is it possible to use HDMI with soundswitch as well so that you can get visuals playing in sync with the music on a TV for example? If not maybe add that in the future?
I’m interested in purchasing sound switch. But I would like to know how is the computer connected to the lights? Is there a USB to DMX cable or does the computer send a DMX signal wirelessly? Do I need to buy any wireless dongles for transmitting a signal?
I can’t even figure out how to get my editing more stuff to activate in performance mode. I just run the pre-loaded editing programs during a performance.
I'm struggling with getting the autoloops to work, I am working with Serato DJ and I can't get the prism on my moving heads to activate, nor get the lights to move in time with the music even though Serato is connected
Hello soundswitch how can I get a hold of you guys? I’m having some trouble with connecting my serato with soundswitch. I have done all the steps to connect with serato. I would do a lightshow in edit mode and when is time for performance mode it doesn’t perform my lightshow. HELP!
Ok, so i have my light in DMX Adress 1 and it says the same thing on the light, it is in 8 channel mode, also says that on the light. I plugged it in the way the manual told me.. Right.. But my light doesn't come on? I am using the Control One
Question, Ive been trying to get my BrotherLights to work with SoundSwith. Ive added them and keep trying to get them to work but no luck. Im not sure what I've missed from all the tutorials I've seen. Once i add it to the DMX on SoundSwitch i go to MINI to see if i can test them. but no do. Ive also have my lights hardwired directly to the lights with DMX A001, any help would be greatly appreciated
You cant have all lights on same channel. The program cant desifer what light is what when on same channel. So ex my one spot duo is on channel 1 sec spot duo is channel 21 my starburst is channel 61. It goes same for using a dmx board.
Hey and thanks for your tutorials. 1. In Edit Mode, autoloop section in the bottom of the screen, only in see 4 autoloops per bank. If i delete once, there are 4 again... only when i deleted 5 autoloops, i see the last 3. Means... there are 8 autoloops per bank but i can only see 4 of them. Scrolling not possible and change screen resolution is not successful to change behavior. What's up with it..... what's the trick? 2. If i choose an autoloop and will repeat them, ever i must go to the menu in the control one to enable / disable this feature. Is there a better way to to this? AND......... if i activate repeat autoloop, i can't select another autoloop in a short way about the control one... Why / is there a trick too? Yes, in the control one menu..... but the control one has 8 buttons per bank. Why can't select an specific autoloop while activate repeat autoloop??? Just i need quick help because i don't know, sound switch and control one is a good solution. In the moment i can't see a benefit. The configuration is such a terrible thing like other DMX software... The last one... Chauvet Gigbar Move + ILS is not supported in a good way. In every video tutorial, the example fixture is the Chauvet Gigbar Move and so i thought, the integration is perfect without a lot of configuration. But..... 🤷♂ Do you have some Tipps about the questions and problems above???
My SS with windows 11 and 1000 srt work only in one channel, Fader (chanell one) i have to use link button when im in preformance mode and Play something from channel two or 3 o 4 becouse my light go to the something like blank mode no light's till im not press link button but if i want play from channel one evryting work like should be. Why?
Awesome video and awesome product! @SoundSwitch I wanted to know how's the compatibility with Traktor Pro 3 before I buy the Micro USB - DMX interface. Cheers!
So when I am in the "performance settings" I am only restricted to having "upfader only" mode, but I want blend mode. It will not let me select it. Why would that be?
I’m having the same issue. I connected my gigbar 2 and lots of features are malfunctioning. My derbys never move. If I move slide the DMX channel up a little different things start to happen (like moving derbys)
@@itsdjtam I figured it out. You have to create and individually place attribute cues down on your autoloops. I made a few to cue the derbies to rotate right, left, on/off, laser, etc.
