Despite all the uncertainty in the world right now, you can be certain that if one of these guys needs a dumbbell, knob or anything else vaguely insulting, the first thing that will happen is a jump shot to the other guy 😅👍
"Overkill is my second favourite kill" Would you mind putting that on a t-shirt, I'm a structural engineer and the wife always accuses me of the overkill thing when I'm making stuff for the kids to play on...
Reminds me of an old Kubota tractor workshop manual, where items from the periodic inspection checklist included the step "remove engine from the clutch housing" :D
I love the way you've precisely defined the challenge "for the price of a reasonably high end Sim race set up". With that criteria, good man maths could easily justify anything up to and including a 911 GT3
You've forgot the easiest and cheapest mod to make your racecar faster: High compression washer. There's 15 kilo's of excessive weight in that thing, and with those power levels, all of it counts.
Just put a Tow bar on a VW T5, 30 min fitting the toe bar. 3 hours of crap to get there, 3 more to put it all back on......oh and 25 min of buggering about with the wiring!
@@Stereomoo Me, too, instantly was thinking of Mr Chapman's creative genius when it came to impossible triple use of vastly underweight parts, but it turned out that Toyotroën just put two layers of things in the way of service access like every other car hack calling themselves "engineer" these days.
@@SF-tb4kb I had a vauxhall cavalier that required stripping the entire dash from the drivers door to the centre console in order to replace the bulb in the clock.
If in doubt give it a clout. I asked my mentor 26 years ago when I was a wee apprentices mechanic what’s the first tool I should buy and he replied with a bloody big hammer hammer, he was I wise man
Shows the enthusiasm for this channel when around 50 percent of the subscriber total have seen the video in only 24 hours. Great work guys. Keep it up.
@@yousefabdulrhman858 Shop rates will very, but lets say it is 100 bucks per hour. Now most garages start the clock with an hour even if the job takes 20 minutes. If you have to do this a few times, you'd be better off buying a proper press. My press is 50 ton and I bought it used for $200. I have used it many times and will again and when I am done with it (or die), my kids can use it or sell it for a few hundred bucks.
These grassroots race series are the best thing. It takes a lot of the budget and knowledge handicaps out of racing! All these mods would be documented so ever someone with little mechanical experience can do it. Its great for youngsters starting out and healthy for the sport
@@chrisenright7003 I wasn't referring to her, though. (I actually don't have a clue who she is...) The details I was referring to are the intricate brackets that are quite often being produced on this channel.
Guys, you are one of the best things that happened to youtube. Absolutely love your content and can't do anything alse than keep recommending it to friends, glad this series is on: I needed a fix of bad obsession motorsport!
I am sooo happy right now it was rough not getting my bad obsession Motorsports fix for like 2 months but now 2 in 2 weeks did Christmas come early, lots of appreciation from a happy Canadian
Me at 16:21 "who tf is victoria mitchell?" Me a little over a minute later: "Well, £39 is a little steep, but it does say their cardboard cut outs match the celebrities height and I got plenty of use out of Carol Voorderman before she went floppy"
THIS is not real: can you not spot a fake nowadays??? Watching Trump too much makes people believe everything they see/hear... These current guys are just 2 cunning linguists, faking it (probably Russian influencers). Proof = no jug boiling, no Nick brackets, = no cutting, grinding, welding, over-engineering... Biggest give-away: how come these fakes can do stuff in ONE week!!!!! If you watch carefully, you'll see the digital fakery.....
Hang on guys, its only been 6 days since the last video! What the heck is going on! Is this what happens when someone else makes Nicks brackets for him? 😂
Do you really want to watch seven more years of making brackets? Had that been my mini project taking that long I'd set fire to it long ago! Havent watched many 'Binky' episodes because of that it seems to never ever get finished.
@@thatdudeinorange2297 Your loss man, probably the single best automotive series I've witnessed on RUclips so far. I almost hope it *never* ends myself!
These episodes are coming so quickly youtube didn't even put the series in my recommended until ep. 3 came out! Good luck guys, and thanks for helping us get through this 😊
Always a good episode. Nice seeing some Milwaukee power tools. Hopefully they’re now sponsored. Being in the UK Tengtools should send them a truckload of goodies. They deserve the schwag.
