@13michal9 Yes it is
@@13michal9 I Just used a Ardoino Nano and LED Strips.
@@erikstrauch8306 Did you follow any particular tutorial? I don't think I am knowledgeable enough to do it 100% on my own.
@@13michal9 Not realy, but I needed to solder the LED Strips a little to Connect them. And I got the Code for the Ardoino in the Internet. The Programm for the Control I also got in the Internet (I dont Know what the Name of the Programm is)
Qualcuno che sa spiegarmi come farlo funzionare???mi dice sempre dispositivo non trovato
I need video ambilight for to Raspberry pi3 openelec, libreelec, by hyperion configuración
ruclips.net/video/r1Cbg8LLzEs/видео.html
alguien ha logrado instalar en linux mint 19.1
You can get the full kit at this link: www.aliexpress.com/item/32958640866.html
No solder, no setting, get the items and connect, you will get the ambilight on your TV.
www.aliexpress.com/item/32958640866.html
The instructions are so small on your screen that you can't follow them.
BS TBH... wondering how can a controller mark all the LEDs on the strip, can imagine how wide would strip be for let's say 256 LEDs, and the guy on video just cuts it randomly. Ye, ye, I know, he is putting some numbers in, but this is pure BS...
..in the Thumpnail: Green doesnt match with your Tv Image.
How to get an epilepsy seizure
Too bad I can't read Chinese
Hi
I have watched this video but still i cant figure out how to make
my led start at top left corner, it is like no matter what i do i cant
get it to count from 5 led down from top left corner and then clockwise
I
have set my zone/led count to 175 as i should have, but my max offset
keeps me from having my starting point where i want to have it??