Same, I have been trying to contact soundswitch because is not connecting with my serato. I would do a lightshow (not with my gigbar) and when I will dj the lightshow I have created would not come out with the song. Soundswitch customer service really sucks
I have this fun cool thing where after autoscripting I have no idea what to do. I hit play. nothing happens. I go to perform. nothing happens. are there better tutorials where you explain the transition of step to step? instead of lets see how it looks and here we are and I don't know how we got there.
Полезное видео. Многое узнал. Вам нужно добавить функцию, которая будет автоматически определять стиль для света (autoscripting), например по тональности трека
When I save changes to autoscript. When I turn the computer on after a couple of days I have to go back and double click on all the songs again. I thought they were locked in no matter what. Please help
@@beastmaster1357 У меня было нечто подобное. Несмотря на это, автосценарии были сохранены, хотя в программе их не было. Аппараты все равно работали. Я не знаю, как вам помочь
is it possible to use HDMI with soundswitch as well so that you can get visuals playing in sync with the music on a TV for example? If not maybe add that in the future?
I’m interested in purchasing sound switch. But I would like to know how is the computer connected to the lights? Is there a USB to DMX cable or does the computer send a DMX signal wirelessly? Do I need to buy any wireless dongles for transmitting a signal?
I can’t even figure out how to get my editing more stuff to activate in performance mode. I just run the pre-loaded editing programs during a performance.
how do you just select USb as an option. I dont have serato or virtual dj or any of that? i get nothing coming through my channels or anything
I'm struggling with getting the autoloops to work, I am working with Serato DJ and I can't get the prism on my moving heads to activate, nor get the lights to move in time with the music even though Serato is connected
I have some led spot moving heads but I don't know the MAF. How do I find it in the list
What setting does each light have to be on?
so what if you can find the brand can you still get to set up the lights
Hello soundswitch how can I get a hold of you guys? I’m having some trouble with connecting my serato with soundswitch. I have done all the steps to connect with serato. I would do a lightshow in edit mode and when is time for performance mode it doesn’t perform my lightshow. HELP!
What would I set the light fixture to for my “Boryli Beam 230” lights? They move, but I’m getting no light.
i could not find my mover manufactures etc in software library, what is best to do so?
Im trying to set my lights up i only have 2 moving heads betopper lm70s i can find them but how can i set a auto with out my music being scaned
Does this use the Crescit fixture library? Also if you're fixture is not in the fixture list what is the process to submit it? Cheers
Ok, so i have my light in DMX Adress 1 and it says the same thing on the light, it is in 8 channel mode, also says that on the light. I plugged it in the way the manual told me.. Right.. But my light doesn't come on? I am using the Control One
Fixture Library for Rockville wedges products and ADJ wash hex FX?
Thanks Matt - this was great!
Which link is for VDJ setup?
Thanks for this video! Can you batch auto script a bunch of songs at once?
Yes, right-click on the playlist or crate and select "AutoScript"
Question, Ive been trying to get my BrotherLights to work with SoundSwith. Ive added them and keep trying to get them to work but no luck. Im not sure what I've missed from all the tutorials I've seen. Once i add it to the DMX on SoundSwitch i go to MINI to see if i can test them. but no do. Ive also have my lights hardwired directly to the lights with DMX A001, any help would be greatly appreciated
You cant have all lights on same channel. The program cant desifer what light is what when on same channel. So ex my one spot duo is on channel 1 sec spot duo is channel 21 my starburst is channel 61. It goes same for using a dmx board.
Hey and thanks for your tutorials.
1. In Edit Mode, autoloop section in the bottom of the screen, only in see 4 autoloops per bank. If i delete once, there are 4 again... only when i deleted 5 autoloops, i see the last 3. Means... there are 8 autoloops per bank but i can only see 4 of them. Scrolling not possible and change screen resolution is not successful to change behavior.
What's up with it..... what's the trick?
2. If i choose an autoloop and will repeat them, ever i must go to the menu in the control one to enable / disable this feature.
Is there a better way to to this? AND......... if i activate repeat autoloop, i can't select another autoloop in a short way about the control one... Why / is there a trick too?