Your videos always make me smile. I so enjoy watching you rip into a car. In the former North American Colonies, the "Jubilee Clip®" is a "hose clamp", while the the "Mole Grip®" is the "Vise Grip®". You can see the brand name in the top picture in the Wikipedia "Locking pliers" article. When I worked for General Motors 40 years ago that "bottom arm" in front was called an "A-frame", from the shape.
It was kind of nice seeing you not knock the rust off and paint the bits ya pulled out for a change. Nice reminder that it's a working car. I watch far too many restoration videos! Great video. Thank you!
It would shock and distress the average car owner to learn just how much of the maintenance and repair of their precious baby involves beating on it with a heavy lump of steel.
I do learn a lot about my own car; how it is assembled and how it’s looking underneath certain shells. So, thank you for that (and your fine sense of humour!)
"Twatt" is the same thing for some reason and apart from being a place name upload.wikimedia.org/wikipedia/commons/thumb/e/e4/Twatt_Orkney_Road_Sign.JPG/450px-Twatt_Orkney_Road_Sign.JPG Twatting something means the thing these guys refer to.
The feeling I get when your videos come on is so similiar to what I felt in my youth when the latest Amazing Spider-Man comic book comes out and on display at my nearest bookstore. Amazing ... only difference is that you’re real
@@jeffsymons7084 no, this car is amazing, won't break the bank and if it does break you buy a cheap replacement part, pay next to nothing on fuel service and road tax. If you know a car which is better and or cheaper, I would be interested ofcourse.
Didn't feel like cleaning off all that gunge and rust? Surely being under the car later on and not having stuff falling in your eyes is worth it? Also lightweight!!! I haven't seen so many Airplane or Monty Python references since the 70s....
I am UK based and every time I have done a job like that I like to clean up and paint, Hammerite or Powder coat but powder coating can take a week or two
11:40 I take it that's an in gag relating to one time, someone forgot to close the jack valve....? I'm asking for a friend, as you'd never catch me doing that. Obvs.
JamesUKE92 There’s a scene in that movie where John Cleese is running towards a castle and the guards are just staring at him. The scene repeats a few times, just like this one.
The kit contained a full roll cage, race exhaust, full coilover suspension setup, 4 race wheels, 4 race tyres, and a bunch of other stuff for £2900! That's a pretty darn good deal.
This looks like a good project for the 17 year old's out there, to do on the mum's driveway, after of cause. Begggggggggggggggggggggggggging mum for her old car. PS cleaning the car might get one mile a hour more out of it.
WurstExpress #616 Nik and Richard are based in the UK, and they had a national lockdown from late March to late July banning all non essential travel; they were basically stuck in their homes for 4 months.
“Which requires a special kind of knob, which we’ve got” *confused look*
Had me rolling 😂
Despite all the uncertainty in the world right now, you can be certain that if one of these guys needs a dumbbell, knob or anything else vaguely insulting, the first thing that will happen is a jump shot to the other guy 😅👍
Joseph Karl it’s good to know the universe has a sense of continuity lol
Could see it coming eh, classic BOM humour.
@@mloxton1970 could see it coming a mile off. Laughed anyway
I spilt my tea with... Better than that scabby old bush
These videos arriving so quickly - it's like time travel with Tetleys.
Martin Dix Or with ToT.. Les in UK
Obviously an easier job than Binky. Move your ass, guys... :)
i am scared that this tempo is illegal
DONT jinxx it 🤣
I like that comment, complete with tetleys
"Overkill is my second favourite kill"
Would you mind putting that on a t-shirt, I'm a structural engineer and the wife always accuses me of the overkill thing when I'm making stuff for the kids to play on...
As a fellow engineer, I second this.
110%
As an electronics engineer who builds control chips for satellite power supplies I can say this: Overkill is the only way!
@@InitialDIYmods As a plainclothes tinker who just like things to work, I third this!
@@TheRapand As an electrician/consumer electronics repair guy and spare-time tinkerer I fourth this!
To change the bushes:
A/ Disassemble car
B/ Change bushes
C/ Re-assemble car
Reminds me of an old Kubota tractor workshop manual, where items from the periodic inspection checklist included the step "remove engine from the clutch housing" :D
I love the way you've precisely defined the challenge "for the price of a reasonably high end Sim race set up".
