Amazing idea. Only thing I don't like that you still need a network router. Why can't the Hue bridge and Denon Prime unit connect directly, without that router? Would be much more convenient for small outdoor or wedding parties.
Me Too. That's why my Lights are in Storage Now. I can tell you what I did find out. I use a Bridgepoint WiFi Router that I connect to my Hues Bridge. The Good Thing I found out is that I didn't have to plug up one of my cell Hotspot for internet access as it worked without it.
This is not an issue from the Controller, instead it's because the philips hue bridge needs a WiFi Router in the Middle. But u could make this more mobile, if you would install a lil mobile router in your travel case for bringing your own wifi network with you to your gigs
@@SomeOne-bj6cl @RoDi Baker That's partially the reason. The real reason is because both devices expect to reside within the same Level 3 subnet, one way or the other. How does a router (normally) achieves that for all the devices? by **assigning** IPs with the same subnet mask to each one of them. So, you don't have a router. How can you bypass this step and still accomplish that level 3 connection? easy: don't leave that task to another device. Instead, set a static IP with the same subnet, both on the Denon Prime 4 ethernet card, and, by preconfiguring the Hue Hub (there are several tutorials for this). Is it worth it? IMO, no. There are like 20 bucks routers that are the size of a credit card.
Hi, i have Govee Lights and i would really appreciate to manage them with my engine consolle. Are you maybe planning to integrate Govee Lights into Engine? Thank you!!
On my sc6000m's im only able to connect one player at a time. So if i want to mix and have the lights synced i can only use layer mode intead of 2 separate decks.
@@KnightmareOX Is that true? I understood that the Prime unit directly connects with the Hue Bridge. Why you need an extra router then? It would kill the entire purpose of using this mobile
@@m-stat9 hue bridge must connect to wi fi router at your house using LAN cable, and then it can connect to the lights at your house. the connection made between prime unit and hue bridge is because both connected to the same network (hue directly to router, and prime unit using wi-fi)
Hey Tek - The Phillips Hue (Basic) allows you to control the Phillips Hue lights from your hardware using Engine Lighting. In regards to changing pad colors of the lights, this might be a unique option to consider. Feel free to share it in the feature requests section of the Denon DJ Forum. www.denondjforum.com
its not working, i did excacly what you told on the video. {sc5000} i got connected with the Hue bridge, i can see the lights in the screen of my SC 5000. but no reaction.
Hey Peter - Happy to help! Feel free to share what you're experiencing with our support team and a technical agent will be able to help: www.denondj.com/support
@@EngineDJOfficial I got my lights working with the first version by deleting my other entertainment zones. I’m looking forward to the new version this weekend and will try with multiple zones on my Hue system. This is very, very cool. I’m so glad you implemented this!!!!!
The whole release is the biggest bug fest ever for me. First off, when trying to log in to my Denon DJ account I get a message, that my account has been temporarily deactivated. Had to get myself a new account first to download the 2.0 firmware. Downloaded the USB version and after updating my SC5000 (which was at 1.6.2.) it was at... well... it was still at 1.6.2. No matter what I tried, no matter if using the web option or the USB option. Okay then... Let's try it via Mac and the .dmg Hmmm this seems to work now, although in the preferences it still suggests that there is a firmware update available. But clearly it is 2.0 now. The device info tells me so and also the new menus make it clear. So i really wanna try linking with my hue lights. I add my bridge, it states "bridge connected" and I can even see all my entertainment zones and contained lights. But when tapping on any of the lights non of them flash or indicate any connection with my player. In the upper right corner it always says "connecting"... Hmm what now? Maybe try to do the suggested firmware update from the players menu anyways? After doing so I am back at 1.6.2 lol Maybe there is some truth to the saying "never play on patch day" Looking forward to getting some infos from you dear Denon DJ team! And also please tell me what happened to my account?!
Hi Janis, I see that you have joined the thread on the forum discussing this topic. I'll add the link here in case others are having the same issue. denondjforum.com/t/philips-hue-lighting-bridge-is-connected-but-lights-arent-changing-or-responding/35468/8
@@EngineDJOfficial as the thread shows, there a at least a few people having the same problem with the lights not reacting/connecting. Any trouble shooting suggestions from your side?
