CF Moto Uforce 600 Horn and Turn Signal install
HTML-код
- Опубликовано: 18 апр 2024
- RecNation Ep025
The UForce 600 gets a horn, turn signals, hazard switch and flasher installed.
CF Moto Part Numbers
Horn Kit 6060-150600
Horn Switch 5ASV-169040-6001
Turn Signal Switch 5ASV-169060-6001
Flasher 5ASV-150340-6000
Hazard Switch 169070-6001
Curt Taillight Converter 56175 Спорт
great video
Glad you enjoyed it
Great video!
What year is your uforce 600? I have a 2022 600, parts are not listed for my year, I assume it is the same?
Thanks -Jonnyrooster
Mine is a 2022 and the parts listed fit. If you notice in the video, the turn signal blinks faster when you hit the brake. The Curt adapter was listed when I searched LED compatible. I'm testing others now to see if there is a better fit and make an update video. Otherwise it was a pretty easy install.
How is the machine holding up and have you adjusted the valves? Some say they don't touch them but the manual says they should be adjusted at 20 hours.
It is holding up really good. I have not adjusted my valves yet and it has just over 300 miles on it. The valves are not making noise and seem to be good for adjustment. I plan to do a quick maintenance on it for changing oil for the summer and a grease job.
Would anyone have information on installing the flasher on a 2023 Uforce 600? It's a different part number (5ASV-161000-7801) and appears to be in a different location. I found written instructions that say "Connection plug located under steering column, attached to firewall." But I'm not seeing it.
That is the correct part number according to cfmotousaparts.com/ I am not sure on the install. Open the hood and follow the wire harness out of the bottom of the fuse box and look for a loose plug. That is how I found this one no the 2022. They are good about zip tying unused plugs out of the way. My guess is you will see a place to screw it to the firewall above the brake master and the plug will be in that area too. Let me know if you find it.
I found the plug. It’s inside the cab, below the steering wheel and above the brake pedal on the firewall. You have to remove about a dozen screws and two pop rivets, then pull back the bottom plastic tray/molding on the driver side. Wasn’t difficult, but it’s well hidden. You can’t see the plug until the plastic is pulled back.
Where you get the turn signal stuff
Hello, I ordered the switch and flasher from www.cfmotousa.com and ordered the tail/brake light converter from amazon.com.