With that criteria, good man maths could easily justify anything up to and including a 911 GT3
You've forgot the easiest and cheapest mod to make your racecar faster: High compression washer. There's 15 kilo's of excessive weight in that thing, and with those power levels, all of it counts.
I'm noticing a dearth of CAD and brackets and an excess of ferric oxide.
That seat will need a bracket I'm sure... Lol
Exhaust rubbers had a bracket to keep them on. AKA a Jubilee clip.
This series does not help in resisting the urge to convert my 1st gen Honda Jazz into a little hillclimb machine...
Great videos as always!
All this lubing, twatting, sliding in bushes...y'all gonna get this account suspended
"But officer, that's not what I meant - honest!" 😅😅😅😅
If double entendres are banned I'm walking off the edge of the Earth.
@@imouse3246 Which one?
oh right
ruclips.net/video/Cb6SV4Dvi6M/видео.html
That's okay, they'll just remove the suspension.
Loving this series so far - it's going some way to fill the cavernous void in my heart that only a Binky update will ultimately fill 👌
"Anti-tamper bolt"
BOM: *immediately start tampering with it*
What to call a legally mandated tampering?
It's like the warning "no user serviceable parts inside" it's an invitation to see just ow unserviceable they are 😊
There never was anything better than successfully tampering to quickly get into things with supposed tampering prevention, right?
@@flyinghaddock3005"No user serviceable parts inside' has only one correct response "Challenge accepted", similar to "Warrant void if removed"
"Anti-tamper bolt"
Tamper tantrum initiated
Got to love modern cars eh?
Strut replacement. Step 1: remove windscreen wiper.
😤
🏁KLUTCH°58°KUSTOMS🇬🇧 I agree. Peugeot 308 - remove wiper arms and plastic cover - disconnect wiper linkages - now you can remove the strut nuts😡
Or service the HVAC
Step 1: remove the entire dashboard.
So compact, not only are the headlights hugging the doors, the front springs are under the dashboard. You can adjust them from the glove box
On some jaguars you need to remove the front wiper assembly to change the cabin filter. Just because.
Just put a Tow bar on a VW T5, 30 min fitting the toe bar. 3 hours of crap to get there, 3 more to put it all back on......oh and 25 min of buggering about with the wiring!
I’ve realized that I enjoy watching BOM regardless of which vehicle you guys are working on.
Well, the fun lies in the guys working on the cars and not so much in the cars...
2 episodes within a week of each other. This is BOM, but not as we know it.
2020 manifests in strange ways
Luckily there was a two month hiatus before this, and were still waiting for paint and trim for Binky!
I'm dreaming! I know it!
it must be the lack of brackets that account for the speed.
@@chrisbassaragh7283 But is that really what we want from Bracket Obsession Motorsport?
"To make it easier to remove the struts, the wiper arm comes off"
Me, who has only ever worked on old cars: **frowning intensifies**
I spent a solid 5 seconds waiting for the punchline, until I remembered how tightly packed the front end of that car must be. :-)
It'd be very Colin Chapmanesque to use the same bolt for the strut and the wiper arm.
@@Stereomoo Me, too, instantly was thinking of Mr Chapman's creative genius when it came to impossible triple use of vastly underweight parts, but it turned out that Toyotroën just put two layers of things in the way of service access like every other car hack calling themselves "engineer" these days.
To remove the rear wheel on my bike i need to remove the front mudguard lol.
@@SF-tb4kb I had a vauxhall cavalier that required stripping the entire dash from the drivers door to the centre console in order to replace the bulb in the clock.
If in doubt give it a clout. I asked my mentor 26 years ago when I was a wee apprentices mechanic what’s the first tool I should buy and he replied with a bloody big hammer hammer, he was I wise man
Ah a man's 1st big hammer. A thing to cherish.
@@ursixx until you misteriously break it trying to remove old brake disc nuts
15:58 " Well I can do it, but it's much easier if you help me"
Me: *looks promiscuously at my girlfriend*
GF: "I have a headache" *rolls eyes*
Hands down the best car related channel on RUclips
Shows the enthusiasm for this channel when around 50 percent of the subscriber total have seen the video in only 24 hours. Great work guys. Keep it up.
Not going to lie, I don’t think a simulation chair will need a hydraulic press to put it together.
Maybe but my press was only a couple hundred bucks and it has paid for itself many times over.
I mean how expensive is it to go to a welder or fabrication shop to do a simple press job .
