Когда-то делал такую же калибровку своей приборной панели на В6. Единственное замечание - все-таки лучше стрелки разбирать и ставить в перчатках так как на шкалах легко остаются отпечатки пальцев которые иногда не легко удалить. Спасибо за видео, проностальгировал)
Same thing needs to be done for my Ford Fiesta. Purchased a second hand cluster from eBay however I've noticed dislocation of pointers which might have dislocated in transit. Plz help how to re-calibrate to its original position. 😢
Thank you so much for this video. I want to know if possible to do the same calibration while the cluster is plugged into the car instead of the obd2 you made. Pulling out the cover and plugging back the cluster into the car without cover and calibrating it . I have vcds . Sorry for long comment and thanks.
Pozdrav, možete li mi pomoći, naime imam Seat Ibiza 2001 i kazaljka od goriva mi stoji skroz desno pa me zanima može li se to popraviti preko vcds programa
Hi ,my polo 6 gti was setup like that too ,but my fuel gauge needle jus stopped working it's not even showing fuel range,I checked the fuel pump it's good,fuel pump module is good,wiring fuse all good,please tell me what could be the problem
@@ultrawebteam I dont have vcds ,but I tried opening the cluster and manual pushed the needle clockwise ,after that I did that i turned on the ignition (nothing happened) but wen I pulled out the key from ignition the needle moved back to empty
Hello, if I wanted to change my instrument cluster in my Volkswagen Passat B6 (red color) to the facelift Volkswagen CC cluster (white color) will this be necessary or is it just plug and play?
I've got an issue, my RPM needle sits at 3 when the car is off. When car starts needle moves as normal from 3, so 3.5k etc when idle and 4-5k when driving etc. When engine is switched off it sits back at 3. Would taking off needle manually and putting it back fix this? ty sir :) (VW SCIROCCO)
Hi , WoW very beautiful I could very well see the same counter in my Passat B6 Variant 2.0 TDI DSG! Do you have any in stock? if so, how much does it cost please ?
@@ultrawebteam Oooooh I see. Any chance of a future video on how to make a obd2, gateway, power and cluster plug? Again thank you and keep uploading awesome videos.
I'm also interested in making this custom OBD2-cluster cable. I would appreciate if you can send me some schematics or even better make a video of how to build it. Excellent tutorial by the way. Keep up buddy, you got yourself a new subscriber. :) Pozdrav brate imenjace. :)
Hello, Before watching this video I turned the needle a little bit towards the other side “clockwise” it seems to be working fine, but do you think it can cause a problem and damage the engine? Thank for the video!
Hey, thanks a lot for the video. I just wanna know, did you make the test bench cable yourself or you bought it? I need to get one for VW mp9 mk1 cluster, i cant find any online. Where can i get the cluster pinouts Thanks...
Когда-то делал такую же калибровку своей приборной панели на В6. Единственное замечание - все-таки лучше стрелки разбирать и ставить в перчатках так как на шкалах легко остаются отпечатки пальцев которые иногда не легко удалить. Спасибо за видео, проностальгировал)
Thank you man. Thumbs up for this!
It worked for me, but maybe you could add how to connect the Dashboard to the VCDS
Great video. Loved the music too, thanks for sharing :D
Same thing needs to be done for my Ford Fiesta. Purchased a second hand cluster from eBay however I've noticed dislocation of pointers which might have dislocated in transit. Plz help how to re-calibrate to its original position. 😢
I dont know about Ford noting.
Thank you.for your video.but why in the end it's not moving like needles sweep after you content the cable?!
On this video i just show how to Calibration needle, this cluster dont have needles sweep active.
how do you do it on a a3 8l / mk4 golf? VCDS lite doesn't have the Selective output test function...
Hello, how to edit eeprom to obtain oil temperature, staging, I already have the guide, best regards
For staging have on my youtube chanel needel swap About oil not all support.
Hi my rev gauge shows +1k reality sometimes +2k Even +3 Any ideeas why
Thank you so much for this video.
I want to know if possible to do the same calibration while the cluster is plugged into the car instead of the obd2 you made. Pulling out the cover and plugging back the cluster into the car without cover and calibrating it .
I have vcds .
Sorry for long comment and thanks.