Hey! We've made some bug fixes with our recent release of Engine DJ 2.0.2 today. Feel free to upgrade and see if this resolves your issues: enginedj.com/downloads#release-notes
"Free service"? Features should be free. This is the least you could do after calling this machine standalone is Hue lighting. Subscriptions are not standalone. Besides it still requires a Hue bridge, Hue lights and cell phone. It's definitely not free or standalone. The WiFi on the Prime could probably do the same as the bridge with a little more programming.That's what the Hue app is. How about you focus on making Engine OS 2.0 & above be able to move file folders from the external drives to the internal drive and do its own batch analysis first. You know. Standalone. Without a computer. As promised & as advertised. Then add more crap. Also if you add a feature to a "standalone" unit, you must add the software internally to run it. Or it is not standalone. 🤣🤣
Thanks for your feedback! Definitely feel free to share this with our community on the Engine DJ forum. Our team is always open to it! www.denondjforum.com
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
So pumped you released this. I have a Prime Fo and just bought a bunch of Hue lights just because of this feature.
Guys before you purchase you need a Phillips Hue Bridge to make them connect which is sold separately to the light bars.
Still REALLY needs to be fucking said
Amazing idea. Only thing I don't like that you still need a network router. Why can't the Hue bridge and Denon Prime unit connect directly, without that router? Would be much more convenient for small outdoor or wedding parties.
exactly what I was thinking as well
Me Too. That's why my Lights are in Storage Now. I can tell you what I did find out. I use a Bridgepoint WiFi Router that I connect to my Hues Bridge. The Good Thing I found out is that I didn't have to plug up one of my cell Hotspot for internet access as it worked without it.
This is not an issue from the Controller, instead it's because the philips hue bridge needs a WiFi Router in the Middle.
But u could make this more mobile, if you would install a lil mobile router in your travel case for bringing your own wifi network with you to your gigs
@@SomeOne-bj6cl @RoDi Baker That's partially the reason. The real reason is because both devices expect to reside within the same Level 3 subnet, one way or the other. How does a router (normally) achieves that for all the devices? by **assigning** IPs with the same subnet mask to each one of them. So, you don't have a router. How can you bypass this step and still accomplish that level 3 connection? easy: don't leave that task to another device. Instead, set a static IP with the same subnet, both on the Denon Prime 4 ethernet card, and, by preconfiguring the Hue Hub (there are several tutorials for this). Is it worth it? IMO, no. There are like 20 bucks routers that are the size of a credit card.
This is so awesome! Will try this at my next home party for sure
so klasse mit philips hue - funktioniert perfekt - thanks a lot to Denon !!!
Hi, i have Govee Lights and i would really appreciate to manage them with my engine consolle. Are you maybe planning to integrate Govee Lights into Engine? Thank you!!
Thanks for that mate. Answered my question
I have this, but where can I edit the autoloops within engine dj so I can customise the hue light show?
Oh yes I like this kind of gadjet 😁
So it only works if there is wifi right ? Or is wifi needed only to set it up ?
Thanks for uploading! Awesome update!
On my sc6000m's im only able to connect one player at a time. So if i want to mix and have the lights synced i can only use layer mode intead of 2 separate decks.
If I'm doing a live set at a club does the hue bridge need to be connected to a router or can I use a hotspot to connect to the hue lights?
Hue lights need a hub on wifi
@@KnightmareOX Is that true? I understood that the Prime unit directly connects with the Hue Bridge. Why you need an extra router then? It would kill the entire purpose of using this mobile
@@m-stat9 hue bridge must connect to wi fi router at your house using LAN cable, and then it can connect to the lights at your house. the connection made between prime unit and hue bridge is because both connected to the same network (hue directly to router, and prime unit using wi-fi)
Hi, question, If philips is connected via wifi. Can I still be downloading music from network music sources?
Thank you
What if you don’t have the hue bridge just the lights?
When I click lighting it just loads don't get to the basic or pro part been like this since I bought lights and also through about 4 new prime updates
Is this posible with pioneer xdj rx3 ?
Do you need the bridge? I’ve got hue gu10s in my kitchen but no bridge
Yes you will need the bridge.