@@yousefabdulrhman858 most placed won't even charge you £20 to do it haha if you've done all the prep yourself
Swing presses are cheap and most will already own several
@@yousefabdulrhman858 Shop rates will very, but lets say it is 100 bucks per hour. Now most garages start the clock with an hour even if the job takes 20 minutes. If you have to do this a few times, you'd be better off buying a proper press. My press is 50 ton and I bought it used for $200. I have used it many times and will again and when I am done with it (or die), my kids can use it or sell it for a few hundred bucks.
Damn. That was a very quick 24 minutes. No sooner had I started watching it, it was over. Bring on part 3
15:34 Seeing Nik smirking in the reflection is hilarious XD
And having a wank...
These grassroots race series are the best thing.
It takes a lot of the budget and knowledge handicaps out of racing! All these mods would be documented so ever someone with little mechanical experience can do it.
Its great for youngsters starting out and healthy for the sport
16:18 "...the inside being filthier than Victoria Coren Mitchell..." that got me spitting my tea!
I know why I usually tend to not eat or drink while watching these two...
@Tone. I prefer the bigger screens On those small ones, I often miss out on details.
@@Timberwolf69 Victoria Coren Mitchell's details are still plainly visible on a smartphone.
@@chrisenright7003 I wasn't referring to her, though. (I actually don't have a clue who she is...)
The details I was referring to are the intricate brackets that are quite often being produced on this channel.
@@chrisenright7003 they are visible from near Earth orbit
What makes these videos so bloody amazing is the two fantastic guys in them. Comedy entertainment mixed with knowledge.
"Mmmmmm shiny" Only the best popculture for these guys 😅
And one I hope they never remake, the original is just too priceless!
Guys, you are one of the best things that happened to youtube. Absolutely love your content and can't do anything alse than keep recommending it to friends, glad this series is on: I needed a fix of bad obsession motorsport!
Ah always a good evening when a new BOM episode comes out.
Shout out to the other fans jumping for joy at the weekly update here 👌🏼
Love this series, but can´t wait for you guys to continue working on the Escargot!
“Make the noise” is back😎
I hadn’t realised just how much i had missed the excited “Make the noise?!?!” Until Rich said it, bloody hell, i missed it
Really getting spoiled here with those regular uploads!
Love the intro music, who’s the fan of The Mighty Jingles then?
that's where i knew it from! thank you
Hey! Didn't expect to see other salt miners here. Yeah, I keep expecting to see burning TOGs when I start these vids.
Kyle Everly I managed to sneak out of the mine to post this and get back before I was missed 😉
I am sooo happy right now it was rough not getting my bad obsession Motorsports fix for like 2 months but now 2 in 2 weeks did Christmas come early, lots of appreciation from a happy Canadian
Me at 16:21 "who tf is victoria mitchell?"
Me a little over a minute later: "Well, £39 is a little steep, but it does say their cardboard cut outs match the celebrities height and I got plenty of use out of Carol Voorderman before she went floppy"
I was trying to eat a kebab when you said "scabby old bush" cheers for that!
You're worried, I'd got as far as a yogurt!
@@twotone3070 🤮
I sure miss the 70s
Absolutely brilliant as always, never fail to put a smile on my face!
Total legends!
Imposters! Again an episode with not a single bracket being made! This can't be real!
Anyways, enjoyed it very much!
THIS is not real: can you not spot a fake nowadays??? Watching Trump too much makes people believe everything they see/hear... These current guys are just 2 cunning linguists, faking it (probably Russian influencers). Proof = no jug boiling, no Nick brackets, = no cutting, grinding, welding, over-engineering... Biggest give-away: how come these fakes can do stuff in ONE week!!!!! If you watch carefully, you'll see the digital fakery.....
Oh boy, with this new release schedule I really picked the wrong month to quit amphetamines.
I would say I quit beer and bourbon, but unfortunately ( 😎 ) that has almost doubled since the beginning of the year.
Colin Chapman salutes you
Wow lads, I was looking forward to seeing this sometime in 2030. Nice one. What a super pleasant surprise!.
Hang on guys, its only been 6 days since the last video! What the heck is going on!
Is this what happens when someone else makes Nicks brackets for him? 😂
7 days!!
Do you really want to watch seven more years of making brackets?
