Thank you very much! I bought the toyota and had the bull bar already installed but something didn’t seem right, now that I have watched your video I know it’s missing the second set of brackets that you installed, somehow the previous owner managed to installed it without it (very crapy job) I took it out and will buy the right stuff to install it properly. Your video is very clear on how to install. Keep it up buddy I’m subscribing for sure.
Hi, I got the Bull Bar, but it came incomplete. I need the 4 braquets and all the washer, bolsa and nuts. Can You tell me where I can buy all those thinks ???
Unfortunately, I don't have the bull bar anymore to take measurements. 5 inches should be long enough though. You can measure the width of that part of the frame and the thickens of the brackets to double check
Excellent video! It would have taken me hours using the instructions that came with it. Mine was a little different on the install. There was quite a bit of plastic from the bottom forward of the wheel wells interfering, and my didn't have the front air dam mine is a TRD though so maybe that's the difference?
wont the bar block the sensors on the bumper or give wrong readings? will these work on 2021 Highlanders? My concern is my front bumper and grill has lots of sensor, cameras etc
😪 I cant do that! No tools, also I bet my 2001 wouldn't go so smoothly. I sure miss my dads barn a.k.a car shop for himself and all the tools & assistant If I needed . Labor isn't cheap . I knew I should have bought a truck already done like I wanted . Sorry for rambling. Great video!!
@@KFloTacoma I'll probably end up selling it for the price I paid and buy one how I want it. Lol I had a sweet 98 I bought it was just sweet I paid 16k but ,I had a work company truck wife was putting the guilt trip on me. I sold it ....and let her go later too.
No, it will require a specialized bumper. These Bull bars aren't designed to hold the weight of the truck. You'll need something like these: www.extremeterrain.com/body-armor-4x4-tacoma-hiline-series-front-bumper-tc-19339.html?AT%20Bumper%20-%20Front%20Bumpers%7CBody%20Armor%204x4&T5_Var4=TT6408&XTT+Tacoma+Vehicle+Medium+RLSA&dialogtech=ppc&T5_Var2=shopping&gclid=CjwKCAiAirb_BRBNEiwALHlnD1cEoQ4JQ50pf5t5wE4ygQT6WQU3G-pKn3-ovyHcyAii9JCIyoyM7RoCOmIQAvD_BwE&gclsrc=aw.ds
If this video helped you out, please donate! beer.kflo-krib.com/
Link to the Bullbar: amzn.to/3FHsKXb
Luv it bro! I'm 48 and finally bought my 1st 2015!!! U Killin it
Good install review. Seems like you really took your time and nailed it.
Thanks Chris! I'm glad you enjoyed the vid. Feel free to share these vids with any of your friends who own tacomas!
Thank you very much! I bought the toyota and had the bull bar already installed but something didn’t seem right, now that I have watched your video I know it’s missing the second set of brackets that you installed, somehow the previous owner managed to installed it without it (very crapy job) I took it out and will buy the right stuff to install it properly. Your video is very clear on how to install. Keep it up buddy I’m subscribing for sure.
Good job, even better video ! Very detailed information !
Great video one question how far is the best distance between the bar and the bumper?
1 inch should be sufficient
Excellent instructional video!! Couldn’t be clearer!! Thank you!!
Hi, I got the Bull Bar, but it came incomplete. I need the 4 braquets and all the washer, bolsa and nuts. Can You tell me where I can buy all those thinks ???
If you bought it using the link, it should come with the hardware and brackets. I would recommend contacting the manufacturer
I bought a used bull bar. its really nice but didn't come with the bolts. how long are those long bolts, about 5'' ?
Unfortunately, I don't have the bull bar anymore to take measurements. 5 inches should be long enough though. You can measure the width of that part of the frame and the thickens of the brackets to double check
Excellent video! It would have taken me hours using the instructions that came with it. Mine was a little different on the install. There was quite a bit of plastic from the bottom forward of the wheel wells interfering, and my didn't have the front air dam mine is a TRD though so maybe that's the difference?
wont the bar block the sensors on the bumper or give wrong readings? will these work on 2021 Highlanders? My concern is my front bumper and grill has lots of sensor, cameras etc
Yes, and probably. You can reach out to the manufacturer and they can give you a more accurate answer.
I see other videos where they remove the grill to getto the bolts. So that really isn't necessary ?
Thanks for the video. Just installed mine. Couldn't have done it without your help the paper directions were sketchy.
I'm glad to hear! Thanks for supporting the channel!
Looking Good!