Yes, in the control one menu..... but the control one has 8 buttons per bank. Why can't select an specific autoloop while activate repeat autoloop???
Just i need quick help because i don't know, sound switch and control one is a good solution.
In the moment i can't see a benefit. The configuration is such a terrible thing like other DMX software...
The last one...
Chauvet Gigbar Move + ILS is not supported in a good way.
In every video tutorial, the example fixture is the Chauvet Gigbar Move and so i thought, the integration is perfect without a lot of configuration. But..... 🤷♂
Do you have some Tipps about the questions and problems above???
👍👍👍👍
Can anyone tell me how to import my serato library into SSwitch? Like how is it done and how do I get beatgrids on my loaded tracks for autoscripting?
My SS with windows 11 and 1000 srt work only in one channel, Fader (chanell one) i have to use link button when im in preformance mode and Play something from channel two or 3 o 4 becouse my light go to the something like blank mode no light's till im not press link button but if i want play from channel one evryting work like should be. Why?
SS will not recognize my light and it is listed ,what now?
Bought my SS yesterday....cannot wait to get into this way of using my lights.... yeeehaaa!
Welcome to the team. reach out if you need any help.
@@soundswitch4427 Thank you. I do need help.... will email.
Awesome video and awesome product! @SoundSwitch I wanted to know how's the compatibility with Traktor Pro 3 before I buy the Micro USB - DMX interface. Cheers!
It’s not compatible with Traktor. /:
With the Denon SC6000 and a Soundswitch Micro usb to DMK Dongle, will i have some use of the controls without a subscription?
yes
@@soundswitch4427 Thank you
So when I am in the "performance settings" I am only restricted to having "upfader only" mode, but I want blend mode. It will not let me select it. Why would that be?
Are you using 4 deck mixing or two?
@@soundswitch4427 2
Forgot to show how to setup dmx on the back of fixture
can you also do this on a single SC6000 prime player?
yes, all Engine OS hardware is supported.
Loop strobe is great feature mentioned nowhere :) Does it work with all the DJ softwares? I am using Serato.
Yes, it works with all DJ software
Great video and software.
Can you make one for traktor
Anyone else having a problem with the software constantly crashing on MAC?? About to send this thing back
I must be doing something wrong- when I dmx my GigBar Move to SoundSwitch I lose features like the laser
I’m having the same issue. I connected my gigbar 2 and lots of features are malfunctioning. My derbys never move. If I move slide the DMX channel up a little different things start to happen (like moving derbys)
@@ericscalfano3256 Same here! I just submitted a support ticket... Any luck?
@@itsdjtam I figured it out. You have to create and individually place attribute cues down on your autoloops. I made a few to cue the derbies to rotate right, left, on/off, laser, etc.
Same, I have been trying to contact soundswitch because is not connecting with my serato. I would do a lightshow (not with my gigbar) and when I will dj the lightshow I have created would not come out with the song. Soundswitch customer service really sucks
I can’t even get it to work at all. I give up. Just stays in auto or sound.
I have this fun cool thing where after autoscripting I have no idea what to do. I hit play. nothing happens. I go to perform. nothing happens. are there better tutorials where you explain the transition of step to step? instead of lets see how it looks and here we are and I don't know how we got there.
how to use with prime 4 only
ruclips.net/video/xO118wPccoE/видео.html
Why aren't your lasers or strobes working. Mine aren't either
Did you ever figure this out?
Полезное видео. Многое узнал. Вам нужно добавить функцию, которая будет автоматически определять стиль для света (autoscripting), например по тональности трека
When I save changes to autoscript. When I turn the computer on after a couple of days I have to go back and double click on all the songs again. I thought they were locked in no matter what. Please help
@@beastmaster1357 У меня было нечто подобное. Несмотря на это, автосценарии были сохранены, хотя в программе их не было. Аппараты все равно работали. Я не знаю, как вам помочь
This guy gets on my nerves