Had that been my mini project taking that long I'd set fire to it long ago! Havent watched many 'Binky' episodes because of that it seems to never ever get finished.
@@thatdudeinorange2297 I would watch it even if it took 20 years, i would enjoy every minute.
@@thatdudeinorange2297 Your loss man, probably the single best automotive series I've witnessed on RUclips so far. I almost hope it *never* ends myself!
@@thatdudeinorange2297 I think you're alone with this opinion. But I respect your opinion, although it's wrong.
Great build and clever take on the lancelot scene Monty Python and the Holy Grail!
I'm not sure I'm ready for so much content so quickly. This relationship is moving too quickly for me.
This makes me so happy that you guys are back for the kettle on and everything
Weekly BOM, this is a dream
Removing the wiperarm for suspension work. Wonders never ceases.
Great vid!
Looking forward to see the last progress on the car - congrats on the win at Silverstone!
These episodes are coming so quickly youtube didn't even put the series in my recommended until ep. 3 came out! Good luck guys, and thanks for helping us get through this 😊
Always a good episode. Nice seeing some Milwaukee power tools. Hopefully they’re now sponsored. Being in the UK Tengtools should send them a truckload of goodies. They deserve the schwag.
Unlike others who are sponsored to use inferior powertools.
@Tone. more like MCM who know where Thier sponsors interests lie. Deboss is Milwaukee sponsored though.
In these difficult and trying time, you provide genuine entertainment and knowledge. Respect 👍
"Lube up thoroughly the inner part of the bush, then just slide it in!"
Nearly spat out my drink, laughing!
Your videos always make me smile. I so enjoy watching you rip into a car. In the former North American Colonies, the "Jubilee Clip®" is a "hose clamp", while the the "Mole Grip®" is the "Vise Grip®". You can see the brand name in the top picture in the Wikipedia "Locking pliers" article. When I worked for General Motors 40 years ago that "bottom arm" in front was called an "A-frame", from the shape.
My cup runneth over. It's genuinely, actually, really weekly!! Bloody hell!
Bigger cup needed?
@@ferrumignis That's clearly madness, the choccy hobnob would sink to the bottom!!!!! :0
Am I the only one who is mesmerized by the cordless drill he's using? Such a great tool, mate.
This is amazing, i just finished watching part 1.
You two are clever, entertaining and humble guys. I wish I had some friends like you.
You hear the phrase; "To get better access to the suspension, we removed the windscreen wipers"...and you know it isn't a huge car.
100% the best thing I've watched on RUclips!!! I WANT IN 😲
When you’re about to head to bed an you refresh your subscription list....ah well Sunday sleep in then
Ah well, its a sunday, get yourself some proper rest mate
It was kind of nice seeing you not knock the rust off and paint the bits ya pulled out for a change. Nice reminder that it's a working car. I watch far too many restoration videos! Great video. Thank you!
I just thought that the new episode should be coming up soon. 30 seconds later the notification came
Love this channel!
I have just spent the best part of all weekend watching “Project Binki” I can not wait to see episode 33
Correct about victoria coren mitchell.......
Whoooo and hooooo!
11:20 That part where it took forever to jack up had just the right amount of silliness and humor to it
I like the bit where the jack was squeaking.
Recovering from a hernia op. This has made my week. Thanks lads.
Weirdly...me too. Obligatory BOM hernia fanclub massive.
We want more Binky! 😂😂
Thanks, got my fix for a while, still waiting for Binky.
This must be the best car channel.
did I spot you doing a Gareth Hunt coffee advert impersonation in the reflection of the wing?
Really enjoying these. Just the right amount of useful information, backed up with just the right amount of humour.
i love how much of building a race car require large hammers
It would shock and distress the average car owner to learn just how much of the maintenance and repair of their precious baby involves beating on it with a heavy lump of steel.
I do learn a lot about my own car; how it is assembled and how it’s looking underneath certain shells. So, thank you for that (and your fine sense of humour!)
The Totaliser theme tune has a distinct hint of The Professionals theme. :)
Having been used to episodes MONTHS between, having regular videos like this is like a motorsport overdose and I am all over it like a rash
Twatting stick must have a different definition in the UK.
Twatting stick is the name I gave my.....
"Twatt" is the same thing for some reason and apart from being a place name
upload.wikimedia.org/wikipedia/commons/thumb/e/e4/Twatt_Orkney_Road_Sign.JPG/450px-Twatt_Orkney_Road_Sign.JPG
Twatting something means the thing these guys refer to.
