This fixed the e90 error I was getting. Just got the washer fixed with a little hubby help. Great video. Walked us through it step by step. Ordered the part from you guys. Got it in two days. Fixed the washer in less than a hour. That’s only because I dropped a piece inside the open washer. But we opened the access panel and got it right out. Closed up then back to business. Ran a hot cycle to clean the washer then back to normal use.
Thanks you guys! I just replaced this part and have my first test load going....hoping that this was the right fix for the problem I was having, however, if it wasn't I'll be sure to consult your troubleshooting diys!
hello! Thanks for the great video. I have replaced the user interface board on my TRW10 (electrolux) and now I get an E92 error in the panel when I try to run diagnostics. The LEDS on the left (on the smaller board, next to the rotating button) dont light up, but all the rest does. If even seems to start the cycle, shows up time and everything, but never actually lets water in. What I am doing wrong?
You're welcome! On an Electrolux, the E92 error code means "User Interface to Main Board communications error". This code typically appears when you replace the user interface control or electronic control board using the wrong part. Give us a call, and we'll help you figure out what the correct part is for your particular unit. We will need your model number (TRW10 isn't coming up as valid for me), which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Quick question....would an E23 error cause a loud buzzing sound from the lower back left of the machine after you press Start? - FRFW3700LW0 - FRIGIDAIRE FRONT LOAD WASHER 3.8 Cubic FT Model...no display, had to count lights flashing to get code.
Hi, my Frigidaire affinity washer from 2009 is giving off an electrical burning smell. Also, now it won’t start at all and says only “Sensing” but does not move to “Washing”. Can you help? Thank you!
Hello , I've been having some issues, my affinity washer has has its door lock replaced some time ago and problem was solved, recently its been doing the sa mg e thing as before, so I replaced the lock once again but it still stopped in the rinse cycle, i saw a video on how to run a diagnostic so I ras one and it threw a EbE code , which says control module, am I correct in thinking I need to replace now the control module.?
I pulled the black knob out of the old control panel but I'm having problems getting it to pop in the new control board. I have to use a lot of force and I don't want to break anything. Can anyone help?
If you need additional help with the repair outside of what's demonstrated in the video, you can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.
This fixed the e90 error I was getting. Just got the washer fixed with a little hubby help. Great video. Walked us through it step by step. Ordered the part from you guys. Got it in two days. Fixed the washer in less than a hour. That’s only because I dropped a piece inside the open washer. But we opened the access panel and got it right out. Closed up then back to business. Ran a hot cycle to clean the washer then back to normal use.
That's great to hear! We're glad we could help you out with your repair.
This is a highly brilliant how to fix video.
Thanks you guys! I just replaced this part and have my first test load going....hoping that this was the right fix for the problem I was having, however, if it wasn't I'll be sure to consult your troubleshooting diys!
Thank you so much for this video!!! Was easily able to replace control board on my own and saved big $$ not calling someone else!!!
You're welcome!
hello! Thanks for the great video. I have replaced the user interface board on my TRW10 (electrolux) and now I get an E92 error in the panel when I try to run diagnostics. The LEDS on the left (on the smaller board, next to the rotating button) dont light up, but all the rest does. If even seems to start the cycle, shows up time and everything, but never actually lets water in. What I am doing wrong?
You're welcome! On an Electrolux, the E92 error code means "User Interface to Main Board communications error". This code typically appears when you replace the user interface control or electronic control board using the wrong part. Give us a call, and we'll help you figure out what the correct part is for your particular unit. We will need your model number (TRW10 isn't coming up as valid for me), which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Quick question....would an E23 error cause a loud buzzing sound from the lower back left of the machine after you press Start? - FRFW3700LW0 - FRIGIDAIRE FRONT LOAD WASHER 3.8 Cubic FT Model...no display, had to count lights flashing to get code.
You make it clear as day even for an old man with poor short term memory.............now I can fix my toaster,
Hi, my Frigidaire affinity washer from 2009 is giving off an electrical burning smell. Also, now it won’t start at all and says only “Sensing” but does not move to “Washing”. Can you help? Thank you!
Hello ,
I've been having some issues, my affinity washer has has its door lock replaced some time ago and problem was solved, recently its been doing the sa mg e thing as before, so I replaced the lock once again but it still stopped in the rinse cycle, i saw a video on how to run a diagnostic so I ras one and it threw a EbE code , which says control module, am I correct in thinking I need to replace now the control module.?
I keep getting error code E61 causing my dryer to work but not heat!! I tested the element and fuses they all work.... is this what I need!!??
I pulled the black knob out of the old control panel but I'm having problems getting it to pop in the new control board. I have to use a lot of force and I don't want to break anything. Can anyone help?
At which position should I place the settings dial when I place in console?
If you need additional help with the repair outside of what's demonstrated in the video, you can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.
thanks a lot for that. It helped a lot.
You're welcome!
This solve e45 error code??
You can test the door lock mechanism with a multimeter to determine if the code corresponds to the door lock assembly or to the control board
Can I get the job in your workshop?