Yes its posible
GOOD EVENING, DO YOU HAVE THE PINOUTS OF THE GOLF MK7 CLUSTER
No i dont.
hi
my ECT (Temp gauge) needle does NOT MOVE at all when i do the output test. what can i do to fix this?
You can try change Needle motor
Pozdrav, možete li mi pomoći, naime imam Seat Ibiza 2001 i kazaljka od goriva mi stoji skroz desno pa me zanima može li se to popraviti preko vcds programa
Da li je pala ili ne pokazuje lepo ?
Kad je ugašen auto tad je skroz dolje, a kad je upaljen auto tad je skroz gore ( desno) iako ima manje od pola rezervara goriva
I know this is a diesel cluster can you put it in a petrol?
Yes i can.
Hi ,my polo 6 gti was setup like that too ,but my fuel gauge needle jus stopped working it's not even showing fuel range,I checked the fuel pump it's good,fuel pump module is good,wiring fuse all good,please tell me what could be the problem
Whit vcds can you see fuel level?
@@ultrawebteam I dont have vcds ,but I tried opening the cluster and manual pushed the needle clockwise ,after that I did that i turned on the ignition (nothing happened) but wen I pulled out the key from ignition the needle moved back to empty
Hello, if I wanted to change my instrument cluster in my Volkswagen Passat B6 (red color) to the facelift Volkswagen CC cluster (white color) will this be necessary or is it just plug and play?
Plug and play have Video on my Chanal.
I've got an issue, my RPM needle sits at 3 when the car is off. When car starts needle moves as normal from 3, so 3.5k etc when idle and 4-5k when driving etc. When engine is switched off it sits back at 3. Would taking off needle manually and putting it back fix this? ty sir :) (VW SCIROCCO)
Must be try.
Hi , WoW very beautiful I could very well see the same counter in my Passat B6 Variant 2.0 TDI DSG! Do you have any in stock? if so, how much does it cost please ?
Txt me on instagram @stefan.babic
Stefane da slucajno ne znas gdje bih mogao uzet taj 3D bord
Javi se meni na instagram imam ih za prodaju. @stefan.babic
Awesome, quick question though: How do you connect the VCDS to the cluster???? Thank you for the awesome vid
Via OBD2 i have make obd2, gateway, Power and cluster plug.
@@ultrawebteam Oooooh I see. Any chance of a future video on how to make a obd2, gateway, power and cluster plug? Again thank you and keep uploading awesome videos.
I'm also interested in making this custom OBD2-cluster cable. I would appreciate if you can send me some schematics or even better make a video of how to build it.
Excellent tutorial by the way. Keep up buddy, you got yourself a new subscriber. :) Pozdrav brate imenjace. :)
Hello,
Before watching this video I turned the needle a little bit towards the other side “clockwise” it seems to be working fine, but do you think it can cause a problem and damage the engine?
Thank for the video!
Its be good just make one free spin for motor come in start Position.
@@ultrawebteam Hello, i moved needle clockwise and counterclock, and now my motor makes weird noise when turning? help?
@@Rasmus230100 try put wd40 inside.If not help you need replace step motor.
@@ultrawebteamwhere to put exactly
Very helpful content. Just wanted to know-do I need to take out all 4 needles when I only have issue with the fuel gauge?
If you need just fuel gauge calibration,take just fuel.
Thanks a lot
@@ultrawebteam hi. Where to get the cable/harness from?Link? Please
@@mohammadsiddiq6157 text me on instagram @stefan.babic
Does this also work for Golf MK6?
Yes
Hey, thanks a lot for the video.
I just wanna know, did you make the test bench cable yourself or you bought it? I need to get one for VW mp9 mk1 cluster, i cant find any online. Where can i get the cluster pinouts
Thanks...
I make my self
Can you kindly assist me with getting the pinouts diagram of VW golf mk1 mp9 cluster. Even if its just a link, I'll truly appreciate it
Pozz koja je godina passat?
Moj passat je 2012,ovaj sat je iz 2014 moze u bilo kog passat od 2005 do 2015
Ceasul de temperatura a apei e incapatanat, scos, calibrat, fixat montat pe masina, apa sta la 92 🤦🏼♂️
?