Great video and tutorial!! Looks good too!
What if you want to keep the air dam? I have a 2020 Tacoma. Will I have to cut slots in the air dam to get the bar to fit? Thanks!
I'm not sure how the 2020 are built. If the air dam does block that part of the bracket in front of the skid plate, then you may need to remove it.
Just installed it! Great tutorial!
Thanks for the details -jay
😪 I cant do that! No tools, also I bet my 2001 wouldn't go so smoothly. I sure miss my dads barn a.k.a car shop for himself and all the tools & assistant If I needed . Labor isn't cheap . I knew I should have bought a truck already done like I wanted . Sorry for rambling. Great video!!
I'm sure you could do it. I would advise just to take your time and review your work as you go through it
@@KFloTacoma I'll probably end up selling it for the price I paid and buy one how I want it. Lol I had a sweet 98 I bought it was just sweet
I paid 16k but ,I had a work company truck wife was putting the guilt trip on me. I sold it ....and let her go later too.
Thanks but I'm in a apartment building now I couldn't do anything car work here in one tiny space .
100% huge help bro, thanks for the video 🙏🏻
Nice job. Thanks man.
great! Thanks for watching and supporting the channel!
Does the factory ski plate and hooks need to be removed? Thanks for such a great video!
Thanks for the kind words! No need to remove them.
This was perfect. Thank you!
Haha, literally the same one I purchased. Now I am ready for autumn (a little protection against the deer) and my truck looks BOSS!!!
Gr8 video!very informative,it's really gonna help,thks
I'm glad you enjoyed it! Do me a favor and share this with any of your tacoma friends!
Is it possible to install a winch now?
No, it will require a specialized bumper. These Bull bars aren't designed to hold the weight of the truck. You'll need something like these: www.extremeterrain.com/body-armor-4x4-tacoma-hiline-series-front-bumper-tc-19339.html?AT%20Bumper%20-%20Front%20Bumpers%7CBody%20Armor%204x4&T5_Var4=TT6408&XTT+Tacoma+Vehicle+Medium+RLSA&dialogtech=ppc&T5_Var2=shopping&gclid=CjwKCAiAirb_BRBNEiwALHlnD1cEoQ4JQ50pf5t5wE4ygQT6WQU3G-pKn3-ovyHcyAii9JCIyoyM7RoCOmIQAvD_BwE&gclsrc=aw.ds
I Appreciatte so much...it help me a lot and give satisfation to do it myself and extra bonus ...save some $$$$
Glad it helped! Thanks for supporting the channel
GREAT instructor!!!!!!!!!!!!!. You should give lessons on how to instruct.
I would recommend checking out my more recent and complicated videos. You'll enjoy them as well! Thanks for watching
What year is the tacoma
Thank you for this video
It is of big big help,
Thanks a lot! Please help my channel grow by sharing my vids with your Tacoma friends!
im not worried about the 3 inch loss of front clearance, id rather scrape up my bull bar than crumple my front bumper
Have problem my did not come instructions 2004 toyota tacoma
what lift do you have on your truck??
Watch my walkthrough video in this channel - it details everything you need to know
What kind of bull bar is this - brand? The link is broken. Can you please post the brand? Thank you!
Sure! Its actually on my Amazon page too. Go to Amazon.kflo-krib.com
Nice vid bro! Keep it up! Wonder if this bull bar fits in a 2017 Tacoma
They have a different version that fits on the third gen. Just make sure you put in the appropriate years
is this a prerunner?
2009 TRD sport 4x4
KFlo's Tacoma Build nice! I recently got a 2006 prerunner sr5 and im thinking about putting a bar on the front.
Sweet! It's a pretty easy upgrade. Congrats and Enjoy!
KFlo's Tacoma Build Thanks man!❤️
Great for defeating airbags from deploying
does bull bar affects tacoma TSS?
I don't have a TSS, I would assume so.
Is this the same install for 2018 Tacoma
No. Its only for an 05-15
Nice vid bro, link is broken...
Thanks for the heads up, brother. I just fixed it!
Looks good, are you khmai?
I'm Pinoy, bro
what size tires?
285 70 R17
How'd u get those nuts off... mine are stuck on there
They're lock nuts so they'll need a bit not effort to take off. Use a breaker pipe on the wrench and it should come of
Does the oem skidplate get deleted?
Nope. The skid plate stays on.
1) it's not Teeota it's TOYota.
2) Your bull bar link no working home slice.
Thanks for the heads up, bro. Here's the updated link: amzn.to/3CzVT4c