What does the Hue option do? And why not use the pads to change the color of the lights :)
Hey Tek - The Phillips Hue (Basic) allows you to control the Phillips Hue lights from your hardware using Engine Lighting. In regards to changing pad colors of the lights, this might be a unique option to consider. Feel free to share it in the feature requests section of the Denon DJ Forum. www.denondjforum.com
If anyone has a video with live set. We can't really see how it work here
Hi! I only have one Go portable. Do I need the Hue bridge?
Sure! You need a Hue bridge
@@reisdevistomasatti4485 Thanks for the answer! Need to buy one then. :) I use the Prime Go.
If you double tap the view button it will open engine lighting
Will this work with streaming services as well?
Hey Richie - Yes it will.
its not working, i did excacly what you told on the video. {sc5000}
i got connected with the Hue bridge, i can see the lights in the screen of my SC 5000.
but no reaction.
Hey Peter - Happy to help! Feel free to share what you're experiencing with our support team and a technical agent will be able to help: www.denondj.com/support
So, my Go sees my Hue Bridge and lights but I’m not able to control any lights for some reason. Any ideas?
Hi Zachary, have you tried the latest update v2.0.1 to see if you still have the same issue?
@@EngineDJOfficial I got my lights working with the first version by deleting my other entertainment zones. I’m looking forward to the new version this weekend and will try with multiple zones on my Hue system. This is very, very cool. I’m so glad you implemented this!!!!!
What is the Ethernet from the Bridge plugged into? I can't see.
What type of Dmx style of lighting?
Any as long as you're using a SoundSwitch USB to DMX interface.
Great video. Easy to understand. Just unfortunate the speaker couldn't pronounce the word "button". Very distracting.
I have done everything and norhing works on my sc5000
Hi Colin, sorry to hear of the difficulty. What mixer are you using?
@@EngineDJOfficial X1800
@@EngineDJOfficial denon X1800
The whole release is the biggest bug fest ever for me. First off, when trying to log in to my Denon DJ account I get a message, that my account has been temporarily deactivated. Had to get myself a new account first to download the 2.0 firmware. Downloaded the USB version and after updating my SC5000 (which was at 1.6.2.) it was at... well... it was still at 1.6.2. No matter what I tried, no matter if using the web option or the USB option. Okay then... Let's try it via Mac and the .dmg
Hmmm this seems to work now, although in the preferences it still suggests that there is a firmware update available. But clearly it is 2.0 now. The device info tells me so and also the new menus make it clear. So i really wanna try linking with my hue lights. I add my bridge, it states "bridge connected" and I can even see all my entertainment zones and contained lights. But when tapping on any of the lights non of them flash or indicate any connection with my player. In the upper right corner it always says "connecting"... Hmm what now? Maybe try to do the suggested firmware update from the players menu anyways? After doing so I am back at 1.6.2 lol
Maybe there is some truth to the saying "never play on patch day"
Looking forward to getting some infos from you dear Denon DJ team! And also please tell me what happened to my account?!
Hi Janis, I see that you have joined the thread on the forum discussing this topic. I'll add the link here in case others are having the same issue. denondjforum.com/t/philips-hue-lighting-bridge-is-connected-but-lights-arent-changing-or-responding/35468/8
@@EngineDJOfficial as the thread shows, there a at least a few people having the same problem with the lights not reacting/connecting. Any trouble shooting suggestions from your side?
Just have some patience, usually x.0.0 software is always a bit bugged at the start, just wait for 2.0.1, they are working on it!
Hey! We've made some bug fixes with our recent release of Engine DJ 2.0.2 today. Feel free to upgrade and see if this resolves your issues:
enginedj.com/downloads#release-notes
Cheese
"Free service"? Features should be free. This is the least you could do after calling this machine standalone is Hue lighting. Subscriptions are not standalone. Besides it still requires a Hue bridge, Hue lights and cell phone. It's definitely not free or standalone. The WiFi on the Prime could probably do the same as the bridge with a little more programming.That's what the Hue app is.
How about you focus on making Engine OS 2.0 & above be able to move file folders from the external drives to the internal drive and do its own batch analysis first. You know. Standalone. Without a computer. As promised & as advertised. Then add more crap. Also if you add a feature to a "standalone" unit, you must add the software internally to run it. Or it is not standalone. 🤣🤣
Thanks for your feedback! Definitely feel free to share this with our community on the Engine DJ forum. Our team is always open to it! www.denondjforum.com