In this context it is a derivation of the old Norse "To repeatedly beat something soft with something hard"
It's quicker than saying 'Manually operated swing persuader'
Percussive maintenance is a good one.
An excellent demonstration of the proper use of calibrated tapometers
loving the "moose" homage, to Monty P!!
The feeling I get when your videos come on is so similiar to what I felt in my youth when the latest Amazing Spider-Man comic book comes out and on display at my nearest bookstore. Amazing ... only difference is that you’re real
I feel it's my responsibility to point out the juvenile giggle fest the dialog in this episode offers...
Bush
Thanks for making your videos guys, I use them to go to sleep at night instead of ASMR
When their "budget racecar" is worth more than your daily "Only car" :'(
It's quite a bit cheaper than your average spec Miata venture, but more expensive than most young car nuts can afford. At least there's go-karting.
Maybe buy a better car instead of whining about it on the internet.
@@jeffsymons7084 no, this car is amazing, won't break the bank and if it does break you buy a cheap replacement part, pay next to nothing on fuel service and road tax.
If you know a car which is better and or cheaper, I would be interested ofcourse.
@@BrawlerTheSmokyDutchMan Wtf are you talking about? What car?
oh yeah
ruclips.net/video/Cb6SV4Dvi6M/видео.html
Always... best music ever! Some RUclipsrs music is an afterthought.... like nails on a blackboard. BOM music always ROCKS!!!!!!!!
Didn't feel like cleaning off all that gunge and rust? Surely being under the car later on and not having stuff falling in your eyes is worth it? Also lightweight!!!
I haven't seen so many Airplane or Monty Python references since the 70s....
Yeah doing that actually bugs me, why do all this on a dirty car... unless they're gonna clean it on a lift?
Canny race trick. Car weighs in legal at start of race weekend but becomes progressively lighter during the races as bits fall off.
I am UK based and every time I have done a job like that I like to clean up and paint, Hammerite or Powder coat but powder coating can take a week or two
Yeah not sure why they wouldn't spend a minute to take the rust off with a wire wheel and chuck a bit of paint on there
@@tomb9818 Because they know best of everyone how a project can spiral out of control and take a lot longer when you start getting fancy.
The raw treatment of this car is refreshing men 👌👌
"It's held in by an anti-tamper bolt"
*tampering with bolt*
7 years and you finally used the words ugga dugga. Thank you! :D
It does take some wrestling to get my shaft inside a bush as well.
I missed last week episode so now I got to see 2 in a row! What a bless!! ;)
"The supplied lube is smeared all over the shaft"
Bush.
Happy to watch a video about a car I might be able to own. Actually it's quite similar to the Aveo I'm building. So thank you! Very much.
Notifications? ✅
Kettle? ✅
It's BOM time.
you two have been missed...Thanks for the new videos. Keep it up. Keep well and stay safe.
11:40 I take it that's an in gag relating to one time, someone forgot to close the jack valve....? I'm asking for a friend, as you'd never catch me doing that. Obvs.
CookRacing UK For some reason it made me remember the Trojan rabbit scene in the Holy Grail
JamesUKE92 There’s a scene in that movie where John Cleese is running towards a castle and the guards are just staring at him. The scene repeats a few times, just like this one.
@@mprecup Ah makes sense!
mprecup haha, that must have been the subconscious connection then 😂
I'm over here looking for Part 3 and I realize this was posted today. Really rad stuff lads!
The kit contained a full roll cage, race exhaust, full coilover suspension setup, 4 race wheels, 4 race tyres, and a bunch of other stuff for £2900!
That's a pretty darn good deal.
This looks like a good project for the 17 year old's out there, to do on the mum's driveway, after of cause. Begggggggggggggggggggggggggging mum for her old car. PS cleaning the car might get one mile a hour more out of it.
Best channel on YT 👍🏻
This all good and all but where is binky and the escargot.
the Pandemic put a serious damper on both projects.
@@digitalrailroader why?
WurstExpress #616 Nik and Richard are based in the UK, and they had a national lockdown from late March to late July banning all non essential travel; they were basically stuck in their homes for 4 months.
The "special knob" comment killed me :D
Keep up the fantastic work guys - you're the best!